Lenovo X Series ThinkPad :: X120e - Simplest Way To Reinstall OS?
May 17, 2014
I have an x120e that's a few years old, works fine but is slow as mollasses. I want to do a fresh install of the OS, and want to do it in a way that brings the fewest headaches. I see there is a recovery partition but what that is for. I have googled this and seen suggestions but those ways seem to eliminate the built-in Lenovo functionality like the f keys and such.
Any easiest way to reinstall to speed up the machine without having to track down drivers and Lenovo-specific add-ons?
Love this machine, by the way.
View 9 Replies
ADVERTISEMENT
Oct 19, 2012
My x120e has been getting hot ever since I've got it.
Not doing much of anything, it'll be 75-80 degrees C. Full load, 95-99 C.
I've tried replacing the thermal compound, replacing the heatsink, the cpu is undervolted. It still runs quite hot. As I write this, the computer is 97% idle and still at 77 degrees C. It's sitting on a hardwood floor, so the vents on the bottom that I just blew out are clear.
View 9 Replies
View Related
Mar 19, 2011
I ordered my laptop from cdw (will post link when cdw gets finished with their downtime).
On the one I ordered, it said that bluetooth was included. As a general rule I always re-install windows after I get it, and did the same this time because I had a spare copy of windows 7 ultimate. I re-installed all the levono tools and drivers as normal, but when I got to the bluetooth one it said that my laptop did not have bluetooth. So I opened up the computer just enough to verify that the bluetooth daughter card IS there. So whats going on?
View 9 Replies
View Related
Mar 11, 2012
I'm contemplating upgrading from my Samsung 830 128gb to a Samsung 840 EVO 250gb, on my trusted x120e. The EVO has Full Disk Encryption (FDE) and I am curious to know if:
1. Turning on the FDE is done through the BIOS?
2. Do I need to enter the FDE password each time I reboot (like I have to with the hardware passwds?)
3. Is there a performance penalty (finite but negligible perhaps) for turning on the FDE?
4. Is the FDE significantly greater protection (in a practical sense) than just the (non-encrypting) hardware passwd (which nonetheless is quite effective in that the disk isn't recognized at all if used in another pc)?
5. My X120e is an AMD machine and the Samsung Magician software (most recent versions) works only for Intel machines. If the FDE is controlled through that sw, then I have a problem.
View 4 Replies
View Related
May 15, 2014
Recently, my x120e began blue-screening (with error code c000021a) while Windows was starting up. However, if the computer was off for a period of time, usually about 5-10 minutes minimum, it would start up with no problems. I thought it might be overheating except for two things:
1) Once windows started up, I had no issues. No matter how much processing power I was using, it didn't bluescreen or even try to turn itself off
2) When I rebooted in safe mode and looked at what modules it was loading, it always failed after the same one (CLASSPNP.SYS)
I had heard that there were occasionally some significant driver issues with my hardware, so I did a clean re-install of Windows (Win 7 Pro, 64-bit), hoping that this would rule that out.
The issue persisted, and in fact would interfere with a Windows install disk booting into the installer. After I got the installation to complete, the previous issue continued to be present.
I did some Google searching and found that the BSOD error code c000021a is generally caused by a driver or security issue, and the usual solutions suggested are to try to use the "Last Known Good Configuration Option" for windows startup, and to update drivers. However, neither of these things have worked, as it still does this on a fresh Windows install.
I also tried running without the battery (AC power only) and without the AC power (battery only), and neither has fixed the issue.
(Side note: This was originally happening with the original 320GB hard disk that came in the machine. I was going to upgrade to an SSD anyway, and this problem has persisted with the new drive).
View 2 Replies
View Related
Feb 6, 2014
My x120e has been giving me grief recently. It started when, upon awaking the computer, my screen would be very distorted. It was mostly horizontal and was different from the known horizontal screen flicker issue. It would take up large parts of the screen, but no more than half. Now get this, the distortion changed totally depending on what was on the screen. I could even get it to go away completely if I just opened the start menu (with my task bar on the left side of the screen). Typically a restart would alleviate the issue.
