Lenovo X120e X Series ThinkPad :: Bluescreen On Windows Startup?
May 15, 2014
Recently, my x120e began blue-screening (with error code c000021a) while Windows was starting up. However, if the computer was off for a period of time, usually about 5-10 minutes minimum, it would start up with no problems. I thought it might be overheating except for two things:
1) Once windows started up, I had no issues. No matter how much processing power I was using, it didn't bluescreen or even try to turn itself off
2) When I rebooted in safe mode and looked at what modules it was loading, it always failed after the same one (CLASSPNP.SYS)
I had heard that there were occasionally some significant driver issues with my hardware, so I did a clean re-install of Windows (Win 7 Pro, 64-bit), hoping that this would rule that out.
The issue persisted, and in fact would interfere with a Windows install disk booting into the installer. After I got the installation to complete, the previous issue continued to be present.
I did some Google searching and found that the BSOD error code c000021a is generally caused by a driver or security issue, and the usual solutions suggested are to try to use the "Last Known Good Configuration Option" for windows startup, and to update drivers. However, neither of these things have worked, as it still does this on a fresh Windows install.
I also tried running without the battery (AC power only) and without the AC power (battery only), and neither has fixed the issue.
(Side note: This was originally happening with the original 320GB hard disk that came in the machine. I was going to upgrade to an SSD anyway, and this problem has persisted with the new drive).
View 2 Replies
ADVERTISEMENT
Aug 30, 2011
I just upgraded my x120e to windows 8. i can't open my bluetooth, i have already tried FN+ F5. Nothing happend. bluetooth is important for me.
View 6 Replies
View Related
Oct 19, 2012
My x120e has been getting hot ever since I've got it.
Not doing much of anything, it'll be 75-80 degrees C. Full load, 95-99 C.
I've tried replacing the thermal compound, replacing the heatsink, the cpu is undervolted. It still runs quite hot. As I write this, the computer is 97% idle and still at 77 degrees C. It's sitting on a hardwood floor, so the vents on the bottom that I just blew out are clear.
View 9 Replies
View Related
May 17, 2014
I have an x120e that's a few years old, works fine but is slow as mollasses. I want to do a fresh install of the OS, and want to do it in a way that brings the fewest headaches. I see there is a recovery partition but what that is for. I have googled this and seen suggestions but those ways seem to eliminate the built-in Lenovo functionality like the f keys and such.
Any easiest way to reinstall to speed up the machine without having to track down drivers and Lenovo-specific add-ons?
Love this machine, by the way.
View 9 Replies
View Related
Mar 19, 2011
I ordered my laptop from cdw (will post link when cdw gets finished with their downtime).
On the one I ordered, it said that bluetooth was included. As a general rule I always re-install windows after I get it, and did the same this time because I had a spare copy of windows 7 ultimate. I re-installed all the levono tools and drivers as normal, but when I got to the bluetooth one it said that my laptop did not have bluetooth. So I opened up the computer just enough to verify that the bluetooth daughter card IS there. So whats going on?
View 9 Replies
View Related
Mar 11, 2012
I'm contemplating upgrading from my Samsung 830 128gb to a Samsung 840 EVO 250gb, on my trusted x120e. The EVO has Full Disk Encryption (FDE) and I am curious to know if:
1. Turning on the FDE is done through the BIOS?
2. Do I need to enter the FDE password each time I reboot (like I have to with the hardware passwds?)
3. Is there a performance penalty (finite but negligible perhaps) for turning on the FDE?
4. Is the FDE significantly greater protection (in a practical sense) than just the (non-encrypting) hardware passwd (which nonetheless is quite effective in that the disk isn't recognized at all if used in another pc)?
5. My X120e is an AMD machine and the Samsung Magician software (most recent versions) works only for Intel machines. If the FDE is controlled through that sw, then I have a problem.
View 4 Replies
View Related
Feb 6, 2014
My x120e has been giving me grief recently. It started when, upon awaking the computer, my screen would be very distorted. It was mostly horizontal and was different from the known horizontal screen flicker issue. It would take up large parts of the screen, but no more than half. Now get this, the distortion changed totally depending on what was on the screen. I could even get it to go away completely if I just opened the start menu (with my task bar on the left side of the screen). Typically a restart would alleviate the issue.
