occasionally, my sl410 started to display in 1280х800 instead of 1366x768, so I see an image shifted to the left and down and black ribbons at the top and on the right. And this happens even in bios. In ubuntu, display setting do not let me change to 1366x768 as there is no such option in a list, only 1280х800, 800х600 and less.
View 5 Replies
I have a Lenovo SL410, model 2842. The video card in my machine is Mobile Intel R 4 Series Chipset Family.
Just got a new 23" monitor which recommends resolution setting 1920x1080. I quickly learned that this resolution cannot be achieved with the VGA cable (highest was 1366x768), so I switched to an HDMI cable. When I first booted up the computer after connecting them, it was perfect. Icons were rearranged, but that's no big deal. About an hour later, I had to reboot for another reason, now it's behaving just like it did with the VGA cable. Samsung support says I need to update video card drivers, but I checked that (via the windows interface), and it says I am current. Now I can't get to display with 1920x1080 resolution again.
Since it displayed the higher resolution briefly, I imagine it must be possible to configure the settings so it will stay that way.
I'm running a Lenovo Thinkpad SL 410, and am curious as to if it's ok to get rid of some bloat ware. I'm using PC Decrapifier to get rid of things like Norton, which constantly send pop-ups on start up taking up memory and bogging down the system all together.
I don't use any of the features such as thinkvantage toolbox, mainly because it takes 5 minutes to load up and then another 5 minutes to load each page, or even scroll down certain logs. This was happening the day I booted the system so it is not a malware concern.
Before I go ahead and uninstall random things, I like to do some research and see if I need it and if it will ruin my laptop with out it. So far I haven't seemed to be able to find anything on getting rid of certain built in software like Lenovo's Thinkvantage Toolbox.
I have a lenovo T510 which has a maximum res of 1366x768 it has nvidia NVS 3100M graphics.Ive checked with nvidia and it says the gfx card supports 1920x1080.
If its possible could i buy a 1920x1080 lcd and fit it to this laptop without any problems.Or shall i just buy a 1366x768 lcd.
I just got my new Acer Aspire V14 touch (Windows 8.1) and want to connect it to my Sharp Aquos LC-32DA5U TV via HDMI. I can see the picture but cannot adjust the screen resolution to the native resolution recommended for this TV (1366x768). Funny enough this is exactly the resolution my laptop is using.
When I force use of this resolution via show all in the display properties, then I don't get a picture but just a black screen on my TV.
Is there any other driver etc that I need to install to make this work? It worked perfectly fine as PnP with my old Lenovo computer under Windows 7.
So I just had Windows 7 reinstalled as my harddrive died. But after the reinstall, Windows 7 only detects my laptops native resolution (recommended resolution) as 1280x800.
I know this laptop has the 1440x900 display, I have coworkers with the same laptop and their display shows the "recommended" is 1440x900, and I know that was the case before I lost my drive and got a new one with a reinstall.
This laptop has the NVIDIA Quadro NVS 160M adapter, and I have the latest driver for this from NVIDIA.
Why does windows think my native resolution is 1280x800. I can use the NVIDIA driver to force it to go to 1440x900, which works. I was just wondering why it is doing this. Is there some inf package that I need from Dell?
thinking of getting the Vaio Z but still cannot decide which resolution to go for (1366x768 or 1600x900). I've got some pics that should help you guys out. Unfortunately, I do not have any side by side comparison photos between the 2 of them. Furthermore, I do apologize for my very poor camera & photography skills.
One thing to take note of is that for both Vaio Z, all the setting are in their "default" values (Default screen resolution, 96 DPI, etc.)
For all the pairs of photos:
Left - 1366x768
Right - 1600x900
Windows Vista Section
Below are the Windows Vista boot-up screens:
Below are the Windows Vista login screens:
Below are the Windows Vista Desktop screens:
Below are the Windows Vista Desktop screens with the "Start" buttons activated:
My sister wants to buy a netbook and likes the Mini 10. We both prefer to buy from the Dell Outlet (and I've got a coupon right now) and they've got quite a few of the regular Mini 10 units (not the 10v) in stock.
