Lenovo E130 11e E/Edge :: Speed Is Limited By SATAII Interface
Apr 12, 2013
I'm interested in thickness of HDD in E130. I read that in E125 was 7 mm HDD and there is troubles with 9 mm. So, is E130 similar to E125(E130 is next-gen of this type netbooks, but there is huge posibility that Lenovo Engineers decided not to change HDD type)? Or 9 mm hard drive will work?
Installing msata breaks warranty agreement, doesn't it? amout msata SSD(i've read about installing SSD in other Thinkpad notebooks), but I need some proves for Edge E130:
1)Speed is limited by SATAII interface?
2)mSata drive as bootable device will work?
Last questions are not such important, but i'll happy, if Edge E130/E135 users will share their experience
View 3 Replies
ADVERTISEMENT
Oct 2, 2013
I have what I think is a common problem with Edges: My E535, which I've had just over a week, will start up quietly. Then after about 3 minutes the fan will switch to high speed, even under light load (e.g.. only Firefox running, and limited scrolling or other activity). After a few minutes at steady high speed, it will begin cycling up and down, up and down, up and down..... This is getting to be moderately annoying. It does this whether the machine is plugged in or on battery. It also happens when I'm doing other things...OpenOffice spreadsheets or word documents, or even just letting the system sit idle.
I've attempted to change settings with Power Manager but for some reason, PM ends up crashing when I attempt to select a lower fan speed setting and a normal (level 10) brightness setting. Can the two problems be related? I'm presuming from similar posts for E530 and other Edges that this is BIOS related. Here is my info:
MS Windows 7 Home Premium, Version 6.1.7601 SP 1, Build 7601
Edge E535 Model 3260CTO
AMD A4-4300 M, Radeon HD
BIOS LENOVO HHET75WW (2.08), 10/24/12
SM BIOS 2.7
View 7 Replies
View Related
May 24, 2010
I just ordered a Dell Studio 14 today, and it comes with 4GB of DDR3 1333MHz ram but in the Order Status page is says that it runs at 1066MHz. I was wondering why it is underclocked. Is it limited by the bus speed? Also, if it is limited to that speed, why would they sell 1333MHz ram if the max speed is 1066MHz?
View 10 Replies
View Related
Feb 4, 2013
Just purchased new Dell Inspiron 15 (3521). Wireless will only connect at 72Mbps. After some googling found this is by design. The adapter is the Dell Wireless 1703 Adapter. Can Dell pls confirm this is the case and that there is no way to achieve TRUE wireless N speeds ? The fact that this limitation is not advertised on any product material/brochure/sales rep is a concern. Would Dell replace the adapter with one capable of proper wireless N speeds free of charge ?
View 10 Replies
View Related
Apr 13, 2011
When I place my LCD into tablet mode, sometimes my mouse wanders slowly on the screen and the touch interface seems to be disabled. After some trial and error I found that the culprit is that my TrackPoint is gently rubbing against the backside of the LCD. I found that I could make the mouse cursor move rapidly back and forth on the screen just by gently putting pressure on sides of the LCD when the laptop in tablet mode. I own two x220t devices, and this happens on both of them. My TrackPoint touch sensitivity is set 2 ticks to the left of the most sensitive setting.
I remember reading somewhere that the TrackPad is disabled when the laptop detects that the LCD is swiveled into tablet mode, so that it doesn't accidentally move the mouse. Could the TrackPoint be similarly disabled so that it doesn't generate these phantom mouse movements?
View 8 Replies
View Related
Feb 5, 2013
I just did a fresh install of Windows 8 on my Lenovo G475 and everything works fine but my wifi connection. This is what I have done so far: I...
- Installed Windows 8 and kept the laptop connected to the Internet via the ethernet card (to make sure all the installation process went smoothly).
- Updated Windows 8 via Windows Update.
- Downloaded missing drivers for Windows 8. They were: Realtek Card Reader Driver, Lenovo Energy Management and Wireless LAN driver.