I would get a screencap for you guys, but last night I shut down the laptop to 'fix' the issue and the screen never came back on. I can still use an external monitor so I'm not thinking this is a graphics card problem, or at least not entirely.
View 1 Replies
View Related
Mar 29, 2011
I just got the x120e and I already went through and fixed it auto-brightening itself. After I hit the Fn + Home and adjusted it to my preference. It was not on the charger when I did that and I was in a darker room so I had the brightness down lower. Later on in the day, I plugged it in to charge and I went to make it brighter. The brightness is not changing however. All the oher Fn + F keys are working. Just not the two for brightness. The weird thing is, I shut the computer, waited for it to enter sleep mode then opened it up again and it was really bright and I had to pretty much squint, but again the keys were not working to lower it. I closed it again and opened it and it is again dimmer. The keys still aren't working.
View 9 Replies
View Related
Aug 30, 2011
I just upgraded my x120e to windows 8. i can't open my bluetooth, i have already tried FN+ F5. Nothing happend. bluetooth is important for me.
View 6 Replies
View Related
Jan 24, 2011
I have an X120e running Windows 8.1 Pro x64.I just upgraded the unit to 4GB of ram (2x2) from 2GB (1x2). Whenever the upper DIMM slot is used, the system will not leave standby mode, and all power, including the battery has to be removed from the system for it to operate normally again.
Of interest, all of the ram tested good with Memtest86+ if it matters the system has the e350 CPU, and a 320GB HDD.
View 2 Replies
View Related
Jul 21, 2014
For various reasons, I had to perform a complete reinstall of Windows 8.1 on my W530. Now, after updating the system with the Lenovo System Update app, all the icons on the desktop (laptop screen, not external) are considerably larger than before the resintall. This includes the task bar, etc.. as a matter of fact, it appears that I've lost a lot of real estate within apps as well, and everything generally appears to be 'fat'.
I have the screen resolution set to 1920 x 1080.
I am using the Intel HD Graphics 4000 driver dated 5/16/2014.
Interestingly enough, upon first boot from the rebuild (before the System Update updates) the screen was exactly as it was before. I did try to downgrade the driver to the built-in MSFT driver.. but that didn't accomplish anything.
I've attached a screen shot for those bored enough to care : Link to image
View 7 Replies
View Related
Jan 20, 2013
I recently my new Thinkpad T530 and I accidentally uninstalled Power Manager. I re-installed it. Now when ever I log on It says, "RUNDLL: There was a problem starting C:/Program. The specified module could not be found." And whenever I turn on the icon in the taskbar it is gray and has three dashes.
View 9 Replies
View Related
Oct 15, 2012
How to reinstall Windows 7 in U310 ???
View 9 Replies
View Related
Mar 13, 2014
I re-installed my Z570 after Two years. I got "No supported Intel wireless network adaptor found" My Z570 is 1024AYU type, WiFi Link 1000 BGN, Win7 Ultimate 64bit.
All Lenovo drivers were loaded according Lenovo driver matrix (Including PM).
Radio switch is on. Bios wireless is enabled, service WLAN AutoConfig is running in Auto mode.
Fn+F5 shows only Bluetooth, WiFi line is missing.
Under Intel WiFi Link 1000 BGN driver (Device Manager) there is Yellow exclamation mark that stats "This device cannot be started"....
View 4 Replies
View Related
Feb 1, 2014
I was updating some drivers yesterday and I accidentally uninstalled dobly home theater one way or another, and I have been searching the internet far and wide for a download but I could not come across one. When I go into the dolby tab it says I have dolby digital plus, and I can press the blue power button to turn it on, but I cannot select movie, game, or music as they are not there.
View 7 Replies
View Related
Aug 28, 2014
Recently I have had problem doing external monitor calibration under Win 8.1 64-bit. It turned out that that monitor did not show up in the "Device" pull-down menu in the Color Management. So I update the Intel HD graphic 400 driver. It didn't work. Then I uninstall the video driver and re-install from the scratch. Now I have found even the built-in monitor did not show up at the Color Management. Only printers show up in the Device pull-down menu.
I wonder if there other software or driver that I need to install? Or I have mseed up so One-touch Restore will be required?
