Lenovo P/Y/Z Series :: Unable To Enable WiFi Using Function Keys - Y580
Oct 2, 2012
I have a problem, normally I press Fn and F5 to bring up the window to enable/disable Wireless Lan and Bluetooth. But it's suddenly stopped working and I cannot switch on my Wireless Lan.
This is on IdeaPad Y580 running Windows 7.
1. When I press Fn F5 no window opens.
2. When I press Fn F6 my track pad is enabled/disabled as normal, although I do not see the notification on screen.
3. When I press the Fn and volume or brightness controls, they work perfectly, but again I do not notification on screen, the bars showing level of volume or brightness.
4. Also the One Touch Recovery and One Key Theater buttons are not working. But the audio Mute button is working.
5. I have uninstalled the Lenovo Energy Management software and reinstalled it but no difference.
6. I have checked the BIOS and Wireless Lan is enabled.
7. I also saw that in Task Manager I cannot see utility.exe running.
The numbers 1-4 on my Y580 keyboard don't work anymore. I only realized this recently as I had been using a separate USB keyboard for some time. I've tried all sorts of things - uninstalling and uninstalling the keyboard drivers in Device Manager, reinstalling the BIOS, unchecking all the boxes under the accessbility options, scanned the computer for malware...but nothing seems to work.
I've also installed Windows 8.1 and replaced my HDD with an SSD...
Yesterday everything was working fine, I turned off the laptop, went out, turned it on in the morning and bam, no internet. I reinstalled drivers, then reinstalled the system and nothing changed. It certainly isn't router's fault, since other devices can connect to the Wi-Fi
I solved it, somehow wireless network card got turned off and I just figured out Fn+F5 prompts a window where I could turn it back on.
My laptop has a keyboard where i have to use the FN key to use the function keys at the top, instead of having to press the FN key to use the action keys. ive been looking everywhere for a way to make it so i dont have to press the FN key to use my function keys, i looked at the bios but i dont see an option to disable the action keys, nor can i find an option anywhere elce in my laptop to set it like that, id even embrace an option to go into the registry to swap the on/off signal of the FN key.
The default behavior of F1 through F12 keys on the z500 are set to perform laptop functions like mute, turn sound or brightness up and down and so on.
Is there a way to reverse the way F1, F2.. F12 keys work, so they work like on any other regular keyboard.
I use the basic functionality of the F-keys all the time, when renaming files, searching and so on, and I would like to be able to use them without having to press "fn" every time.
I recently purchased an Ideapad P400, and I have noticed that the default for the keys where F1 and F2, etc. usually are, are now the mute and volume buttons. To access the F1, F2....F12 keys, you now have to press Fn + your desired F key.
While I understand many people probably find this useful, I play several games where these keys are essential, and it makes playing the games nearly impossible to play if you have to hold down the Fn key in addition to the desired F key. So my question is, is it possible to reverse the Function keys? I would much rather press Fn + F1 to mute than have to press press Fn + F1 to access F1.
S440. I prefer to use the function keys F1-F12 without using the Fn key. It seems like in other models there is an option in the BIOS to change this, but not on my machine. Also the Lenovo software nor Windows configuration seems to be able to change this. Is there anyway to do this?
I don't want to use the BIOS update method because I think it will make my computer not working anymore.
How do I press [F1], [F2], [F3], [F4], [F5], [F6], [F7], [F8], [F9], [F10], [F11] and [F12] without everytime pressing [Fn] to use these keys. So the original keys are: [Mute], [Vol-], [Vol+], [Close], [Refresh], [Touchpad], [Airplane] [Apps], [Screen], [Projector], [Bright-] and [Bright+], I want them to be: [F1], [F2], [F3], [F4], [F5], [F6], [F7], [F8], [F9], [F10], [F11] and [F12], and when you press [Fn] they be: [Mute], [Vol-], [Vol+], [Close], [Refresh], [Touchpad], [Airplane] [Apps], [Screen], [Projector], [Bright-] and [Bright+].
I recently downgraded my G710 from Windows 8 (which it came with), to Windows 7. The only issue I've noticed is that it does not display anything on screen when you use the function keys, such as the volume up or down, or bright ness up or down. The keys work, but it would be nice to see on screen that my volume is set at 2% vs say 100% when I'm turning it up or down.