- Installed all of them with administrator privileges and all of them went fine but the wireless LAN driver.
- At this point, Device Manager didn't show any device with a "?" so I assumed everything was fine.
- But no, because no wifi interface showed up in the device manager window.
- If i change the position of the wireless physical switch (at the front of my laptop, on my left), the bluetooth device goes off and on in the device manager window. But in no case, any wifi interface appeared / dissappeared.
- I also typed fn+f5 several times to toggle airplane on/off but did not work at all.
- Then I installed Windows 7 driver for the wireless card but didn't work either.
- I revised the BIOS and the wifi interface is activated.
It looks like the wifi component of the wireless card is hidden/undetected to Windows 8 (bluetooth works fine. I assume both wifi+bluetooth belongs to the same card).
View 3 Replies
View Related
Jun 5, 2013
I own an Edge 15, 64 bit processor. It came with 2gb RAM. I recently purchased and installed two 4 gb cards for a total of 8gb RAM. I updated my BIOS. Under "Computer>Properties" it is showing only 4 gb Install RAM. Why is it not reading or the system not using the additional 4 gb of RAM on the second card?
View 3 Replies
View Related
Oct 12, 2014
My ideapad N580 keeps going to limited connectivity. Says I have a Braodcom adapter...
View 9 Replies
View Related
Dec 6, 2014
I'm using a seconday (spare) power adapter at home, for my y50. The adapter is a 20 volt / 90 watt unit. My primary adapter (in work) is the original adapter that came with the Y50, a 20 volt / 120 watt unit. When using the laptop with the spare adapter (the 90 watt unit) I get a Lenovo Energy Manager message that pops up stating "Adapter has limited support" and "Performance will be affected if the power adapter cannot provide enough charge". Presumably the laptop would need more than 90 watts to drive it if the CPU and /or video were working hard? Do you see any issues using that adapter for day to day work, that is, not gaming? Also, can the messge be disabled?
View 3 Replies
View Related
Sep 25, 2014
I have yoga 2 13 model name 20344 and my wifi connection gets limited on random time, I have installed . 2012.4.1022.2013 driver,these are latest available drivers.
View 3 Replies
View Related
Dec 9, 2013
I just got a new Lenovo U430 touch. Major problem: I only get limited wireless. I should note that it hasn't connected wirelessly once. It does connect fine via LAN ( I kept the cables!). I tried calling Lenovo but they said it must be my router and I should contact my internet provider (which I don't understand since the internet provider has nothing to do with the router.)
The laptop does connect wireless for about 5 seconds (I once managed to open an email before the connection slipped). Then it shows the yellow exclamation point in front of the wireless icon on the right-bottom screen. If I troubleshoot, it fixes the default gateway. Repeat. Sometimes it says that the "default gateway is not available."
Things I have tried per other similar questions asked online: unistalled McAfee, including with the removal toolpower cylcing my router, laptop, and cable modemuninstalling the wireless driver and restarting the laptop Some notes: the system came with Windows 8.1I have two other devices wirelessly connected to the same router with no problem. I'm sitting about 8 feet from the router.the only programs I've downloaded are Firefox and then finally Kaspersky (since I uninstalled McAfee) I'm pretty good with computers, but this seems beyond me. It's a new laptop and it should work, darn it!
View 8 Replies
View Related
Mar 11, 2014
I have an Ideapad Y510 that has Vista and I'm having a problem connecting to the internet. I have other computers running in the house (this one I'm now typing on) so my internet is working correctly just not on my laptop. The laptop was working and connecting but something happened and now it says that I have limited access to the internet.
I read that it may not be getting an IP address assigned to it. I called my internet provider and they ran through their troubleshooting steps but figured it was in the computer. I don't know if the driver has been corrupted. I got the software CD that came with it and tried to load it again but it didn't work (not sure if I did it correctly).
