Lenovo X Series ThinkPad :: X201 - No OSD With Windows 7 Pro
Aug 1, 2011
I'm having a bit of a strange problem with my Thinkpad X201.
I've been running Windows 7 Pro on it for almost a year without any problems at all, but the SSD I installed developed a fault and had to be replaced. I have the original Win 7 Pro DVD and have installed it from scratch on the new SSD but a few problems have come up.
W7 couldn't find any drivers for the network card or wireless card, and without a network connection it couldn't go online to find any - luckily I was able to download a network card driver via my desktop pc which I then installed on the X201, and when the Windows updates were downloaded and installed, the wireless also started working too.
However, the on-screen displays for the volume, brightness and Caps Lock functions don't work and neither does the Fn-F5 for wireless and Bluetooth.
I spent all of yesterday evening hunting various forums and downloading numerous drivers etc, but I still can't get the OSD to work.
I've tried Lenovo's System Update which downloaded some things and have also tried using the Intel video drivers etc but am totally lost now as to what to do next.
I know that the OSDs do work as they were all working perfectly on the original W7 install, I just don't know what the problem is now with this clean install.
View 4 Replies
ADVERTISEMENT
Aug 20, 2014
I have tried in Windows 7 64bit and 8 64bit and have had no luck.
I have googled all over and found some hints on this forum to try installing Communication Manager, but it does not solve anything. It's like the camera is not seen.
I know the camera is not broken or disconnected because LINUX of all things can see it and use it.
On the X201 page there are no drivers for the camera at all, only the communication manager install. For Win 8 it is listed that the drivers are built into Windows 8, but as far as I can tell this is not the case, unless i am doing something wrong?
How to get working webcam with X201 at all in Windows?
View 5 Replies
View Related
Jul 15, 2014
Can i disable battery charging on thinkpad x201, so i don't need to pull out my battery every time? Because although my battery stop charging when it is fully charged i don't want to use battery as power sourse after that.
View 6 Replies
View Related
Apr 12, 2014
Does 3680-VH5 has 3G modem inside?
View 9 Replies
View Related
May 8, 2014
I use my X201 for 4 years now without any trouble. The original battery getting worned out, I replaced it with a 9Cell Duracell (Sanyo) one.
Since then and only when I use the new battery, AC unplugged, my laptop randomly shuts down with no warning. No overheating issue.
The Win7 logs point to powerfailure (Kernel Power at restart shows error 61)
View 6 Replies
View Related
Jun 1, 2010
I recently purchased a new x201 and noticed that one of my three USB ports is colored with yellow plastic (like the yellow surrounding the power plug). What this special coloring indicates? I can't find any literature explaining the port's special color...
View 8 Replies
View Related
Mar 16, 2009
I found a trojan that is attached to skype.exe. I have tried to start in safe mode pressing F8 on start up but I am not able to access safe mode start up. x201....3249-CTO....i7....4GB RAM....64-bit OS....Windows 7
View 9 Replies
View Related
Oct 9, 2014
I have a Lenovo Thinkpad x201 laptop and I cannot get the integrated camera to turn on independent from Skype. It definitely works, I have used it several times with Skype, but I can't figure out how to turn it on outside of Skype. I have tried the Fn+Esc and the Fn+F6 things, and quite frankly I'm not even sure if it applies to x201 laptops, but its definitely not working for mine. My laptop is refurbished and i just got it recently.
View 3 Replies
View Related
Nov 25, 2008
When I click on Hidden Icons, and then Safely Remove Hardware icon, the list of hardware is very slow to appear (but once I select a device, it functions quickly). Compared to how fast my x200 works, the X201 is very slow.