I have a Lenovo G480 that runs on windows 7 64 bit. I reformatted it and i noticed that when i perform a fn+key the display notification no longer shows. It works though but i wanted to see the display notification on the screen every time i perform i do fn+key.
I've bought Lenovo M490s notebook one week ago without OS. I've installed Windows 7 Professional x64 retail.First of all I could not find software that controls Function keys. After installing every driver and software from support page (M490s) my function keys just doesnt work except Fn+F1 sleep, Fn+F2 turn off the screen, Fn+F6 disable touchpad and play buttons. Also no information was displaying on the screen after pressing such buttons - no volume and brightness level.
After doing some research I've found and installed Hotkey Features Integration from Lenovo M490 (without S) support page. Every function key is started to work, information on the screen also begin to display (volume and brightness level).Now I spotted a huge problem, after 3 or 4 hibernation volume and brightness keys (fn+up,down,left,right) just stopping to work!!! Fn+F1-F12 combinations are working normal. Then after reboot brightness and volume keys are working again!!
I have a problem with a G550 laptop, running windows 7. No matter what I do, wifi will not work. When the manual switch is set to wifi on and i press fn+f5, nothing happens. The wifi card is recognized in windows, i have the latest drivers from lenovo support page and so on. I have tried literary everything, including windows reinstall and still nothing. When I run windows diagnostics it also says "wifi options (or something like that) are not enabled" and i tried with readycomm which says the same thing.
I have an Aspire 5733Z laptop and I love it dearly. I just recently lost the capability to adjust the volume using the keyboard shortcut of Fn key with up or down arrow keys. I have uninstalled and installed the Realtek HD driver.
I did a clean install of Windows 7 Ultimate version x64 on my Sony VPC-CW13.
But the function keys are not working properly. The volume one work but no OSD. Contrast, and monitor selection one since like it is not working at all.
any tips?
I install all the driver available on the esupport.sony.com website, but still no luck
Just got a T440p and it's working fine. BUT when I go into an application like Word and either hit the function key or combine it with the Alt, Ctrl, or Shift key, I still get the default action of the Funciton key. For example, in Word, the Alt-F9 combination is used to display field codes. When I do that, however, I get the Control Panel popup. Similarly, in a browser, I should be able to hit the F12 key and get the Developers pane at the bottom of the screen. But instead in IE, Chrome, and Firefox, I get a My Computer popup.
I just purchased a new E545, which has the unusual keyboard layout that I like -- the Control key inside of the special Fn key. Of course, it seems Lenovo has gone and switched the way the function keys operate so that now you have to press the Fn key to get the F-keys.
How can I swap the function keys operation so that I need the Fn key to operate the PC and media controls?
Is there any way to change the default behavior of the function keys (e.g., F1, F2, F3...) back to function keys like all other computers? When using Excel, it is extremely annoying not to be able to access key one-key functions like F2 and F4.
I have installed the latest driers and since then I am unable to change the screen brightness using function keys. I have installed multiple driver updates hence it is difficult to find out which driver is causing the issue.
I spilled drink on my laptop. This has resulted in dead keyboard. I ordered new one and i don't wanna send my laptop away for few months. So i m gonna change it my self. It's not first time taking apart my laptop (well it's first time taking apart y580).
I purchased a Y580 a while back, and I am not getting black bars on the monitor (shown below). At first it seemed to be there randomly. But now it is on constantly. Opening or closing the screen at different angles does not change it. If I connect an external monitor, it has no issues. I can also see the black bar when windows is booting up as well. And it shows when I am in BIOS.
First - temp issues: The bottom of my Y580 has been getting extrememly hot and my temp monitoring program says "GPU temp limit reached".
By hot, I mean if it comes into contact with your skin, it will give a light burn causing a red burn mark. This only occurs when I run something on my 660m like a game or other programs that make use of it. After it gets like this everything begins to freeze up perodicly and FPS drops to un usable levels.
I know the heat is to be expected with performance demanding applications, but this seems abnormally hot. I've opened the case and cleaned the fans and vents.
The fan doesn't seem to kick up very high like it does on Dust Extraction and I can't find anything to control fan speeds. I've also noticed that the AC power brick gets hot enough to melt thin plastic, like a grocery bag.
