I purchased my new Lenovo G580 less than 1 year ago and over this time it has got slower and slower and seems to picked up a number of viruses. I am no expert so took it into our IT guy at work and he has reccomended a factory reset.
I dont think i received a disc with my laptop, how i should go about completing a factory reset and if windows will be automatically installed.
I have a Lenovo Thinkpad X40 - 2371 that I would like to reset to its original Factory Settings. It does not have a CD-ROM drive so I can not use a Recovery CD. Its operating system is Windows XP Professional. I have tried to use the "Access IBM" and the "F11" buttons to see if I can find any Factory Restore option, but there is none.
View 4 Replies View RelatedAfter entering the initial request for password (successfully), the keyboard is non-functional. With the exception of the windows scroll key, no other keys work. Logic suggests that this is a driver problem. The question is which driver?
BTW, looking at the driver manager, it says that the keyboard driver is a standard PS2 keyboard from Microsoft, dated 6/21/2006, version 6.2.9200.16548. Can this be?
My wife just updated her G580 with the Windows 8.1 update. Afterwards, the keyboard does not function - no keys respond when trying to sign into the computer, the touch pad does not work (USB mouse does), even the Onekey Rescue System button does not work. The only thing that seems to work is the power button.
I restarted the computer and held down the F2 key and was able to get into the Setup Utility where the keys did function (arrow keys, F1, F2, esc, enter). I didn't see anything obvious to me that might work. Exiting the utility and back at the sign on screen the keys don't function again.
what might be the cause or a way to recover the keyboard?
My G580 suddenly stopped booting into Windows.
The first black screen with the Microsoft logo loads but afterwards I just get stuck in a black screen with the cursor which I can move around but nothing more.
So, my solution was to get into Safe Mode. Unfortunately although I don't have a password when Win7 boot, I'm asked for one in Safe Mode. The thing is neither the keyboard, nor the touchpad work so I cannot get past the login screen.
The keyboard works perfectly in BIOS, but not in the Windows login screen for Safe Mode.
The Windows startup music doesn't play on my laptop G580 (my OS is Windows 8.1). It only plays when I reboot my machine.
What's the problem? I enabled the startup music (put a tick).
I have always been able to view large icons in my folders in windows file explorer. Then one day I couldnt. I have to right click and choose 'preview' to see the image. How do I fix that ?
View 3 Replies View RelatedMy x220 is driving me crazy these days. Some days ago I experienced very strange behavior of my system. I was just using the notebook as always as it started to stutter.
With stuttering I mean everything is working for 1-2 seconds then is stuck for 1-2 seconds, working, stuck, working so on so forth.
With everything I mean the mouse movement, hard disk load, graphics movement, audio, everything simultaneously. This problem does show up not only if Windows is up but also when Windows is booting or if I start a live linux distribution.
I also noticed that sometimes when I'm moving around the ultranav trackpoint the cursor jumps to one display edge and opens a context window as if I had pressed the right mouse button.
What I did so far:
Reboot my system several times.
Checked Task-Manager: nothing out of the ordinary
Reset BIOS to factory settings
Updated everything to newest stuff
Started a live Linux distribution instead of Windows 7
Decrypted my system (TrueCrypt)
Deactivated Power Management/SpeedStep via BIOS settings
Switched to Single-Core processing via BIOS settings
Swapping RAM from 2x8GB CORSAIR to 2x4GB KINGSTON
Swapped SSD with original HDD
Try booting windows in safe mode
I'm almost at a point to say this can't be a software issue and that it is something mainboard/CPU/GPU related, but I want to be certain before contacting the support.
Another thing I noticed: The stuttering starts exactly when the windows logo shows up and the screen automatically dimmes itself while starting windows. Something is happening in that moment. I may need to add that I did not install anything prior to the current situation. That does support the hardware relation.
Lenovo X220 (Model: 4290-G51) | Intel Core i7 2460M | Intel HD 3000 | 2 x 8 GB CORSAIR DDR3-1333 RAM | 256GB SAMSUNG 840 Basic SSD | 9-Cell orig. Lenovo Battery 29++ (FRU: 42T4942, LGC) | BIOS V1.29 | Power Manager V6.65.1 | Power Management Driver V1.67.04.05 | Windows 7 Professional 64Bit (up-to-date)
I just got it about 2 weeks ago and it's all booger up. I think I accidentally installed some malware and it now there's stuff I just can't get off it. I've been running windows 7 for years and never had malware issues like I'm running into on 8....
Since there's no DVD drive and it didn't come with a system restore thumb drive like my mac air did, how do you do a full factory reset?
I have a G710 (about a year old). I had some Windows problems recently and luckily managed to sort these out but I have recently discovered that my CD/DVD drive is not recognised by various programs. I have run Lenovo solution centre and that points me towards Windows Device Manager. That says that 'Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)'. am not confident with this sort of thing but I really need to get this working.
View 2 Replies View RelatedI purchased a Lenovo G500 and I am wandering why do they not package a CD/DVD for the Windows 8 OS. I am thinking on downgrade it to Win7, but I am finding problems with GPT partitions.
