Lenovo P/Y/Z Series :: IdeaPad Y410p Boot Taking More Time
Feb 8, 2014
I got my Ideapad y410p a week ago. It came with Windows 8 and many useless softwares installed. It was taking around 3 minutes of time and immediately i updated my os to 8.1 (x64). Even after updating to 8.1, the boot time didn't get any better. I unistalled useless softwares like Mcafee, Cyberlink tools and many and installed AntiVir and Visual Studio. Turn on Fast startup is also enabled. But what is painful is it still takes 2 minutes and 31 seconds plus to load my desktop. What is more painful to me is My old laptop (Amd Dual Core, 3GB Ram with Many softwares installed with windows 7) loads earlier than this.
Lenovo Y410P, Interl Core i7 4th Gen, 8 GB RAM, 1TB HDD, 2GB Graphics
View 4 Replies
ADVERTISEMENT
Apr 4, 2014
I recently recieved a y410p ideapad I ordered off the lenova website. However, it won't start up. When I try, it brings me to a blue screen with a sad face that says I need to do an automatic repair. This flashes for about two seconds before disappearing and the screen becomes grey and says "lenovo" and "Starting Automatic Repair". From this the screen goes completly grey, and has nothing on it. The computer stays this way for hours and the fan will continue to run. I've tried the reset button on the side and resetting the laptop, but no matter what I do I end up back at that grey screen.
View 5 Replies
View Related
Feb 4, 2014
I was using my laptop today and tried to connect to a wireless network. However, my network connections does not allow me to connect to it, and when I tried to troubleshoot the issue, it told me that I needed to plug in an ethernet cord. Looking under the control panel also showed that the option for wireless had disappeared.
View 3 Replies
View Related
Nov 14, 2014
But is it possible to upgrade my graphics card from GT 755m to GTX 780m ? Or is it soldered or something ?
View 1 Replies
View Related
Nov 2, 2014
I have a y410p with windows 8 on it. I recently installed a debian based linux alongside windows so I can dual boot them.This required me to also add Grub to the the disk. But grub was in legacy mode and i had problems booting up win8. So, I used boot-repair to try to fix it, but it seems to have gotten worse.
View 3 Replies
View Related
Jul 19, 2013
Unfortunately I woke up this morning to my Y410P stuck with the Lenovo logo and text saying "Preparing Automatic Repair". After a few moments it will say "Diagnosing your PC " and then "Repairing disk errors. This might take over an hour to complete." Then after a few seconds it restarts and everything happens again.
View 9 Replies
View Related
Dec 9, 2013
I have a: Lenovo Ideapad y510p
With: Windows 8
My problem:I can't type and move my mouse (trackpad, touchpad, whatever) at the same time. This means i have to use a USB mouse to play most video games.
View 2 Replies
View Related
Mar 14, 2014
I have lenovo ideapad z510 came with windows 8.Then I have installed ubuntu 13.10 on it. But when ever I turn on my laptop in ubuntu brightness set to 0 & I have to manullay adjust it.
How could i turnoff it s.t. it stays as it is.
View 1 Replies
View Related
Feb 11, 2014
I bought the Lenovo Ideapad Z500 and I'm trying to boot from a USB drive in order to install Windows on it. When I start the boot menu I only see the hard-drive, the DVD and the network. I tried to set both UEFI mode and Legacy mode in BIOS but the USB stick does not appear in the menu when I boot. I put the image of windows with Windows 7 USB DVD Download Tool which formats the stick in NTFS mode.
I have the latest BIOS v1.21 and I tried with 2 different USB sticks: one 16GB USB 2.0 Corsair and with a 32GB USB 3.0 ADATA both on USB 3.0 and USB 2.0 ports on the notebook. I really haven't seen anything like this in my entire career.
I even downloaded the file efiootBOOTX64.efi and replaced the one that Windows come with on the specified folder on the USB stick ....
Why is so difficult to choose the USB boot drive on the newer notebooks? How can I boot from USB?
View 5 Replies
View Related
Feb 5, 2014
Just got the y510p laptop and am trying to install Ubuntu so I have this bootable DVD and I wanted to try Ubuntu before installing as usual but I can't get the laptop to bot on dvd. On boot menu options there is only EFI and some kind of network options but no dvd. I tried following instructions here but no matter how many times I press F1 during startup, I can't get to boot menu and windows starts directly: [URL] Is it not possible to boot on dvd. The dvd is ubuntu 13.10 supposedly compatible with EFI and secure boot. I don't understand why there is no option to reorder boot devices like on all my older PCs.
I manage to get BIOS setup pressing restart and shift and then selecting UEFI firware settings and I do get to bios setups but again no way to find the option for booting on a dvd.
View 7 Replies
View Related
Oct 26, 2014
I'm trying to Install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can't even get my laptop to boot from external media. From the InsydeH20 Setup Utility, I've so far disabled Secure Boot, set Boot Mode to UEFI, enabled USB Boot, enabled PXE Boot to LAN, and set my EFI boot order to 1) EFI Network 0 for IPv4, 2) EFI Network 0 for IPv6, then 3) Windows Boot Manager (no other options). I'm not actually trying to boot from a network, I just want to boot from the onboard DVD drive or my USB DVD drive. When I boot with these settings, I get the error: EFI Network 0 for IPv4 (...) boot failed, then a similar one for IPv6, then it boots to Windows. Why can't I boot from DVD or USB?