While the temps aren't a huge concern, the performance impact/FPS drops is. What can I do about this temperatures other than put a "caution contents may be hot" sticker on my laptop?
Second - black flash. Occasionally (once and hour) during a game or program running on my 660m the screen will have an all black flash for 0.5 second.
If I tab out and have a window running over a program running on the 660m the screen will begin to flicker all black for that window only. Like task manager over a 3d game. Drivers and everything are up to date and I've done clean installs.
I've been using my Y580 for a little more than a year now and I absolutely loved it. Recently though, my graphics card has completely dissappeared. This happened after playing an hour or so of Titanfall (which ran really well) and attempting to update my nvidia drivers. I was not able to update the installation using both Geforce Experience and manually. While downloading manually, I noticed that their website was not able to detect my graphics card. I then checked the device manager and all I could see was the Intel card. Later on, the Nvidia control panel was also unable to detect the card.
I decided to uninstall all my drivers and start again with the one on the Lenovo driver page. I was able to successfully download the driver and it made the 660 appear in the device manager. This did not solve my troubles because when I tried to play a game, the 660 dissapeared again. I then looked through the BIOS and I was also unable to find the card. Frustrated, I did a system restore to before I first downloaded the driver. Once again, the 660M briefly appeared again but dissapeared when I tried to game or update it.
Computer: Lenovo Y580 External Monitor: ASUS PB278q Intel Adapter: Intel(R) HD Graphics 4000 Driver Version: 8.17.12.9555
I am trying to get 2560x1440 graphics to be broadcast to my external monitor over HDMI
When I try to create a custom resolution in the Graphics Control Panel one of three things happens.
1. I get a message saying that the resolution I am trying to create isn't possible
2. I create the custom resolution, however when I try to adjust it in the Screen Resolution menu Windows tells me that it can't broadcast the resolution.
3. The resolution broadcasts, but it is terrible quality, and looks like it is vibrating.
*Note: I had this setup previously, but I had to reinstall Windows recently, downgrading from Windows 8 to Windows 7, and now I can't get it to work.
I was trying to watch a DVD on my laptop and kept receiving an error from PowerDVD 10, saying that it was an invalid media type. After looking online, I noticed that some people said that the update might fix this. So, I downloaded the update and ran the installer. It required that I remove the current installed version of PowerDVD in order to install the patch. After the installer wiped that from my computer and began to install the patch, I received a message stating that "This software can only be installed on a Lenovo system." This was a patch file that the program sent me to, called "PowerDVD_v5630_RiTA10(Lenovo)(PDVDServDelayStartup)_DVD130802-14.exe"
After looking at this, I went through the knowledge base and found that there is another file linked for updating the PowerDvd software called "Lenovo.Lenovo_RiTA10_v_DVD110707-07.exe". When I tried to run this I get the following error:
"Cannot install the patch. Either this patch is not intended for your version of PowerDVD 10 or your system does not have a previous version of PowerDVD 10 installed. The patch installation will abort."
Of course I don't have any previous version of PowerDVD 10 installed, because the other patch uninstalled it in order to install. Now I am stuck without the DVD software in this terrible Windows 8 environment. I even tried VLC player and the video is cut off. This is very frustrating. This is on my IdeaPad Y580.
I have an IdeaPad Y580, and I want to disable the Nvidia chip in the BIOS (I run Linux on it and don't use the chip.) I have the BIOS updated to the latest version from Lenovo's website. I couldn't seem to find anything in the BIOS settings that would allow me to just use the Intel HD 4000 graphics. There was an option to change from "Switchable" graphics to "UMA" graphics, but from my understanding the UMA option means using the CPU to process graphics instead of even the Intel integrated.
Is there any way to turn off the Nvidia chip, or am I stuck with it being on?
I get the "failed configuring windows updates reverting changes" message when i try to update my computer, how can i make sure that the updates go through?
I pressed the power button and the light came up for about 5 seconds. Then it's gone. Nothing came up on the screen. Cpu fan did not work and keyboard light did not turn on. I tried holding the power button for seconds. I tried turning on with ac adaptor only. I tried taking the RAM out and then turned it on. Nothing works...
I am a Thai student studying in Okinawa, Japan. So now I am just so nervous because I wont have a computer to work on.
