Lenovo P/Y/Z Series :: Y50 Adapter Has Limited Support Message
Dec 6, 2014
I'm using a seconday (spare) power adapter at home, for my y50. The adapter is a 20 volt / 90 watt unit. My primary adapter (in work) is the original adapter that came with the Y50, a 20 volt / 120 watt unit. When using the laptop with the spare adapter (the 90 watt unit) I get a Lenovo Energy Manager message that pops up stating "Adapter has limited support" and "Performance will be affected if the power adapter cannot provide enough charge". Presumably the laptop would need more than 90 watts to drive it if the CPU and /or video were working hard? Do you see any issues using that adapter for day to day work, that is, not gaming? Also, can the messge be disabled?
I just got a new Lenovo U430 touch. Major problem: I only get limited wireless. I should note that it hasn't connected wirelessly once. It does connect fine via LAN ( I kept the cables!). I tried calling Lenovo but they said it must be my router and I should contact my internet provider (which I don't understand since the internet provider has nothing to do with the router.)
The laptop does connect wireless for about 5 seconds (I once managed to open an email before the connection slipped). Then it shows the yellow exclamation point in front of the wireless icon on the right-bottom screen. If I troubleshoot, it fixes the default gateway. Repeat. Sometimes it says that the "default gateway is not available."
Things I have tried per other similar questions asked online: unistalled McAfee, including with the removal toolpower cylcing my router, laptop, and cable modemuninstalling the wireless driver and restarting the laptop Some notes: the system came with Windows 8.1I have two other devices wirelessly connected to the same router with no problem. I'm sitting about 8 feet from the router.the only programs I've downloaded are Firefox and then finally Kaspersky (since I uninstalled McAfee) I'm pretty good with computers, but this seems beyond me. It's a new laptop and it should work, darn it!
I have an Ideapad Y510 that has Vista and I'm having a problem connecting to the internet. I have other computers running in the house (this one I'm now typing on) so my internet is working correctly just not on my laptop. The laptop was working and connecting but something happened and now it says that I have limited access to the internet.
I read that it may not be getting an IP address assigned to it. I called my internet provider and they ran through their troubleshooting steps but figured it was in the computer. I don't know if the driver has been corrupted. I got the software CD that came with it and tried to load it again but it didn't work (not sure if I did it correctly).
The most glaring omission for OpenCL is for desktops with ATI GPUs, namely the HD 2400XT, HD 2600Pro, HD2600XT, and HD3870. Now it's not like these GPUs can't support GPGPU operation since they already do so in Windows under ATI's own CTM and Brook+ language.
ATI's OpenCL drivers for Windows should be available soon, they were promised for H1, and if it turns out the HD2xxx and HD3xxx series is capable of supporting OpenCL but only in Windows and not OS X it'd be very disappointing. Somehow I don't think Apple envisions iMac users having to use Boot Camp to use OpenCL accelerated apps.............
Its been quite a while (3 months ) that ive upgraded my windows 8 to 8.1 . I didn't bother checking it till now that I cannot connect to any ethernet network at all. Ive tried evrything from disabling ipv6, updating network drivers and even resetting the routers like a gazillion times but i've had no such luck in any of the process ive done so far .
My network card is on the fritz, to put it simply. I randomly lose internet access, and my network connection is listed as "Limited Access". Sometimes turning off the adapter and turning it back on solves the problem, but sometimes I need to do a full reboot. My system is the only one affected, so I know its not the router. I have already viewed the similar threads and tried the methods advised with no success.
So far I have: -Updated my drivers -Disabled Broadcom Bluetooth service at startup -Disabled Hybrid Sleep -Told Windows not to shut the network card off.
I did a System Refresh last week and that's when the problem started.
So I purchased a y510p from a retailer yesterday and was very happy with it. First thing I did was update to Windows 8.1. After updating, I get VERY unreliable, weak wi-fi signals and limited connectivity on all wi-fi connections. My wireless card is Intel Centrino Wireless N-2230.
I have an ideapad z500 which I'm happy for, but it annoys me that when 'm at my college I can't properly connect to the wi-fi the school has. When I connect, I'm on for usually about half an hour, but then I get the "limited connection" yellow triangle and I have to deactivate the networkcard before I can get a normal connection.
Other times I simply just can't connect, it tries but it fails. When it does, I have to reboot the computer before it succeeds, and that's no good when you are working on a project. At home i have no problems, it works nicely.
Also, how to enable the WiDi on the z500.
My PC is running Win 8 with the Intel Centrino n2230, Intel 3rd. gen i7 (3632qm)
I bought this Z710 new but I get a message saying "The battery is unauthorized". Also the battery indicator stays at "0% available (plugged in, not charging)." If I unplug the power cord, the laptop powers off cold. It has always been this way. This is a problem for me because I want to upgrade my BIOS but I can't because I get an error stating "Battry is too low (0 < 30 ). Please charge your battery to 30%." when I try.
How do I get this laptop to start interacting with its battery? I have already tried taking it out and putting it in again and rebooting.
I had brought a new G500 Lap it was nice to work with it, but fo past two days when i connected it with charger it shows me "Plugged In, not charging". what to di with it but some times to get charging .