View 2 Replies
View Related
Oct 5, 2014
i can't boot on an USB key, the secure boot is desabled and when i press enter to boot on the USB key nothing happen. I had tested with 3 different usb key and 2 different OS. And it work on other laptop i have a lenovo twist... i think its in the BIOS but i had check all options
View 2 Replies
View Related
Apr 1, 2014
I turn on my laptap and it start up normally. All are loaded up in the homescreen except the cursor which keeps on loading ( its like when you refresh). All keys are not working except to the CapsLock key, the touchpad and trackpoint ( color red) are working.
I remove the power source and battery to shut it down but it doesn't shut down! Now it is running for 5 minutes, and the screen still ON, continue to refresh. How to shut this down and restart.
View 2 Replies
View Related
Feb 17, 2014
What build in program in New X1 carbon is for optimizing (Maintainance) SSD? I believe the "defragment tool" provided in control panel is no use for optimizing the SSD?
View 2 Replies
View Related
Oct 7, 2014
I have checked the BIOS settings. Intel Hyper-Thread technology is checked as enabled. When I try to turn on Hyper-V Platform in Control Panel, I am told that Virtualization support is disabled in firmware. I see nothing else in the BIOS menu to turn on. What am I missing?
View 7 Replies
View Related
Feb 23, 2014
I have a 3 month old X1 Carbon. Last night i turned it off and suddenly today morning, I find that the device is not powering on. What's the deal? No response at all even after continuosly pressing the power button.
View 5 Replies
View Related
Oct 28, 2009
Can one add a SSD into the ultrabay of the W510?
View 8 Replies
View Related
Dec 24, 2014
I have disabled the secure boot and changed the boot to Legacy Only.It still doesn't work.I have also tried updating my bios to the latest version using the Lenovo Solution Center.
View 3 Replies
View Related
Dec 8, 2014
I have a x60s (t2400, 2gb ram) as a spare laptop (also just because i really like it).i know there are more models and that the cpu is solderd onto the mainboard. if i want a t7200 cpu, can i then just replace the entire mainboard? or does that later model have diffrent cooling wich my t2400 doesnt have?
secondly i hearred the discussion about 2 or 4gbs of ram. if i insert 4gb ram, then i just get 3 a 3.5 gb? and will an t7200 allow me to have more ram?and last is more an software issue; i use fingerprint to logon to windows 7 (home premium). is there a way i can set windows to only use fingerprint log on? (so you cant select other logon options).
View 5 Replies
View Related
Sep 7, 2014
My new W540 has the latest bios & software updates. It won't wake up from sleep...or rather the display won't come on. When I push the power button (pulsing green), it goes to solid green and the fingerprint scanner light turns on, but no screen. I scan my fingerprint and the scanner light turns off, but still no screen. The only way to bring it back to life is a long press on the power button and a reboot.
Nothing plugged into any of the ports. It does this regardless of whether it's plugged in or on battery.
View 9 Replies
View Related
Apr 1, 2014
How do to use SIM Card here in X240? My company laptop have simcard tray, but i dont know how does it works.
View 3 Replies
View Related
Aug 27, 2013
My X1 is about 18 months old. It was fine until today. The battery was low, so I plugged it in. The little blue light where the power connects illuminated, however the battery indicater in Windows did not change to show "charging", and the battery continued to drain.
Over the next hour or so I tried many things like shutting down, waiting, new A/C outlet, new power settings, etc. Tried the little reset hole on the bottom of the laptop. Nothing mattered... the little blue light is on, but the battery just drains.
Eventually, the battery drained and the X1 shut down. When I try to boot, I get a pre-boot message about a critical low power error, even plugged in, so my laptop is now a brick.This is a 3448-34U Thinkpad Carbon X1.
View 3 Replies
View Related
Dec 3, 2014
I am trying to do a clean install on my good, old Thinkpad X230 which came with 64-bit Windows 7 Professional. For some reason, I was not able to create a bootable media from the recovery partition. In any case, I wanted to avoid the recovery partition as I want a basic, non-bloated, and minimal install.
