Lenovo G580 B / G Series :: Brightness Controls Not Working
Aug 27, 2012
I just bought my laptop. Installed Windows 7 clean 64bit on it.This is the laptop's product page. I can't change the brightness of my laptop's screen. I can't do via the [Fn+Up/Down] combo nor by the Windows Power Options interface.
I tried all combos of installing and uninstalling the Lenovo Energy Management. (I got v7.0.4.1 on my laptop).I tried un and installing Intel HD 4000 (Driver v8.15.10.2696). I get Lenovo ACPIVPC v7.1.0.1 (12/15/2011) when installing the energy management thing.I've tried to install as least as possible other Lenovo crapware.
I have a thinkpad l520 5016-c74 running windows 7 64bit and kubuntu 13.04.
When i try to adlust the brightness in kubuntu, the jotkeys work just fine.
On the other hand, in windows, i can adjust the brightness from the windows menu, but every time i hit Fn+home or delete (this is the hotkey on my machine) the brightness, regardless of where it is set, drops to 7 (from a scale of 1-15), and cannot be readjusted, If i hit again Fn+Home or Delete, it does this flash, like it's trying to change the brightness, but something holds it in 7. I can always change it from the windows menu. But again the same thing, hotkey and back to 7.
My speakers stopped working. I dont know what to do. When i plug headphones into my laptop i get sound but other than that i get no sound from my computer
After entering the initial request for password (successfully), the keyboard is non-functional. With the exception of the windows scroll key, no other keys work. Logic suggests that this is a driver problem. The question is which driver?
BTW, looking at the driver manager, it says that the keyboard driver is a standard PS2 keyboard from Microsoft, dated 6/21/2006, version 6.2.9200.16548. Can this be?
I've recently installed Windows 7 x64 build 7229 on my Vaio and I've managed to get everything working except for the screen brightness controls.
So far I've installed the x64 version of SFEP driver along with Vista versions of Sony utilities dll, sony shared library, sony event service and sony settings utility.
Installing the xp versions of those programs made the brightness control work fine, but on Windows 7, the screen brightness control pops up on the screen but the brightness doesn't change. Also I've read that I should be able to control the brightness in the Windows mobility manager, but there is nothing there about screen brightness.
The screen running at full brightness is hurting my eyes.
The brightness control keys (f2 & f3) on my pavilion dm4 stopped working all of a sudden. I'm operating windows 7 64bit. I've tried reverting to previous system restore points. I've also installed the BIOS, Intel chipset, and graphics drivers. All the other function keys are working properly, just can't change the brightness. Right now it's stuck on the brightest setting. I'm getting terrible eye strain from the screen.
I have a W500, ATI Mobility FireGL V5700, Windows 7.
When I press FN+Home and FN+END to regulate brightness up or down, the brightness symbols turn on and goes up/down, but the screen brightness is not regulated up or down but stays constant somewhere in between.
What can I do to get "brighness" working?
It has never worked, the computer is 2 months old. I have upgraded from Windows 7, 32 bit to 64, but brightness is still not working.
I will keep this short, I have a Lenovo ideapad y510p with Windows 8.1 (I got it with 8.1, did not upgrade from 8) . I noticed a problem yesterday, where I cannot adjust the screen brightness. If I use the keyboard commands (Fn + Up and Fn + Down) The slider appears on the top left of the screen, as always, but does not “slide” It stays static.
If I move the slider on the Setting menu, I can slide the value but the brightness does not change and the value is not reflected on the slider on the top left of the screen.
I am not sure when this happened for the first time.
I just got the x120e and I already went through and fixed it auto-brightening itself. After I hit the Fn + Home and adjusted it to my preference. It was not on the charger when I did that and I was in a darker room so I had the brightness down lower. Later on in the day, I plugged it in to charge and I went to make it brighter. The brightness is not changing however. All the oher Fn + F keys are working. Just not the two for brightness. The weird thing is, I shut the computer, waited for it to enter sleep mode then opened it up again and it was really bright and I had to pretty much squint, but again the keys were not working to lower it. I closed it again and opened it and it is again dimmer. The keys still aren't working.
Why neither the display brightness slider nor the F8/F8 brightness function keys cause any change to the display brightness? It used to work but for the past few weeks it's not. I thought that slider was able to override any preset power settings.
I own an Ideapad Z-500 notebook running Win 8.1.After updating Intel graphic adapter from Windows Update the screen brightness adjust key (F11 and F12) stops working and I cannot adjust my scrren brightness.I have to uninstall it and disable Windows update to keep using my laptop.