I could erase all partitions and reformat it, but then I would loose the recovery partition and all possibility of reinstall Win8.
How could I extract this Win8 and get it into a DVD? [URL]
I don't have the recovery partition on my system anymore, but would like to reset my Ideapad Yoga 13 to factory status. Is this possible somehow? All the guides I've seen assumed that my recovery partition was still intact.
View 2 Replies View RelatedHaving a hard time figuring the partitions. first is a windows recovery drive. Second the windows boot partition. Third i'm guessing a lenovo recovery drive. Other than C: Windows, The other i'm not sure.
Other info: Made usb factory restore and made one restore point. When i made the usb factory restore when it finished it asked if i wanted to erase the recovery and i selected yes. Was thinking maybe G: was created when i made the restore.
i've got a Lenovo G580 which I've had a for a little while now. It was working OK on Saturday but I tried it this morning but it wont turn on. I've tried a different power supply and I've tried it with and without the battery. When I plug the charger in the the batter light comes on but when I press the power button nothing happens.
View 1 Replies View RelatedI just opened my Ideapad u430, and immediately noticed that the windows OS was installed on the 500gb sata drive instead of the SSD. I'm pretty sure the whole point of the SSD portion was to install the OS on it to speed performance. Any tips on how to transfer the OS onto the other side of the partition without having the original discs?
View 4 Replies View RelatedWhen I watch a video or just open different windows on my laptop, the brightness changes.For example, if my desktop picture is dark and I close a white window, then in a few seconds my desktop becomes brighter. If my desktop picture is white and the window I close is also white, nothing happens.
View 3 Replies View RelatedMy speakers stopped working. I dont know what to do. When i plug headphones into my laptop i get sound but other than that i get no sound from my computer
View 4 Replies View RelatedMy B570 seems to have developed an odd issue.
Basically it won't shut down or reboot nicely anymore.
I noticed it today when I decided to do a clean install of Windows 8.1. It freezes on the last part of the install (where it reboots) - I manually cut the power by holding the power button. Turn it back on and it and it loads up Windows as usual.
But then when I try to shut it down or reboot from within Windows, the laptop just seems to stall at some point and never finish - Literally forcing me to manually power it down whenever I'm done with it.
I have a small issue with my Lenovo G580 (20150). I have Windows 8.1 and i have noticed that my 4GB of RAM DDR3 run at 800mhz. I have searched for everything, even swapped the RAM but there is no change in the frequency, it simply runs on 800mhz. I have tried to update the BIOS from 5ECN39WW (v 3.05) to 5ECN96WW, but whenever i try to do that it comes back with the error message "DC detect error!".
View 3 Replies View RelatedA friend of mine just bought a Lenovo G580 (2189), It's currenlty running Windows 7 x64.
But I can't get the 2 USB 3.0 ports working. If I plug in a keyboard I get no power to the keyboard.
I have 2 unknown devices in Device Manager. I have installed all drivers matching my system.
Proud user of Lenovo T510.
I have a lenovo G580(20157) which has a BCM4313 wireless chipset which supports both WiFi as well as Bluetooth, (citation here: Broadcom Chipsets)...
However I can't use the Bluetooth capability of my chipset..I tried downloading drivers from the Lenovo website(Drivers Main Page), but it would say no driver found at the end of the installation!! Also I downloaded Lenovo Energy Managment, and it only shows Wifi.I also tried downloading Broadcom Bluetooth Solution but itis stuck at detetcting device.I have a new windows 7 installation..
I just bought my laptop. Installed Windows 7 clean 64bit on it.This is the laptop's product page. I can't change the brightness of my laptop's screen. I can't do via the [Fn+Up/Down] combo nor by the Windows Power Options interface.
I tried all combos of installing and uninstalling the Lenovo Energy Management. (I got v7.0.4.1 on my laptop).I tried un and installing Intel HD 4000 (Driver v8.15.10.2696). I get Lenovo ACPIVPC v7.1.0.1 (12/15/2011) when installing the energy management thing.I've tried to install as least as possible other Lenovo crapware.
i set Bios Password on my G580 Laptop now i forget it, i try even to remove Cmos Battery but it doesnt Work.
View 3 Replies View RelatedMy friend has a Lenova G580. She said Windows wouldn't boot and gave it to me to fix.
I confirmed that windows does not boot in normal mode, safe mode, or recovery mode using any of the boot options for Windows. It will either sit at a black screen (it looks like it's almost at the GUI) or reboot if in safe mode before it gets to that point.
So after discussion we decided to whipe the machine using the Lenovo OneKey Rescue system. I hit the Lenovo OneKey button next to the power button.
It spends a couple minutes booting and I get the green grass background that looks like this one for version 7 but it will just sit there for a day without ever loading the the app. No mouse, no windows. Just the brackground image.
What the problem might be for this system? Restoring to factory settings was the last resort and I am alarmed to see this is not working on this ~2 year old system.