Hence, I downloaded a copy of 64-bit Windows 7 Professional from Microsoft/ digital river website. After performing the checksum, I used Microsoft's USB DVD Download Tool to make a bootable USB on Kingston Flash Voyager (USB 2.0; 8 GB; FAT32). BTW, just for the heck of it, I verified that it boots on my spare (and even older) Thinkpad X60 -- though it doesn't proceed when it sees that the X60 has a 32-bit microprocessor.
The relevant BIOS values and settings are as follows:
UEFI BIOS Version G2ET95WW (2.55)
UEFI BIOS Date 2013-July-09
UEFI Secure Boot Off
[URL] ....
I am posting this query after trying a number of solutions : rebooting from a USB flash drive on my Thinkpad X230. For some reason, nothing has worked and pressing F12 only shows the ATA HDD0 hard drive. Among other things, I have tried the following:
- Updated the Intel USB 3.0 eXtensible Host Controller driver using Lenovo's Thinkvantage Tools. Now it has version 1.0.9.254. Someone suggested to have at least 1.4.0.225 which is apparently available at Intel's website. I always considered downloading the device drivers from Lenovo to be kosher. Shall I download it from Intel's website?
- Disabled USB 3.0 from BIOS which made all USB ports to act as USB 2.0. Neither option works.
- Tried booting from all three USB ports (of which one is USB 2.0 and two are USB 3.0). Zilch.
- Have yet to try "reset BIOS to default" suggestion as it looked a bit of a last resort.
View 7 Replies
View Related
Jul 10, 2014
How to boot from a Lenovo recovery disk for Windows 7 on a USB driven DVD drive? The laptop is currently running Linux so can't run from within the operating system. The BIOS utility doesn't recognise the drive no matter what I select in the boot menu (USB CD, USB FDD or USB HDD) and the F12 boot utility also doesn't recognise the drive. Incidently, F12 does recognise the Linux USB drive so I know this works. The external drive is a Leicke DVD R/RW DVD.
The reason for wanting to boot from the Windows 7 recivery drive is to reinstall Win 7 on a new install, dual boot Linux (Mint), then install iTunes on WIn 7so I can sync my iPhone, and run everything else under Linux. I've tried using a Win emulator under Linux but unsuccessfully.
View 2 Replies
View Related
Jan 15, 2013
I just bought an X61 on ebay and installed Mint Linux, VirtualBox and the Win8.1 preview.
All was going well, except that the heat worried me. The fan was going, but no air seemed to be coming out, so I followed the service manual and dismantled the whole machine. The area between the fan and the heatsink vanes was completely clogged with oily dust and felt, so I cleaned everything, lubricated the fan and re-assembled the machine.
Now it will not turn on. No lights, nothing. I have checked all the internal connectors and all seem fine. I've done this sort of thing often in the past, although not in an X61.
The one problem that I encountered was that the keyboard bezel was glued to the case bottom near the LH hinge and in prising the glue apart, I had to break a small piece out of the bezel at the back, and I have reassembled it with a slightly loose rear part of the bezel.
So, my question is whether there is some sort of tiny switch in the video cable going up to the screen, and does this have to be accurately positioned wrt the bezel? Also, if I try to glue the bezel back together, would epoxy work with the bezel plastic or is there a better glue?
View 8 Replies
View Related
Aug 1, 2011
I'm having a bit of a strange problem with my Thinkpad X201.
I've been running Windows 7 Pro on it for almost a year without any problems at all, but the SSD I installed developed a fault and had to be replaced. I have the original Win 7 Pro DVD and have installed it from scratch on the new SSD but a few problems have come up.
W7 couldn't find any drivers for the network card or wireless card, and without a network connection it couldn't go online to find any - luckily I was able to download a network card driver via my desktop pc which I then installed on the X201, and when the Windows updates were downloaded and installed, the wireless also started working too.
However, the on-screen displays for the volume, brightness and Caps Lock functions don't work and neither does the Fn-F5 for wireless and Bluetooth.
I spent all of yesterday evening hunting various forums and downloading numerous drivers etc, but I still can't get the OSD to work.
I've tried Lenovo's System Update which downloaded some things and have also tried using the Intel video drivers etc but am totally lost now as to what to do next.
I know that the OSDs do work as they were all working perfectly on the original W7 install, I just don't know what the problem is now with this clean install.
View 4 Replies
View Related
