I have a Lenovo E531 and Upon turning the Laptop on after having it unplugged for a short period of time, it will turn on to a screen that says..."Battery Critical" or something to that effect, telling me it can't boot and to plug the machine in. So I turn off the laptop, pull the battery out, plug the battery back in and then turn it on and it boots just fine.
View 1 RepliesAfter installation updates from Lenovo Update I always get error "rundll" when I start system with message: There was a problem starting C:Program The specified module could not be found.
I have new E531 with Windows 8 and after Windows Updates was all right.
So i bought a new refurb e531 i7 3632qm 4rb ram 500gb 7200rpm drive. Machine runs awesome however As soon as i turned it on i noticed it gave a battery not geunine message from the bios had to push esc to continue.
Ignored it figured maybe it would learn the battery or something.
Anyhow its been a good 10 hours now still give me the message as well as i noticed its not charging when plugged in. In an attempt to fix this i have.
updated bios. Uninstalled and reinstalled newest power management software and driver's shutdown system unplugged power cord pulled battery and waited 30seconds and reinsterted battery then charger.
Im so far not impressed with this geunine battery firmware built into the system cant even detect their own battery !!
Yesterday my fingerprint reader worked correctly, but today I turned on my computer and I could not log in using my fingerprint reader. Then I looked to device manager and there was an unkown device. So I tried to reinstall fingerprint drivers but even though it still does not work and in device manager is "unknown device". How to make it work? I tried to install this driver: [URL] ..... I use Win7 64bit.
View 9 Replies View RelatedI have a problem with my dvd-rom. Whenever Im on battery, dvd-rom automatically turns itself off and I'm not able to turn it on again, clicking "power on" doesn't have any affect, and there is no setting in power manager that is related to this.I tried to reinstall microsoft drivers for dvd device,I tried to update PM and PM driver, but it didn't work. When I remove it in device manager and reboot system then it is ok, but this solution lasts until next boot.
View 7 Replies View RelatedI have a brand new Edge E531 that I have upgraded to Win 8.1. I am trying desperately to learn to use the TouchPad, and by tweaking the various settings I am able to get it to work ok.
Except for one thing: sometimes, it seems that the TouchPad will automatically perform the default action in a dialog box or click a button automatically.
I have gone through all the settings and see nothing related to this.
Is this known behavior? Can it be prevented?, I know I can disable the TouchPad and only use TrackPoint, but since Lenovo no longer has separate right and left mouse buttons, I find it hard to use.
I just installed Skype, mostly to test the camera, and the green light is on but I can't see anything. Skype just shows an outline of a camera with a diagonal line though it no matter which camera option I pick.
View 3 Replies View RelatedLenovo thinkpad edge e531 - How to know charge fully?
View 9 Replies View RelatedI have a new Edge 531 just upgraded to Win 8.1. The Lenovo Solution Center gives me a Virus Protection Alert - even though Norton says all is OK. When i click to enable anti-virus in the Solution Center, nothing happens. How do I cancel the message?
View 3 Replies View RelatedWhen my E531 is connected to Onelink Dock Pro and the lid is closed, at least 50% of times it won't boot up. When I open the lid, either there is a boot screen or the screen is blank. Usually when I hold the power button for a few seconds and then try again, computer boots normally. For me it seems this is some kind of a BIOS issue because Windows is not booted yet. Sometimes the problem occurs when the lid is open too. Without the dock the computer functions properly.
At first i had a BIOS version 1.23 (which I didn't found on the internet btw) and then tried to fix a problem by downgrading to 1.22. I also changed several BIOS options reagarding the booting process. I have the computer on a shelf where the lid cannot be opened.
I just purchased a Thinkpad Edge model E531. The shop transferred data from my previous laptop. I am getting an alert message that says I only have1.21G free of 13.67G on my primary drive. Is this a problem, and how can this be the case on a new machine...
View 3 Replies View RelatedSo my battery from my Thinkpad e420s Laptop was broken and I ordered a new one and exchange it. But now when I go to the Power Manager it says Battery Error and I cant charge it. And when I take out the power plug it shuts down immediately. What can I do?
View 1 Replies View Relatedjust received my new E531 Edge Thinkpad from Lenovo.
Right now I'm not able to boot from CD, it will always boot into the preinstalled Windows 8.
I've tried the F12 method to select a different boot device during startup where I can see the installed DVD RAM drive and select it, but no effect it returns immediately to the select screen.