View 3 Replies
View Related
Apr 15, 2014
Its been quite a while (3 months ) that ive upgraded my windows 8 to 8.1 . I didn't bother checking it till now that I cannot connect to any ethernet network at all. Ive tried evrything from disabling ipv6, updating network drivers and even resetting the routers like a gazillion times but i've had no such luck in any of the process ive done so far .
View 3 Replies
View Related
May 26, 2013
Lenovo Ideapad z585
AMD A10-4600M APU w/ Radeon HD Graphics @ 2.30 GHz
6 Gb DDR3 RAM
Windows 8 64-bit
Broadcom 802.11n Network Adapter
My network card is on the fritz, to put it simply. I randomly lose internet access, and my network connection is listed as "Limited Access". Sometimes turning off the adapter and turning it back on solves the problem, but sometimes I need to do a full reboot. My system is the only one affected, so I know its not the router. I have already viewed the similar threads and tried the methods advised with no success.
So far I have:
-Updated my drivers
-Disabled Broadcom Bluetooth service at startup
-Disabled Hybrid Sleep
-Told Windows not to shut the network card off.
I did a System Refresh last week and that's when the problem started.
View 9 Replies
View Related
Nov 25, 2013
So I purchased a y510p from a retailer yesterday and was very happy with it. First thing I did was update to Windows 8.1. After updating, I get VERY unreliable, weak wi-fi signals and limited connectivity on all wi-fi connections. My wireless card is Intel Centrino Wireless N-2230.
View 2 Replies
View Related
Mar 21, 2013
I have an ideapad z500 which I'm happy for, but it annoys me that when 'm at my college I can't properly connect to the wi-fi the school has. When I connect, I'm on for usually about half an hour, but then I get the "limited connection" yellow triangle and I have to deactivate the networkcard before I can get a normal connection.
Other times I simply just can't connect, it tries but it fails. When it does, I have to reboot the computer before it succeeds, and that's no good when you are working on a project. At home i have no problems, it works nicely.
Also, how to enable the WiDi on the z500.
My PC is running Win 8 with the Intel Centrino n2230, Intel 3rd. gen i7 (3632qm)
View 9 Replies
View Related
Oct 19, 2007
can M1710 handle SATAII drive? i want to buy SEGATE ST9200420ASG
View 9 Replies
View Related
Aug 30, 2013
I had an extra Lenovo T410 sitting around so I wanted to restore it to its "factory state" by performing a "format boot". Plan was to boot from CD drive and reinstall Windows 7 (32 bit) during the process. However, disaster, after the process finished I am now stuck in some sort of safe mode (everything is larger than usual) and the computer is missing several drivers. I installed the network adapter driver manually (can identify networks but can't connect to internet). Device manager still lists Base System Device, Ethernet Controller, PCI Serial Port, PCI Simple Communications Controller, and Unknown Device drivers to be out of date.
My objectives here are to
1) restore connectivity to internet and
2) get Windows 7 Home Premium to full functionality.
View 8 Replies
View Related
Mar 18, 2010
Does anyone know if the Vostro 1500 supports SATAII? I'm about to buy an SSD for my Vostro but if it doesn't support SATAII then I'm not really going to see a major difference..
I planning on upgrading to a new laptop soon and bring that SSD with it, but wanted to know what I should be expecting out of the 1500..
View 3 Replies
View Related
Jun 16, 2009
For the dv3t or dv4t, the specs list it as SATA compatible. Does this mean I can't pop in a SATAII SSD? [url]
View 3 Replies
View Related
Sep 30, 2009
I'm thinking about changing my HDD, since it's a 4200rpm 200GB.
I was thinking about getting a Samsung SATAII 7200rpm( storage doesn't matter that much, I already own an external device, as long as it's not less than my current HDD ).
But I was told that my Vaio model, VGN FZ140E, doesn't support SATAII. So I'd have to choose a SATA 5400rpm HDD.
I'd like to ask you how can I check it this is true. If so, would changing my HDD be a noticeable upgrade?