Having a hard time figuring the partitions. first is a windows recovery drive. Second the windows boot partition. Third i'm guessing a lenovo recovery drive. Other than C: Windows, The other i'm not sure.
Other info: Made usb factory restore and made one restore point. When i made the usb factory restore when it finished it asked if i wanted to erase the recovery and i selected yes. Was thinking maybe G: was created when i made the restore.
i've got a Lenovo G580 which I've had a for a little while now. It was working OK on Saturday but I tried it this morning but it wont turn on. I've tried a different power supply and I've tried it with and without the battery. When I plug the charger in the the batter light comes on but when I press the power button nothing happens.
I've got 2 separate but really annoying issues with my W540 20BH:
- display brightness keys not working: when waking up from Hibernation mode, sometimer (really, randomly!) the display brightness keys (Fn+F5/F6) don't work.... either if the display brightness is stuck on max, min or an intermediate level...Is there a way to shut down and restart the process which commands the Fn keys?
- audio channel commutation gets stuck. Normal behaviour of the audio configuration is: 1) speaker volume disabled, mic disabled 2) when plugging in a 4-pin headset, headset's volume is on, headset's mic is switched on; speaker volume is still disables. 3) when unplugging the headset, speakers' volume is still 0
After each boot, the audio channel is at 0, but doesn't commute to the headset when plugged in! I have to open Configuration Panel, realtek properties. With this window open, unplug and re-plug the headset. Now, the volume has its normal behaviour.
Any better way to configure audio channels and evenments, which is able to bypass realtek's manager?
When I watch a video or just open different windows on my laptop, the brightness changes.For example, if my desktop picture is dark and I close a white window, then in a few seconds my desktop becomes brighter. If my desktop picture is white and the window I close is also white, nothing happens.
Basically it won't shut down or reboot nicely anymore.
I noticed it today when I decided to do a clean install of Windows 8.1. It freezes on the last part of the install (where it reboots) - I manually cut the power by holding the power button. Turn it back on and it and it loads up Windows as usual.
But then when I try to shut it down or reboot from within Windows, the laptop just seems to stall at some point and never finish - Literally forcing me to manually power it down whenever I'm done with it.
I have a small issue with my Lenovo G580 (20150). I have Windows 8.1 and i have noticed that my 4GB of RAM DDR3 run at 800mhz. I have searched for everything, even swapped the RAM but there is no change in the frequency, it simply runs on 800mhz. I have tried to update the BIOS from 5ECN39WW (v 3.05) to 5ECN96WW, but whenever i try to do that it comes back with the error message "DC detect error!".
I have a lenovo G580(20157) which has a BCM4313 wireless chipset which supports both WiFi as well as Bluetooth, (citation here: Broadcom Chipsets)...
However I can't use the Bluetooth capability of my chipset..I tried downloading drivers from the Lenovo website(Drivers Main Page), but it would say no driver found at the end of the installation!! Also I downloaded Lenovo Energy Managment, and it only shows Wifi.I also tried downloading Broadcom Bluetooth Solution but itis stuck at detetcting device.I have a new windows 7 installation..
My friend has a Lenova G580. She said Windows wouldn't boot and gave it to me to fix.
I confirmed that windows does not boot in normal mode, safe mode, or recovery mode using any of the boot options for Windows. It will either sit at a black screen (it looks like it's almost at the GUI) or reboot if in safe mode before it gets to that point.
So after discussion we decided to whipe the machine using the Lenovo OneKey Rescue system. I hit the Lenovo OneKey button next to the power button.
It spends a couple minutes booting and I get the green grass background that looks like this one for version 7 but it will just sit there for a day without ever loading the the app. No mouse, no windows. Just the brackground image.
What the problem might be for this system? Restoring to factory settings was the last resort and I am alarmed to see this is not working on this ~2 year old system.
I've a Lenovo G580 Laptop (2nd Gen PDC B960, 2 GB, 500 GB, DOS) When I bought it came pre-installed DOS, and then I install Windows 7 ultimate (32-bit, i didn't know at that time, 2nd gen PDC are 64-bit). My friend recommend me to disable UEFI from boot setup before installing any non-genuine OS, so I did disable that. My laptop is working fine, but all of a sudden it started to do random mouse freezes, surprisingly pressing ALT+F4 works like a charm to make mouse work again (by mouse I mean pointer actually,I think may be it's because any virus/malware or whatever that was, and also I was planning to change my OS to Windows 8 (it's after 10-11 month of purchase date), so I decided to format anyway, instead messing up with mouse freeze problem.