I've played around with the various BIOS setting disabling the secure boot option and changing the boot order so that the DVD drive is first. Then the system will check for the the CD (you can hear it spinning during start up) but will start into Windows 8 right afterwards again.
I checked with various bootable CDs as well as DVDs but always same effect.
What am I missing? Any other BIOS or Windows 8 settings I need to change for that.
I have other Lenovo notebooks running like the X230, the T520 or an older T61 where booting from CD never seems to be an issue.
As the DVD drive is working correctly within Windows 8 I assume that it is in general functioning and shouldn't be broken.
Since the past couple of days I am receiving this Error 2102: Detection error in HDD2 during every cold/warm boot. It pops up even after a complete powerdown for overnight and boot up the next day. Further, the boot itself has become very slow - shows blank screen until the Thinkpad logo is displayed, followed by which the error message pops up.
Thinkpad Edge E530 - i5-3210M -upgraded 8GB RAM - 750 GB, 16GB mSATA HDD Performance Booster
When I use the battery as the power of my laptop, it always shutdown abnormally before the battery reach the “critical low battery alarm”.
For example, I set the power manager to sleep when the battery lower than 10%. However, it will out of power when the battery reaches 12-13%. It wasn’t a normal shut down, it suddenly goes down without any alarm. It seems that the power been cut down by someone.
My laptop is a new thinkpad T430s, it seems something wrong with the battery. I try to Perform Reset the battery, but it still not work.
I just got a HP Envy 17-j184nr. I also bought a Samsung 850 pro 256gb ssd to go along with it. Made the recovery discs. Put in the ssd and started the recovery process. It got all the way past the part with administrator and the second drive download, then it restarted. It loaded up and went into recovery imcomplete. Tried it twice with the same result. The retry option does nothing except sit there on "Insert recovery media" even though i've inserted every disc at least twice.
The log shows...
[6:58:36.74] ChkErrBB.CMD : Detect some error during PININST_BBV.
[6:58:36.74] ChkErrBB.CMD : Check c:system.savLogsBurnBootWarn.log
[6:58:36.76] ChkErrBB.CMD : or, check c:system.savLogsBurnBootMerge.log
[6:58:36.77] --------------------------------------------------
[6:58:36.77] Critical error condition was detected at BBV1...
I really want to start using my computer.
I have a Lenovo Thinkpad Edge E530c. The problem is that when I press the full stop (.) on the numeric key pad it comes up as a comma (.). Is there a setting I need to change to get it to work as it should?
View 2 Replies View RelatedI am getting a "Critical Battery Warning" on boot up at the user account login page. My Battery is fully charged. Does not occur when the A/C adapter is connected.
I've read this can be caused by the "Reserve Battery" being old. Computer is from 2006.
I have a studio 1537 with the Ati graphics.
The problem i have is when i power on the laptop i get a warning saying Hit F1 Critical battery warning .
So i hit F1. Then get the option to hit F1 to continue or F2 to enter setup as battery cannot be identified.
So i hit F2 so in the bios i see not battery and it says NO charger detected.
Now my problem is the battery is totally flat if i pull the PSU the system dies . I have changes the power jack as i read the could give trouble.
What I could do next as other than this my machine is perfect. Just a note i also have two spare batterys one 6 cell and one 9 cell and still neither charge
With this laptop, the CPU usage rises significantly whenever the battery is charging. If I'm on running on battery power or it's fully charged, I don't have this problem. The CPU stays at 2-3% while browsing the internet, for example. But browsing the internet while the battery is charging will send the CPU up to 90-100%. It's not just browsing the internet, but any task, such as running Sony Vegas, using Skype, watching a movie, etc.
Again, this only happens while the battery is charging. Everything runs much, much slower. All power management settings are identical whether it be running on battery or charging with the AC adapter, so it's not that. I am also using the 65w power adapter that was supplied with the computer, and the adapter becomes very hot to the touch while charging.
My E530's battery drains 5% per day after power off. I searched online and somebody else complained about similar issue on his Y-series laptop. His problem was solved by plugging off power cord before turning off the laptop. Lenovo also updated BIOS regarding this issue for his model after then.
Yesterday I tried his way and the issue was gone too. Can Lenovo update BIOS regarding this issue?
I also find the power manage scheme doesn't work. It always charges the battery from 96% to 100% in whatever scheme I chose. I tried to uninstall the driver and downgrade the power manager, still doesn't work. I didn't try reinstall the system because it is too time consuming. Does it matter I installed win7 in my SSD?