My instinct is to go for the higher resolution (1366x768) display vs. the standard-issue netbook WSVGA (1024x600) display. But I'm wondering if the 10.1" display is too small for the high resolution?
How do the two displays compare in terms of brightness, contrast and overall image quality?
all available screen resolutions on the full hd version (1920x1080) of their 6930/6920? I'd like to know if it can be reduced to 1366x768 before I buy the notebook so I can have a true pixel for pixel reproduction when connected to my HD ready plasma. I know I could just buy the lower resolution version of this notebook but I've read that 768 vertical pixels is not enough for this 16" display, too much scrolling it seems and one review even said that graphics on the screen look almost jagged when compared side by side to a notebook with a higher resolution.
View 10 Replies View RelatedGood news for people thinking of getting the Vaio Z but still cannot decide which resolution to go for (1366x768 or 1600x900). I've got some pics that should help you guys out. Unfortunately, I do not have any side by side comparison photos between the 2 of them.
One thing to take note of is that for both Vaio Z, all the setting are in their "default" values (Default screen resolution, 96 DPI, etc.)
For all the pairs of photos:
Left - 1366x768
Right - 1600x900
Windows Vista Section
Below are the Windows Vista boot-up screens:
Below are the Windows Vista login screens:
Below are the Windows Vista Desktop screens:
Below are the Windows Vista Desktop screens with the "Start" buttons activated:
I have a Latitude E6530 and I'd like to upgrade the resolution to 1920x1080. What cable and LCD part # (or compatible) do I need? The panel is easy enough to replace but I have no idea about the LCD cable.
View 9 Replies View RelatedJust upgraded from Windows 8.1 preview to Windows 8.1... since then my display doesn't look right at all. Resolution seems to be set to 1920x1080... which I belive is correct.
But text, icons and windows seem bigger than they were before.
Also the display is lacking sharpness around text. Do I need to upgrade some drivers or something?
Is it possible? I feel I am not benefitting from 1280 on this 10 inch screen.
View 5 Replies View RelatedI have the thinkpad w540
ID:
20BGCTO1WW
videocard:
nvidia quadro k2100m
Where, where! does it tell me the maximum resolution of an external display using the displayport.
I have connected a Dell U2713HM to my W530 using mini-DP->HDMI adapter (type2-ps8402a) and then a HDMI cable.
Most i can select is 1920x1080, but the U2713HM has de capacity to run 2560x1440
I recently bought this dell monitor and am trying to connect via a mini displayport to Dual link DVI adapter to a Dual Link DVI cable to the monitor.
Cant see an option for increasing resolution past 1080p.
Have upgraded Intel 4000 dispay driver and installed the U2713HM driver.
Does the x1 carbon (3443CTO) support 1440p?
I am to be the lucky owner of an X1 Carbon soon. There is one thing that I can't find the answer for in the documentation and spec sheets:
- what is the maximum resolution that the mini displayport can handle?
The display that I'm looking to buy is running 2560 x 1080.
I have a X230 (model 2357G) with a type 4338 dock. I'm currently running dual 1920x108 monitors via the dual DVI ports in the dock. But I wonder if the dual Displayports in the dock can handle something with a higher resolution like dual 3840x2160 monitors ?
View 5 Replies View RelatedI have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
View 1 Replies View RelatedI have an HP dv9000 laptop.
It came with Windows Vista, at one point I was dual-booting Vista/XP, and I am currently using Windows 7beta.
I recently went in my bios settings and tried to enable native sata support, and after that, my computer wouldn't go into Win7, until i disabled it again.
It was enabled when i first got my computer, and i had to disable it for XP compatibility. I figure, if it works with Vista, there's no reason it wouldnt work with Win7. Perhaps it's configured to run without the setting, so enabling it effs it up and confuses it. is there any way i can enable it again, preferably without having to do a full OS install?
My TV's native resolution is 1366 x 768. My VAIO FW-190 has Intel Chipset and both the Windows built in software and Intel provided graphic card settings software do not show the 1366x768 resolution. I can't find a way to set the Vaio's HDMI output to that resolution.