Also, among these brands, which one would you choose( for better performance, low noise, low energy comsumption etc. ): Samsung, WD or Seagate?
View 6 Replies
View Related
Jun 3, 2009
I have a HP dv6408nr that needs a hard drive. I have found a Seagate Momentus 7200.4 500GB. I have searched on Google for days and i have yet to find a definitive answer if my computer actually supports the 3GB/s transfer rate that new hdd is capable of. I do know that the drive i have is a 1.5GB/s however i have not checked it for a jumper. The hdd that my lappy shipped with has the 1.5GB/s transfer rate.
View 15 Replies
View Related
Nov 16, 2014
I bought a new Lenovo Z50-70 laptop from [URL]
Following are the laptop configuration: Quick link:
Intel Core i7-4510U 2GHz Processor1TB Hybrid HDD8GB DDR3L 1600 Memory15.6" 1920x1080 LED Glossy WedgeIntel HD Graphics 5000Bluetooth 4.0Intel Dual Band Wireless-AC 3160DVD Recordable (Dual Layer)4-Cell Lithium-Ion BatteryWindows 8.1 (64-Bit)Initial setup went well. After 4 hours or so while surfing webpages, suddenly it started showing no internet connection and asked to reload webpages. So I looked at the wireless network icon on the bottom right corner which showed full bars. A few seconds later a yellow colored triangle with exclamation mark appeared on the network icon showing no internet and limited internet.
After turning the wifi off and back on the internet connects and works for few hours. After few hours, it lost internet connectivity again with the same above symptoms. I have this laptop now for 3 days and in past 3 days I had this problem at least 25 times.
View 7 Replies
View Related
Jun 3, 2011
the way the F keys have been switched on my Edge 14", today I came across some time to fiddle around with it. I googled what I needed to do...and came across this question on yahoo, which is exact what I need. I bought Lenovo Thinkpad Edge several months ago, and I really like it so far. But I use MS Excel a lot and I always use shortcut keys which involve F1~F12. On my thinkpad, I always have to hit "Fn" and "F1~F12" keys simultaneously, and it is a little annoying since I've been used to using F1~F12 keys without hitting "Fn". So I went to BIOS keyboard setting, and enabled the Function key lock. It became a little bit better, because now I don't have to hit "Fn" and F1~F12 simultaneously, but I could press "Fn" AND THEN, F1~F12. But what I really want is the "Fn" key always on without pressing it. On the BIOS screen, it says hitting "fn" key twice keeps "Fn" key always on, but whenever I hit it twice and hit F1~F12, it doesn't function like F1~F12 key, but it just controlls the sound volume or display light. Is there any way to keep "Fn" key always on without pressing it everytime I want to use F1~F12 keys?"
In short, in the BIOS page, once "enabled", you are able to double tap the Fn key and have it stay on without you pressing it each time; however, it doesn't appear to work that way and turns off everytime you use a F key.
View 3 Replies
View Related
Nov 7, 2009
The thing they call "edge to edge glass" which is really just plastic above an ordinary screen. The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
Result? THIS SCREEN IS FANTASTIC. Yeah ok, of course I would say that. But if you knew me, you'd know that was way out of the ordinary and really meant that THIS SCREEN IS FANTASTIC.
One thing you may not have considered is that the screen in its default position has yet another flaw, both sides of that glossy plastic thing are glossy, so some of the light coming from the screen is reflected back to the screen, and as you know light reflected onto the screen has a yellowish tint. That is my guess as to why the whites on this screen are really really white now, and the screen is much brighter. This also explains why other 300nit screens used to look so much brighter than this.
I will have more pics when I am able to charge the battery to my good camera. If anyone has any questions about removing that plastic thing I'll be happy to answer your questions, it's actually pretty easy. For those interested, here is how I did it:
1. I removed the "star" head screws, this was accomplished not with a special star head screw driver, but an ordinary flat head precision screw driver.