I bought a Lenovo Y510P 4 days ago. The laptop is amazing and i love it execpt for one proble,... while playing games i get a message about every 5 minutes saying that my ram is full and to exit out of the game
i have my virtual memory setting set to No page file for both of the things that i could change the setting to (there were only two different things in the virtual memory options which where Windows 8 and (lenovo)).
what should i set windows 8 and Lenovos virutal memory usage to? i thought i was suppost to select no page file but that has not worked.
i have 8gb of ram and while gaming 60 percent of it is being used so i know its not full
I have the lenovo ideapad G510 and i get an error message when i trying to backup my system. the message is "current system can not support backup". why it doesn't work?
I am having a message that says "Genuine Lenovo Battery Not Attached" message that appears after Windows 8.1 starts up. A similar sort of message appears before even Windows boots up, and I need to press the 'Esc' key in order for Windows to boot. This seems to have happened after a recent Windows update. I have uninstalled an reinstalled the Lenovo Power Management Driver but it does not appear to have fixed the issue. My BIOS is the latest version.
I have 12 updates showing as needing to be installed in my windows update to go onto my new lenovo G500 but every time I try and install them I get the error message 80242006. I have googled it and tried the suggestions with no luck although I have yet to spot one that is for windows 8.1 which I have upgraded this laptop to.
The missing updates are KB's 2987107 ,2968296, 2972103, 2979573, 2978041, 2979576, 2977292, 3000061, 3000869, 2989542, 2998174 and 3000988.
Could the problem be because I have upgraded the laptop to windows 8.1 from 8?
I have a Lenovo ThinkPad W540 running Windows 8 (64 bit) connected to a ThinkPad Pro docking station and hooked up to a 24" widescreen monitor.
All was working perfectly for the past couple of days (since I got it) until today when the monitor will go blank, display a 'no signal' message, the laptop screen will flicker then after approx 15 seconds all is back to normal excepting the following message is displayed:-
I've tried clicking Yes and No with no permanent lasting improvement!!
Following are the laptop configuration: Quick link:
Intel Core i7-4510U 2GHz Processor1TB Hybrid HDD8GB DDR3L 1600 Memory15.6" 1920x1080 LED Glossy WedgeIntel HD Graphics 5000Bluetooth 4.0Intel Dual Band Wireless-AC 3160DVD Recordable (Dual Layer)4-Cell Lithium-Ion BatteryWindows 8.1 (64-Bit)Initial setup went well. After 4 hours or so while surfing webpages, suddenly it started showing no internet connection and asked to reload webpages. So I looked at the wireless network icon on the bottom right corner which showed full bars. A few seconds later a yellow colored triangle with exclamation mark appeared on the network icon showing no internet and limited internet.
After turning the wifi off and back on the internet connects and works for few hours. After few hours, it lost internet connectivity again with the same above symptoms. I have this laptop now for 3 days and in past 3 days I had this problem at least 25 times.
Thinking of buying a S410P i7 - but the whole series only offers 4GB RAM in one slot - so does the S410P support more RAM, if I switch it to 8GB for example?
just got a Z40-70 59436180 w/ nvidia geforce and installed it with windows 7 (32 bit),the nvidia vga driver setup told me that i have to install intel vga driver first before installing the nvidia one..
the problem is i can't install the intel vga driver which i got from the lenovo download support page (the filename is "ivg200w732.exe"),when i run it, it says something like my computer doesn't have the minimum requirements for the driver to install..well it looks like it is the wrong driver, because when i explore the installation directory, i found a "x64"-named directory... and no "x86" or "32bit" or anything similar...
I can extend my W530 Win8.1 display to a Dell monitor via HDMI OR a HP monitor via VGA but not both simultaneously. If I plug in both monitors simultaneously, then the HP goes to sleep and the Dell reproduces the laptop display, with no option to extend.
Is the w530 capable of extending to two monitors? If yes, do I need to get different cables or something?
I've run my Lenovo laptops (on a T510 now) for years using the middle button (the "scroll" button) as a plain old middle mouse button. The ultranav tool has always had an option to make it act like a MMB, with no fancy scroll function, etc.
I just bought a new W540, and found, much to my distress, that such an option doesn't seem to exist on the W540! This is very important to me as I run Cygwin X server and rely on the middle mouse button to to paste in Xterms and other X apps. This is a real showstopper for me!
I noticed a "three finger tap" function that's supposed to act as a MMB. But it doesn't seem to work in Cygwin X. Plus, it's not the best solution.
Is there any way to do this with the new Ultranav drivers?
So my power cord or battery is garfunkled and it doesn't hold a charge. I use my laptop (Dell Inspiron 1501) with the cable plugged in all the time. I'm perfectly happy with this and there is absolutely no way I'm paying any more for any charging equipment (battery or otherwise) when I can get a faster laptop for cheaper than the cost of the charging equipment. So I'm not going to spend any more money and I'm perfectly happy with how the laptop works.
I don't need a solution but when the laptop boots it stops at this error message (in the BIOS or DOS or w/e before the OS loads) until it gets some user input okaying it to continue booting.
I want to disable the message to allow the computer to boot into the OS when it is turned on. I either want the message to time out or not to appear at all. I looked in the BIOS (which is the simplest BIOS I've ever seen and has practically no options outside of boot protocol) and didn't see any options related to error messages or to act in any way.
I have an AC adapter left over from my first generation X1 Carbon. It is 90W/20V. The adapter that came with the new machine is quite a bit smaller, and only 65W/20V. Can I use the 90 watt adapter with the new model X1, or will it damage it somehow? Dont want to ruin my brand new computer.