I'm not able to start my BIOS setup, nor able to use quick boot option (to select various bootable device option from list)
I try to press recovery key (small button near power button), that open recovery module properly (no glitch/error).but unfortunately I don't have any backup made previously so no use of recovery module.
and then I restart my laptop, then I press F2, it shows the first screen of BIOS menu, but my system stuck there (unresponsive state), i've no option else directly turning it off by holding power key for few seconds,..
and then no boot menu F2, F12 still unresponsive.
means whenever i open recovery module it able to open F2 menu (not F12) but that stuck too.else it just completely ignore F2, F12 I'm not a computer noob (not flaunting), but I spend last 4-5 hours looking for a solution for it, but couldn't find any solution by myself.
although my laptop is not in not working state. somehow I manage to install windows 8, but it's really weird that I can not access BIOS menu, my laptop is no longer in warranty period so I can experiment with it any way I want.
I am facing this problem for last few days with my ~3 months old Lenovo G580 laptop.
One morning, i switched on my laptop and found the battery indicator showing "88% available (plugged in, not charging)". and when i removed the power adapter, the laptop would just power off.
in short, the battery is getting detected but is not charging or working anymore.
At first i thought it was some software/driver problem but then, i checked the Lenovo "Energy Management" tool and found that it was showing the battery status "Destroyed" (Screenshot below.)
Link to image
My system details: Lenovo G580, Core i5 3rd Gen, 4gb DDR3 RAM and 500GB HDD OS: Windows 8 64bit
I've bought Lenovo M490s notebook one week ago without OS. I've installed Windows 7 Professional x64 retail.First of all I could not find software that controls Function keys. After installing every driver and software from support page (M490s) my function keys just doesnt work except Fn+F1 sleep, Fn+F2 turn off the screen, Fn+F6 disable touchpad and play buttons. Also no information was displaying on the screen after pressing such buttons - no volume and brightness level.
After doing some research I've found and installed Hotkey Features Integration from Lenovo M490 (without S) support page. Every function key is started to work, information on the screen also begin to display (volume and brightness level).Now I spotted a huge problem, after 3 or 4 hibernation volume and brightness keys (fn+up,down,left,right) just stopping to work!!! Fn+F1-F12 combinations are working normal. Then after reboot brightness and volume keys are working again!!
I recently replaced the inverter in my Dell Xps M1530 laptop. I bought the inverter off ebay, and the listing said it was compatible for my laptop. My problem is,
that since I replaced the inverter (screen looks great by the way), the brightness controls no longer do anything. The laptop is on constant highest brightness. If I use the Fn Up and Down arrows,
the brightness bar comes up on the bottom right of the screen and it actually moves left and right in line with what I am telling it to do, but the screen brightness doesn't change! I have tried going in to the power settings and display settings
I upgraded from Vista to Windows 7 on my SZ5. Was surprised at how much works out of the box (fingerprint sensor, drivers etc) but the one glaring bug I found is that when I close the lid and the monitor shuts off, when I reopen it the brightness controls (FN+F5 and FN+F6) no longer work.
I also notice that the brightness controls in Windows' power options Control Panel disappears.
I need to restart my computer to resolve this (similar problems by other users: Sony Vaio SZ1XP - Windows 7 RC ). Does anyone have a solution? Thanks!
I have bought Lenovo Essential G580 (59-324061) Laptop (3rd Gen Ci5/ 4GB/ 500GB/ DOS) on Feb 2013, its out of warranty now.
I have installed Ubuntu in the laptop, not sure how i formatted the hard disk during installation. I guess it was full format of hard disk during installation (while selecting hard disk).
Till today everything was working fine. From today morning, there is always a Boot menu which is being displayed with following options:
I have pressed enter in both Ubuntu and ATA HDD options. But after a brief duration the control comes back to the same menu I have specified before. How to boot to ubuntu.
My wife just updated her G580 with the Windows 8.1 update. Afterwards, the keyboard does not function - no keys respond when trying to sign into the computer, the touch pad does not work (USB mouse does), even the Onekey Rescue System button does not work. The only thing that seems to work is the power button.
I restarted the computer and held down the F2 key and was able to get into the Setup Utility where the keys did function (arrow keys, F1, F2, esc, enter). I didn't see anything obvious to me that might work. Exiting the utility and back at the sign on screen the keys don't function again.
what might be the cause or a way to recover the keyboard?
The first black screen with the Microsoft logo loads but afterwards I just get stuck in a black screen with the cursor which I can move around but nothing more.
So, my solution was to get into Safe Mode. Unfortunately although I don't have a password when Win7 boot, I'm asked for one in Safe Mode. The thing is neither the keyboard, nor the touchpad work so I cannot get past the login screen.
The keyboard works perfectly in BIOS, but not in the Windows login screen for Safe Mode.