I have a problem with my battery on a brand new E430. I've used it for 1 week w/o problems and now it simply doesn't want to charge the battery anymore. It is stuck on 48% and I have a message saying "plugged in, not charging".
EDIT: I run Win 8 (64 bit) - absolutely everything is up to date, including BIOS.
i just bought a Thinkpad e535.Every time I turn off the laptop (not hibernating, not sleeping) and unplug the power cable from the Ac Outlet the battery loses around 20% of charge every 24 hours,
What I've already done to troubleshoot:
-Disabled USB always on in BIOS
-Disabled Wake On Lan from Windows AND BIOS
-Running command powercfg /devicequery wake_armed to see if any device is programmed to power on the laptop
BIOS version is the latest one (2.08)
Power Manager software is 6.32
I installed new bios update downloaded from lenovo website (file h0uj03ww.exe). Immediately after succesful update message balloon popped up saying my battery is not genuine.
The battery is original, part of the notebook when i bought it and so far the system recognized battery as genuine.
Previous bios number was 1.12, new one is 1.14
Notebook model is 3259-C5G.
Today I received my brand-new E540 from Amazon. Upon inserting the battery and starting the laptop for the very first time, I was greeted by the following error message:
The battery installed is not supported by this system and will not charge.
Please replace the battery with the correct Lenovo battery for this system.
Press the ESC key to continue.
The message has only appeared once and hasn't been shown on subsequent reboots.
I proceeded to install Windows 7 which worked fine. Under Windows the battery symbol in the taskbar would say "66%. Plugged in. Not charging". I then shutdown the system and re-inserted the battery. Since then the battery appears to be charging normally and when I inspect the battery symbol in Windows it says something like "89% charged. Plugged in. Charging."
Seeing how this is a brand-new laptop, do you think the battery is broken and I should return the laptop, or should I keep it since it seems to be working normally now.
I bought 2 of these in oct 2011 for my twins going to college. My daughters has had no problems. The other one died in may 2012 and was repaired under warranty. It died again in November 2012. I was able to get it running by removing the battery and disconnecting the cmos battery and letting it sit for a while.
It happened again, and this time I can't revive it. I want to add that I think there was something wrong when we got it back from repair. The battery icon for the Lenovo power management did not work, but the windows one did. In hindsight I think this had something to do with nvram problem I have since heard so much about.
I was trying to resolve an issue about my battery indicator and i tried getting an energy report and its giving one error... This is the message i am getting :
USB Suspend : USB Device not Entering Selective Suspend
My battery (FRU: 42t4957) is stuck at 2% and refuses to charge:
I kept it at 40-50% most of the time by changing battery threshold. Total cycle count was about 80 (84 now) first use date 2013-03.
On Saturday I tried to run a "discharge-charge-discharge-charge" cycle (by watching some movies) to reset the gauge of my battery. During 2nd discharge my laptop hibernated due to low charge much earlier than expected, when I turned it on it showed that the max capacity is 28 Wh and the battery is in the "poor" condition.
I tried to perform automatic gauge reset but didn't get much (29 Wh). I updated power manager and performed another automatic reset which failed too.
So I tried to make a manual reset and left my laptop paying a movie for a night. On Monday I plugged my AC adapter in but found out that the battery won't charge: "a battery error has occurred the battery cannot be charged".
I cleared residual capacitance by pushing the power button several times and reset the BIOS to defaults but got nothing.
If this problem can't be sold I would like to know the reason of it to avoid such things in the future. While googling this forum I met contradictory opinions on battery reset: ones say that it's extremely harmful because battery "doesn't like" to be discharged to 0%, others say its harmless.
I recently upgraded my ThinkPad T430s to Windows 8 Pro and ever since my ultrabay battery gives me an error when ever I restart or turn the machine on. It goes away after I hit ok and the battery appears to still be functioning but the error is super annoying. I have the latest drivers and software from Lenovo and I have already had the battery replaced via tech support. Its so annoying i'm tempted to see if I can just get the whole unit swapped.
View 9 Replies View RelatedI own an Edge 15, 64 bit processor. It came with 2gb RAM. I recently purchased and installed two 4 gb cards for a total of 8gb RAM. I updated my BIOS. Under "Computer>Properties" it is showing only 4 gb Install RAM. Why is it not reading or the system not using the additional 4 gb of RAM on the second card?
View 3 Replies View Related