I would get a screencap for you guys, but last night I shut down the laptop to 'fix' the issue and the screen never came back on. I can still use an external monitor so I'm not thinking this is a graphics card problem, or at least not entirely.
View 1 Replies
View Related
Mar 29, 2011
I just got the x120e and I already went through and fixed it auto-brightening itself. After I hit the Fn + Home and adjusted it to my preference. It was not on the charger when I did that and I was in a darker room so I had the brightness down lower. Later on in the day, I plugged it in to charge and I went to make it brighter. The brightness is not changing however. All the oher Fn + F keys are working. Just not the two for brightness. The weird thing is, I shut the computer, waited for it to enter sleep mode then opened it up again and it was really bright and I had to pretty much squint, but again the keys were not working to lower it. I closed it again and opened it and it is again dimmer. The keys still aren't working.
View 9 Replies
View Related
Jan 24, 2011
I have an X120e running Windows 8.1 Pro x64.I just upgraded the unit to 4GB of ram (2x2) from 2GB (1x2). Whenever the upper DIMM slot is used, the system will not leave standby mode, and all power, including the battery has to be removed from the system for it to operate normally again.
Of interest, all of the ram tested good with Memtest86+ if it matters the system has the e350 CPU, and a 320GB HDD.
View 2 Replies
View Related
Nov 21, 2014
Having some troubles with my X220 and windows 8.1 and fast startup.
It has been working flawlessly for a few months now with Windows 8 and an SSD but has recently decided it does not want to fast startup - every time I try and boot with the feature enabled the laptop immediately shuts off completely after the boot animation. On pressing the power button again the laptop boots 'normally' i.e. at 'normal' startup speed.
I've tried disabling the feature, using the 'powercfg -h off' and 'powercfg -h on' commands to recreate hiberfil.sys and enabling it again, which worked at first but now it has started having the problem again and this no longer works.
ThinkPad X220i - first ThinkPad and won't be the last
View 3 Replies
View Related
Aug 26, 2010
My X200 laptop appears to have a mistake in its keyboard. When the machine is starting up, I see the following message right after the Bios screen:
Error
0210
Stuck key 5D
Press F1 to setup
And also when I am using it, the computer sometimes show the thing like when we click on right button of the mice, even I do not touch the laptop.
When I replace other keyboard ( from other X200), the laptop work perfectly.
View 7 Replies
View Related
Jun 24, 2013
My W530 displays the "To interrupt normal startup, press Enter" message on startup. If I press Enter, I hear a beep and a message comes up indicating that a menu will be displayed, but Windows 8 starts loading shortly afterwards.
When I see the message, I can press F1 to get to the BIOS, F10 for Diagnostics or F12 for a Boot menu, but for some reason enter doesn't work.
I've tried several things, including using Recovery DVDs received from Lenovo to wipe the system (including formatting all drives), but still no luck.
When I originally received the machine, the "enter" key would bring up a menu, but I have screwed something up and even a full recovery from Lenovo DVDs didn't work. I run Windows 8 and after receiving the machine used the Create System Image feature (which I had used many times in Windows 7), but a subsequent restore didn't go well and that is when the "enter" stopped working on startup.
View 1 Replies
View Related
Feb 12, 2014
I have a X1 Carbon 3443CTO and it's running fine.Last night everything was ok and I went into the BIOS and changed AHCI to compatibility (don't ask me why, I was doing some testing), then I went "Exit and Save Changes" (at the last page of BIOS). As soon as I press Enter the screen freezed there (as opposed to reboot)Since it hangs there I hold the power button and it shutdown.Then I power it up again, but now, here is the problem:
1) The computer turns ON, keyboard backlight flash on for a second (normal)
2) Screen stays blank (no, it's not the backlight faulty)
3) power light turns ON (normal)
4) no sign of activities pressing any buttons, no beep sound
View 7 Replies
View Related
Jul 28, 2014
The Windows startup music doesn't play on my laptop G580 (my OS is Windows 8.1). It only plays when I reboot my machine.
What's the problem? I enabled the startup music (put a tick).
View 8 Replies
View Related
Feb 16, 2013
So, as soon as BIOS page passed, Windows logo appears and the circle below circling.
After 10 seconds it crashes and restarts automatically.