2. Put some paper over a hacksaw blade to avoid scratching, wedged it under the plastic near the top where the camera is, and snapped out the first of the several lock-in points on along the top edge. I proceeded to detatch the rest of the top of the screen in this way.
3. Both the left and right sides were held on mostly by adhesive, the very edge point locks in slightly, but the efforts removing these sides are focused mainly on separating the adhesive bond.
4. I pulled upward on the plastic and it came right off, there seems to be no adhesive or lock-in points on the bottom side.
5. Using the center of the screen as a test area, I tested several cutting utilities and decided on the utility knife. To my surprise, the plastic was about 1mm thick.
6. I clamped the screen down to the table, with a straight edge positioned 1mm inward of the black line, to give headroom for errors.
7. I cut along these lines, and repeated step 6 for each side, and pushed out the center to reveal the border piece that now resembled a common laptop screen enclosure border.
8. I used a medium grit sand paper to bring the cut lines to meet the black lines, and finished it off with a fine grit sand paper.
9. I applied some electrical tape to the area between the edge of the screen itself, and the edge of the laptop on the right and left sides because there was light leakage, and then popped the border back on and screwed it down.
Found the charger! Here's the high res shots. They do *some* justice to the screen quality.
View 10 Replies
View Related
Aug 4, 2009
How does this screen do for viewing blu-ray movies? I know that everyone is raving about the RGBLED, but if this option is still good, then I'll go with it, because it's about $250 cheaper...
View 9 Replies
View Related
Nov 7, 2009
I went insane and cut along the black-to-clear border of the m1340 screen thing. The thing they call "edge to edge glass" which is really just plastic above an ordinary screen.
The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
View 5 Replies
View Related
Aug 14, 2009
[url]
Heres a video I made to demonstrate the ammount of flex on the edge to edge lid. It does have flex and bend, but its not as bad as the one j3n82 reported. I recorded with an iPhone so the video quality is crap. Also forgot I had left it in portrait mode when I recorded it (I didn't have a tripod so I used a cup lol). But I hope it gives some of you a basic idea of the quality. I thought openning the blinds to allow the vertical lines will show the bend/flex a lot more. I was applying quite a bit of pressure, although it doesn't seem like I was in the video. I felt as if any harder I might have damage something, or maybe pop the edge to edge screen out. I used an 8lb dumbell, I think thats the limit.
If you noticed the cloth I used to cover the keyboard when I closed the screen, I did this this to avoid getting the smudges on the screen when I pushed the lid down onto the keyboard.
At the end of the video I tried showing the Edge to Edge display, notice how theres another layer of screen over the bezel. Thats the difference between the edge to edge.
View 10 Replies
View Related
Nov 20, 2012
I just bought an Edge 130 and wanted to set it up today. But I just can't enter the BIOS! I keep pressing F1 during the Lenovo splash screen. I've pressed it repeatedly, held it down, I even tried it with the Fn button pressed. Nothing worked.
I've have been working with and professionally supporting Lenovo (and before IBM) notebooks for over 10 years and not once did I have such a problem. This is only the second E-series notebook I have ever had. I bought myself an E525 last summer and had no such problems and at work we have T-, X- and W-series.
View 7 Replies
View Related
Aug 13, 2012
ThinkPad Edge, Win 7 Sp1. For the last month I have had a problem with the control key always down. Programs react as if the control key were pressed. MS Word 7 gives an error message that the control key is down and asks if I want to go to Safe Mode. I have had the keyboard replaced with no change. The computer has been thoroughly checked, all drivers, patches, software upgrades have been made by my Tech, and the Bios has been flashed.
Last week, I found a post on Google for Win XP where the poster had the same problems. The fix was to ensure that the Sticky Keys were turned off in Ease of Access on the Control Panel. I went to Ease of Access and turned off all of the selections, and the fix seemed to work. However, yesterday the problem reoccurred. I don't know if it is a problem with the motherboard, hardware, or with Windows. It appears that this problem affects more than one version of Windows.
View 9 Replies
View Related