Another thing I've tried is setting Boot Mode to Legacy Support and Boot Priority to Legacy First (with Secure Boot disabled) which results in my laptop booting to straight to Windows even when USB ODD is first in the boot order.
View 4 Replies
View Related
Dec 10, 2014
My Lenovo z570 will not boot from CD. I have the system recovery CDs and another bootable CD that work in another Lenovo so I know the discs are fine. The boot order is set properly (CD first) and even hitting F12 on the boot up and selecting the CD drive again doesn't work. The drive does work - I can burn and play CDs. I uninstalled the drive and reinstalled and updated the BIOS to the latest. I see others with this problem have been advised to change UEFI or Secure Boot setting but these options are not available in my BIOS.
View 1 Replies
View Related
Nov 22, 2014
I have an IdeaPad V570 that experienced a total hard drive failure (be careful how hard to close the laptop in frustration) I had Best Buy try to recover data and opted not to pay for the recovery after the only crucial data did not seem to have been recovered. Best Buy told me the rest of the system seems to be intact so they could install a new Hard Drive if I wanted it back. They made me offers to completely restore the system at a price but I decided to save money thinking I should be able to restore the system myself. So they installed the hard drive and that was it.
I decided to go with Windows 8 after learning that support was beginning to wain for Windows 7. I purchased the OS from Best Buy and I am attempting to install it. So far that is not going well. The BIOS sees the CDDVDW drive and the HDD, both are listed in the BOOT menu with the right names. However the computer is not booting from the WIndows disk. I get a message ending with :
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
At which point it take me to the Boot Menu. I can see the order I have set for Booting is:
1. ATAPI CD: TZSSTcorp CDDVDW TS-L633F
2. ATA HDD: WDC WD10JPVX-22JC3T0
3. PCI LAN: Realtek PXE B03 D00
It seems to me that the system is trying to boot in that order but the CDDVD drive is not responding, the HDD has nothing on it so it goes for the PCI LAN and there is nothing for it to do so it returns the error an sends me back to the Boot Menu.
View 2 Replies
View Related
Jan 9, 2014
My z500 cannot boot up without power cable plugged in. Usually,a few seconds after I saw the lenovo logo,the system will suddenly shut down just like the battery was removed.however,if I connect powercable to the laptop and power on,everything is fine,I can enter windows 8,or ubuntu,after I enter OS,I can disconnect the power cable without any problems.the battery is healthy and can last for more than 2 hours.
So far I tried the following methods:
1.update BIOS
2.update battery firmware
3.reset BIOS
none of them worked for me....
View 3 Replies
View Related
Oct 19, 2013
Yesterday, I updated to win 8.1. The process appeared to go smoothly, but I now have a number of issues:
1 If I close the lid and reopen, the sytem does not wake up. It does not wake up if I press the power button. All I can do is a hard shutdown and reboot. This occasionally gives an error message on restart, but has not produced any solutions.
2 There is a message about secure boot not being configured
3 The support app has a cross on it and won't work
No doubt there are other problems, but number 1 is the killer....
View 9 Replies
View Related
Jul 13, 2014
I tried to install a new version of Win7 on my ideapad U300s from a usb that set to be a bootable device containing *iso file.
I also set USB as first boot priority in BIOS setting, of course. But when the installation began, I canceled them all and restarted my laptop but found it troubled.
Here is its error report.
From then, I can no longer boot my laptop from USB as well as enter BIOS setting to set back HDD as first boot priority.
Both Enter/ESC make it restart and then turn to this dumb black screen.
I think I should remove the BIOS battery to turn BIOS setting into its default, shouldn't I?
View 1 Replies
View Related
Mar 18, 2014
For the first week or two it worked fine and everything was going really well. Then about a week or two ago it started acting up. It is freezing programs(firefox, IE, Chrome, explorer, Flash CC, blender, and a few other programs I needed to install for school. It sometimes freezes on startup and I have to hold the power button down to restart it. Sometimes when it restarts it takes 10-15 mins to fully boot up and load up to the login screen.
View 4 Replies
View Related
May 17, 2014
It started at 17% and even though it says it's plugged in and charging it doesn't do so. On " Energy Management" I have it set to 'Maximum battery life', the charging status says its 'charging', and the battery status is 'Good'.
View 1 Replies
View Related
Jun 15, 2014
Alright, so early January this year I got myself a Y510P. I bought this cause I already knew I'd be transitioning to different locations and that a desktop wasn't going to be practical. I intended to work with on school, watch movies, game, etc. All of these went perfectly fine
At the end of January I studied abroad till the end of April. During this time I rarely had time to do a lot with my laptop as I was quite occupied with school and social life around it. The few times I did use it for things like watching a movie or play a small game were fine. Anyway, when I came back home in the Netherlands, I noticed that it had slowed down considerably. It tends to take long with simple tasks and unfortunately gaming has become something I can't do anymore, hell, in online games I get called 'wooden pc guy'. Obviously I'm not very happy with my laptop feeling like a machine from '98.