New machine. BIOS has been reset to default multiple times.
View 2 Replies
View Related
Dec 8, 2014
I have a x60s (t2400, 2gb ram) as a spare laptop (also just because i really like it).i know there are more models and that the cpu is solderd onto the mainboard. if i want a t7200 cpu, can i then just replace the entire mainboard? or does that later model have diffrent cooling wich my t2400 doesnt have?
secondly i hearred the discussion about 2 or 4gbs of ram. if i insert 4gb ram, then i just get 3 a 3.5 gb? and will an t7200 allow me to have more ram?and last is more an software issue; i use fingerprint to logon to windows 7 (home premium). is there a way i can set windows to only use fingerprint log on? (so you cant select other logon options).
View 5 Replies
View Related
Aug 1, 2011
I'm having a bit of a strange problem with my Thinkpad X201.
I've been running Windows 7 Pro on it for almost a year without any problems at all, but the SSD I installed developed a fault and had to be replaced. I have the original Win 7 Pro DVD and have installed it from scratch on the new SSD but a few problems have come up.
W7 couldn't find any drivers for the network card or wireless card, and without a network connection it couldn't go online to find any - luckily I was able to download a network card driver via my desktop pc which I then installed on the X201, and when the Windows updates were downloaded and installed, the wireless also started working too.
However, the on-screen displays for the volume, brightness and Caps Lock functions don't work and neither does the Fn-F5 for wireless and Bluetooth.
I spent all of yesterday evening hunting various forums and downloading numerous drivers etc, but I still can't get the OSD to work.
I've tried Lenovo's System Update which downloaded some things and have also tried using the Intel video drivers etc but am totally lost now as to what to do next.
I know that the OSDs do work as they were all working perfectly on the original W7 install, I just don't know what the problem is now with this clean install.
View 4 Replies
View Related
Feb 23, 2013
I'm running a Windows 8 Pro 64bit on my Thinkpad X200s. What is the absolute more ram usable and recognized by the laptop?
View 9 Replies
View Related
Oct 2, 2014
Just received my x240 - everything is working as expected. However, I keep getting a notification to activate my windows?
It came preloaded with windows 8 and is currently activated - but states that it will expire in November. Whenever I try and activate it I receive this..
Did a clean boot and updated everything but still occurs.
View 3 Replies
View Related
Sep 25, 2014
I am trying to install windows 8 from the 3 disks that came with the X1 Carbon. There is no DVD drive and we have no external disk drive, so I need to create a bootable USB for this. The laptop came with windows 7 on it.
It is easy to use DISKPART to ready the USB as a bootable device, but how to I take the data from the 3 DVDs and put it onto the USB so that it works? The first one only has drivers but the OS install is split onto two disks. I referred to a KB article but it was talking about autorun files that are not present on these DVDs.
The DVDs I have are labeled as
(1) Applications and Drivers Recovery Disk,
(2) OS Recovery Disk Windows 8 Pro [Disk 1 of 2], and (2) OS Recovery Disk Windows 8 Pro [Disk 2 of 2].
View 3 Replies
View Related
Sep 9, 2014
I just got a few weeks used thinkpad x230 which has w7 professional. I am thinking of an upgrade to w8.1 but not sure what to expect after the upgrade.
View 4 Replies
View Related
Jul 14, 2014
We bought 12 X240 pc's and installed a Windows 7 64bit OS on them. We are having problems on several laptop (5 so far) that they freeze several times a day. The mouse icon changes in the processing icon, you can still move your mouse but can't click anything or even press ctrl + alt + del. Have to long press the power key to get them to power off.
I already read that there were problems with the fingerprint reader software, uninstalled it but still having the problems (fingerprint reader is disabled in BIOS). Also upgraded the fingerprint reader software to the latest version on another pc, but same problem.
Ran solution center on one of the PC's, didn't find any problems. Ran system update and updated all to the latest version. Also tried to change the power settings to Performance mode in windows. But problem keeps coming back.
I tried installing the latest Intel graphics driver, but it fails to start stating that you need a version from the manufacturer. No error messages in the windows event logs.
X240 model is 20AL00C1MB.
View 8 Replies
View Related
Oct 8, 2014
I have a Lenovo Thinkpad R61li 15.4" screen laptop. It's important that I keep this computer in service with the Win XP Pro Sp 3 because I have two vital programs which will not install on Win 8.