View 3 Replies View RelatedCalibrated by SPYDER3 Elite
View 8 Replies View RelatedJust logged on to dell's driver site. WOW, new drivers dated yesterday for fingerprint. Finally i'm getting native windows 7 bio support for my M4400. Downloaded and installed.
No, nothing, nada, shaite. Still no support. This is ugly. Just read online that Dell listens and now you can get Inspiron 10 with Moblin. What about business users that scream for native bio support for latitude and precisions. Dell needs to shape up on this point.
installing Windows XP on my HP Pavillion Dv2100. Windows could load with Native Sata disabled but when I try to enable it, it gives me a BSOD during the Windows loading screen. I tried doing the steps on [url] and it still doesnt work.
I also tried reinstalling Windows with Native Sata enabled but it says Windows cannot detect a hard disk. Tried reinstalling using a Flash Drive with Windows installed using WinToFlash and it said "Ntldr is missing".
this is how you get native support for Read/write for snow leopard running 64-bit kernal.
After a ton of frustration and jumping through hoops, I thought I'd save a few people out there some headaches.
NTFS-3G + Macfuse does not work in snow leopard 64-bit kernal If anyone got it to work I'd like to know how as I have tried everything an it doesn't work.
So here is an even better alternative.
Remember when Snow leopard was supposed to support NTFS natively out of the box? Well it does...kind of. I'm not sure what happened but Apple was working on it, but in the end decided not to activate it. Kinda almost like the ipod touch with the camera.
Before you can do anything, you must completely uninstall NTFS-3G and Macfuse. Heres on how to uninstall.
Q 2.3. How can I uninstall MacFUSE?
A: Launch the Mac OS X System Preferences application and go to the MacFUSE preference pane. Click on the "Remove MacFUSE" button. This will uninstall all MacFUSE components except the preference pane itself.
You can keep the MacFUSE preference pane around should you decide to install MacFUSE again in the future. If you do wish to remove it, you do it just like how you would remove any other non-Apple preference pane: In System Preferences, control-click (right-click) on the MacFUSE icon and you will see "Remove ..." as an action............
i cant make the monitor to work in his native resolution 2560x1600.The best i can get is 1920x1200 with hdmi cable.i have try with hdmi to dvi cable and it give me 1920x1080
- hdmi to hdmi cable 1920x1200
- hdmi to displayport cable - no image at all
I am thinking of buying the IdeaPad Yoga 13 - 59359568 - Silver Grey (specs)
I want to hook up a 24" external monitor to it and use this a my primary monitor (no cloning)
I want it be a t least 1900x1200 but anything higher would be even better.
What's the maximum resolution this laptop can handle to my external monitor?
When I connect second display via regular VGA cable I can set the maximum resolution to 1920x1080, although native resolution for my external screen is 1920x1200.
I could just find posts related to similar problems when using docking station - tried some of the solutions, but none seemed to work.
Found this [URL] ... on dpreview - suggests using miniDP to DP 2-link converter (screen has just VGA/DP ports).
Computer: Lenovo Y580
External Monitor: ASUS PB278q
Intel Adapter: Intel(R) HD Graphics 4000
Driver Version: 8.17.12.9555
I am trying to get 2560x1440 graphics to be broadcast to my external monitor over HDMI
When I try to create a custom resolution in the Graphics Control Panel one of three things happens.
1. I get a message saying that the resolution I am trying to create isn't possible
2. I create the custom resolution, however when I try to adjust it in the Screen Resolution menu Windows tells me that it can't broadcast the resolution.
3. The resolution broadcasts, but it is terrible quality, and looks like it is vibrating.
*Note: I had this setup previously, but I had to reinstall Windows recently, downgrading from Windows 8 to Windows 7, and now I can't get it to work.
I was wondering what the correct resolutions are of the 3 available screens on the customizing page of the Lenovo E540. I can't find it anywhere and I really want them for comparing.
View 1 Replies View Related