I've a Lenovo G580 Laptop (2nd Gen PDC B960, 2 GB, 500 GB, DOS) When I bought it came pre-installed DOS, and then I install Windows 7 ultimate (32-bit, i didn't know at that time, 2nd gen PDC are 64-bit). My friend recommend me to disable UEFI from boot setup before installing any non-genuine OS, so I did disable that. My laptop is working fine, but all of a sudden it started to do random mouse freezes, surprisingly pressing ALT+F4 works like a charm to make mouse work again (by mouse I mean pointer actually,I think may be it's because any virus/malware or whatever that was, and also I was planning to change my OS to Windows 8 (it's after 10-11 month of purchase date), so I decided to format anyway, instead messing up with mouse freeze problem.
I'm not able to start my BIOS setup, nor able to use quick boot option (to select various bootable device option from list)
I try to press recovery key (small button near power button), that open recovery module properly (no glitch/error).but unfortunately I don't have any backup made previously so no use of recovery module.
and then I restart my laptop, then I press F2, it shows the first screen of BIOS menu, but my system stuck there (unresponsive state), i've no option else directly turning it off by holding power key for few seconds,..
and then no boot menu F2, F12 still unresponsive.
means whenever i open recovery module it able to open F2 menu (not F12) but that stuck too.else it just completely ignore F2, F12 I'm not a computer noob (not flaunting), but I spend last 4-5 hours looking for a solution for it, but couldn't find any solution by myself.
although my laptop is not in not working state. somehow I manage to install windows 8, but it's really weird that I can not access BIOS menu, my laptop is no longer in warranty period so I can experiment with it any way I want.
I am facing this problem for last few days with my ~3 months old Lenovo G580 laptop.
One morning, i switched on my laptop and found the battery indicator showing "88% available (plugged in, not charging)". and when i removed the power adapter, the laptop would just power off.
in short, the battery is getting detected but is not charging or working anymore.
At first i thought it was some software/driver problem but then, i checked the Lenovo "Energy Management" tool and found that it was showing the battery status "Destroyed" (Screenshot below.)
Link to image
My system details:
Lenovo G580,
Core i5 3rd Gen, 4gb DDR3 RAM and 500GB HDD
OS: Windows 8 64bit
I have a "HP Pavilion TouchSmart 14-n005eo Ultrabook" running windows 8.1. This last Friday my computer got stuck and when I tried to reboot it said that something was wrong with windows and gave me the alternatives to fix it. I first tried to backup trough the program but got a Bluescreen (System thread exception not handled (iaStorA.sys). I then tried to just restore the Windows part (not effecting my files) but I got Blue screen. I then moved on to a full system reset (with my recover DVD that I fortunately had made just a couple of days before the crash) but after completed all 5 discs the computer rebooted and told that the system restore wasn't completed so I tried again, but I got the same problem.
The last thing I have tried is to make a factory reset and now (after the 5 disc) it started to reboot and a information that told that HP software were about to get installed came up. I left the computer to finish the install and when I checked later on it was turned of so i turned on the PC and after the message "Wait" I got Blue screen again (System thread exception not handled (iaStorA.sys)) and the same happens when I restart the computer.
I have bought Lenovo Essential G580 (59-324061) Laptop (3rd Gen Ci5/ 4GB/ 500GB/ DOS) on Feb 2013, its out of warranty now.
I have installed Ubuntu in the laptop, not sure how i formatted the hard disk during installation. I guess it was full format of hard disk during installation (while selecting hard disk).
Till today everything was working fine. From today morning, there is always a Boot menu which is being displayed with following options:
1. ubuntu
2. PCI LAN: Atheros Boot Agent
3. ATA HDD: ST500LT012-9WS142
4. ATAPI CD: MAT**bleep**A DVD-RAM UJ8D1
I have pressed enter in both Ubuntu and ATA HDD options. But after a brief duration the control comes back to the same menu I have specified before. How to boot to ubuntu.
I am having a bit of trouble with this G580 lenovo laptop, which can't boot.
Problem: HDD and CD/DVD is visible in info tap in bios, however they are not visible in the boot tap, only EFI network IP4 and IP6 are visible.
I tried switching the HDD at first just to make sure if it would do anything, but did not work, so i switched back. so what to do.
The bios version installed is V9.01 .......
I have recently downloaded a BIOS update for the G580 - version 20150, and ever since that I am locked out of the BIOS setup menu. It asks for a password, however I haven't set up one, and such, I am unable to change any of the settings.
Changing the values there would be important, because the settings seem to be reset to a default state, for example, I am unable to start any 64bit virtual machines because hardware virtualization is disabled. I was running Qubes OS too, but I am also unable to boot off legacy (MBR partitioned) devices, which I do occasionally to test some new Linux distro when it comes out.
Apropos Linux: as soon as the system starts booting, the screen goes completely blank, and I have to keep pressing brightness-up to see if the system had started. Brightness controls also seem to behave strange under MS Windows too: on the lowest level instead of dimming (what it did before), the screen goes completely blank. The only good thing in this update is that bluetooth now seems to work more reliable under Linux.
Is there a way to remove the password lock from the BIOS and/or revert to the previous version to avoid the screen blanking issue? Would reverting the update also remove the password? If the password can't be removed, is there a safe way to change the settings from a running OS?