This computer has never had a "A: Floppy dirve" and only a CD drive but the installation options for making a Boot Disk/ Start-up Disk only consider a Floppy drive and not a CD drive. I need to make a Boot/Start-up disk on a CD so that if I get locked out of my computer AGAIN, I can boot back into Windows and then either fix the problems or restore from my current backups.
I have two new sets of Rescue Disks but they don't boot into the current OS so that I can access my backups. And if I can't access Safe Mode or do a repair, I'm stuck with the problem of having to reinstall an old version of XP, which is then not compatible with my backups because the backups have new Windows files from all the upgrades.
How can I make a Boot Disk/Start-up Disk like we used to use in the "old days" to start the initial system files and boot into Windows so that I can either make repairs to restore from my backups using current Winows files?
View 2 Replies
View Related
Dec 13, 2014
Some texts look blurry on some windows. I have attached a picture to show you what I mean. If you see "Device Manager" window, the text is blurry. On the other "System" window, the text is just fine.
Link to image...
View 1 Replies
View Related
Nov 8, 2014
I have S430, bios 2.58 I decided to upgrade my HDD to SSD and install clean Windows on it.
I've downloaded Windows 7 ISO from [URL] ....
Then I have loaded it into Windows 7 USB DVD Download Tool
Prepared with that app bootable DVD and flash
First I tryied to install Windows from usb, installer runs and asked me for CDDVD drivers. I sat up USB3.0 to disabled, then in browser window I can see my flash, but the message about drivers remains..
Also I copyed USB3 driver from [URL] ... to another flash and tryed to give them instead of CD-DVD drivers, but they are shown as "not compatible"
Next i tryied with DVD, but I can't even load installer - DVD begin to roll, but then shows me "choose boot device" dialog. Secure boot is OFF, UEFI tryied both Legacy Only and UEFI only....
View 2 Replies
View Related
Nov 19, 2014
I've just bought thinkpad s540 with 1tb hdd and win8. Tomorrow i'll get m.2 128gb ssd and i'm planning to tranfer windows on it. I did nothing with OS, recovery partition is on it's place.
What should i do after replacing ssd cache with new ssd drive, step-by-step?
View 3 Replies
View Related
Dec 22, 2012
I bought my W530 with Windows 7 preinstalled and an option to upgrade to Windows 8, which I did immediately before installing any programs. When I now try to upgrade to Windows 8.1 I get a message asking me to previously uninstall RapidBoot. However I cannot find RapidBoot on this machine. How can I uninstall it?
View 6 Replies
View Related
Dec 20, 2013
Basically I am trying to install a new Samsung SSD into a W530, however, I can not get the Bios or Windows instalation to see it (when you select what drive you want to install windows on).
I can externally attach the SSD to my other laptop and see the drive. I can create partitions, format them, etc. But none of that worked my original issue.
I have also updated to the latest BIOS version, tried turning off UEFI, no luck.
What I am missing here to get this SSD to show up?
View 2 Replies
View Related
Dec 26, 2013
x200 fingerprint not working in windows 8.1 x64.
I can not find the x200 fingerprint driver in windows 8.1 x64.
the autentec web can't open now.
[URL]
View 9 Replies
View Related
Dec 18, 2012
After receiving my w530, I wiped the drive and installed a nice fresh copy of Windows 8 Enterprise (volume licence work copy).
I have installed all the latest drivers, etc. and taken note of the various documents about Windows 8 upgrade/install, but cannot make use of the integrated camera?!
The driver is listed under the device manager:
Imagine Devices -> Integrated Camera (Ricoh 1.0.0.19) - BTW I tried the beta one to see if that worked, and it made no difference to I rolled back to the proper release again.
The docs I have read said NOT to install the Communications Utility, and at this point in time there is not a Windows 8 listed compatible version of that. I did give it a try when the camera did not work, but although there were no errors, etc. it didn't work either ...
Skype/messenger/windows 8 camera seem to know it's there, but cannot make use of it (I get the placeholder image).
Under Control Panel->Hardware and Sound, there is no appropriate entry for me to toggle/configure.
I see the green light come on, but no picture. Running latest bios G5ET65WW (2.07).
View 9 Replies
View Related