I tried cleaning out my disk, defragging, registry cleaning, scanning for viruses, etc. Nothing works, I want to reinstall my OS to see if it might work, but when I ordered my laptop, I never received an install disk for Windows 8 with it....
View 4 Replies
View Related
Apr 13, 2014
Using my Ideapad Y410p this morning (six months old), the computer abruptly crashed and shutdown with no warning of any sort. Straight to black screen and lights went out. I thought perhaps it overheated and shutdown as some sort of safety measure, as my old Dell used to do that. The laptop was warm, but I've seen it get hotter and still perform.
Now I can't get power back. Pressing the on/off button doesn't get me any sort of noise or lights. Tried unplugging the battery and AC power for a while, and still not working. Held down power button several times seeing if it would reset something. Opened it up the cover and took a look but didn't see anything wrong. Popped the RAM cards in and out. It's just dead in the water.
View 9 Replies
View Related
Feb 16, 2014
I was trying to access my BIOS recently, but whenever I attempt to do so, all I get is a constant beep sound. I used to be able to access the BIOS just fine, but now I can't. The computer itself still boots fine, though I also can't select any boot options either.
I thought I could fix this by resetting the BIOS, but there doesn't appear to be any way of doing that. The CMOS battery is nowhere to be found, and there is no BIOS update for the Y510p that I can apply.
I can get back into the BIOS?
View 8 Replies
View Related
Feb 7, 2014
I have this beautiful laptop and I picked up an SSD since it doesn't come with one. I am placing it in the Caddy.
Is there a way to move Windows 8 to the SSD? I can't use a download an ISO from Microsoft since the serial is licensed to the machine. I would like to put it on a USB, or just install straight to the SSD.
View 7 Replies
View Related
Jan 30, 2014
I installed Windows 7 onto my y410p without a problem but now I am not able to get into the BIOS. Are there specific instructions for how to get into the BIOS in Windows 7? how to?
View 1 Replies
View Related
Apr 24, 2009
Here is the thing, I only have used 285gb of 500gb on my internal hard drive. I got myself a new 500Gb external hd as a time machine.
However, when I go to the time machine' options it says: Total included: 503.1gb
How can a backup be bigger than my internal hd?
View 10 Replies
View Related
Jan 5, 2015
I updated my computer to windows 8.1, and now it doesnt recognize the Nvidia 755M graphics card. I even went to this URL... website and tried to run the .bat file, but it showed up with an error stating "Error: Invalid Display Adapter Index specified".
View 9 Replies
View Related
Feb 12, 2012
My Y410p is about six months old. Today, while using the computer, the touchpad stopped working suddenly.
Touchpad is enabled in mouse settings, and device manager says drivers are up to date and that the device is working.
However, the touchpad is completely unresponsive, and restarting the computer didn't do anything. Is there anything else that could be done? Or should I believe that this is hardware failure?
View 2 Replies
View Related
Feb 25, 2014
I tried to install Windows 7 on my computer and it was stuck at "Starting Windows." I turned off the computer (held power button) and when I boot it up it said "Resuming Winfows." Then it went to a black screen. So I turned it off again and it went back to "Resuming Windows." I pressed CTRL + ALT + DELETE and it said resume windows or start windows again. I said start windows again and it went to frozen at "Starting Windows" and I can't boot it up or factory reset.
View 5 Replies
View Related
May 28, 2014
I knew that the Nvidia GPU triggered only when a 3D graphics heavy application is loaded. It is. But I only get a bad 3D rating (1 star or so) while playing the game.
I've configured the Nvidia 3D program setting and also on a high performance battery plan. The Nvidia notification icon tray is also show that the game is loaded using the Nvidia GPU.
On other hand, when the laptop is plugged in, I get a best 3D rating on the same game. How is it possible?
It is not comfortable due to the fact that I have to plug in the laptop whenever I want to play the game to get the best performance.
View 7 Replies
View Related
Feb 13, 2014
I just bought and received a y410p with the hybrid drive. I have a 120gb ssd that I would like to make a fresh install on. Where do I get both the iso and the window's key? My box didn't come with any disks or windows key. I don't really wish to just clone the hdd since there is so much lenovo branded junk included. What are my options?
Edit: Would I also have to install all of the drivers separately? I've not used windows in some time now. I've been running linux for quite awhile and it picks up most hardware without dealing with drivers.
View 5 Replies
View Related
Mar 9, 2014
My fairly new Lenovo Y410p funtions extremely well when playing a video game, but only when connected to a charger, as soon as I disconnect the charger, my framerate can drop to upto 1/8th of the original framerate. It is always connected to the NVidia Graphics Card, the power plan is always on high performance, and the minimum processor state on battery for the processor power management is 100%. How I can fix it? Am I missing something fairly obvious, or is there a defect with my computer?
View 2 Replies
View Related