X240 20AL-00D7US, i7 8GB Win8.1 Pro 64, 512 SSD, Ultradock | X201 3249-CTO, i7 8GB Win7 Ult 64 Vertex 2 UltraBase | Twist S230u 3347-XF7, i7 8GB 120GB SSD, Win8 Pro | X120e 0596-CTO E350 4GB Win7 Ult 64 Vertex 2 SSD | X200 | T61 | T42 | X31 | T30
View 9 Replies
View Related
Oct 27, 2014
Okay so i probaly have the weirdest problem ever with this laptop, so the issue started when the display stopped working properly and would only work at a certain angle or when u would apply slight pressure on a certain part of the screen, faulty monitor correct?wrong. When i uninstalled the intel gpu drivers and reverted back to the standard microsoft display adapter all these problems disappeared, screen would work at all angles and the display would have no issues, so that sums out the possibility of the monitor being faulty. The display starts having these issues everytime the intel display drivers are installed, it just blows my mind how this is even a thing. The screen flickers twice and turns off after windows is done booting when the intel drivers are installed and works perfectly without them.
View 9 Replies
View Related
Jul 12, 2010
I have a x201 cto using 64bits Win 7. The wireless adapter is intel advanced-N 6200. However, I found my wireless always turn off suddenly and I can not turn it on anymore (even using Fn+F5) until reboot.
View 9 Replies
View Related
Dec 8, 2014
I have a x60s (t2400, 2gb ram) as a spare laptop (also just because i really like it).i know there are more models and that the cpu is solderd onto the mainboard. if i want a t7200 cpu, can i then just replace the entire mainboard? or does that later model have diffrent cooling wich my t2400 doesnt have?
secondly i hearred the discussion about 2 or 4gbs of ram. if i insert 4gb ram, then i just get 3 a 3.5 gb? and will an t7200 allow me to have more ram?and last is more an software issue; i use fingerprint to logon to windows 7 (home premium). is there a way i can set windows to only use fingerprint log on? (so you cant select other logon options).
View 5 Replies
View Related
Feb 23, 2013
I'm running a Windows 8 Pro 64bit on my Thinkpad X200s. What is the absolute more ram usable and recognized by the laptop?
View 9 Replies
View Related
Oct 2, 2014
Just received my x240 - everything is working as expected. However, I keep getting a notification to activate my windows?
It came preloaded with windows 8 and is currently activated - but states that it will expire in November. Whenever I try and activate it I receive this..
Did a clean boot and updated everything but still occurs.
View 3 Replies
View Related
Sep 25, 2014
I am trying to install windows 8 from the 3 disks that came with the X1 Carbon. There is no DVD drive and we have no external disk drive, so I need to create a bootable USB for this. The laptop came with windows 7 on it.
It is easy to use DISKPART to ready the USB as a bootable device, but how to I take the data from the 3 DVDs and put it onto the USB so that it works? The first one only has drivers but the OS install is split onto two disks. I referred to a KB article but it was talking about autorun files that are not present on these DVDs.
The DVDs I have are labeled as
(1) Applications and Drivers Recovery Disk,
(2) OS Recovery Disk Windows 8 Pro [Disk 1 of 2], and (2) OS Recovery Disk Windows 8 Pro [Disk 2 of 2].
View 3 Replies
View Related
Sep 9, 2014
I just got a few weeks used thinkpad x230 which has w7 professional. I am thinking of an upgrade to w8.1 but not sure what to expect after the upgrade.
View 4 Replies
View Related
Jul 14, 2014
We bought 12 X240 pc's and installed a Windows 7 64bit OS on them. We are having problems on several laptop (5 so far) that they freeze several times a day. The mouse icon changes in the processing icon, you can still move your mouse but can't click anything or even press ctrl + alt + del. Have to long press the power key to get them to power off.
I already read that there were problems with the fingerprint reader software, uninstalled it but still having the problems (fingerprint reader is disabled in BIOS). Also upgraded the fingerprint reader software to the latest version on another pc, but same problem.
Ran solution center on one of the PC's, didn't find any problems. Ran system update and updated all to the latest version. Also tried to change the power settings to Performance mode in windows. But problem keeps coming back.
I tried installing the latest Intel graphics driver, but it fails to start stating that you need a version from the manufacturer. No error messages in the windows event logs.
X240 model is 20AL00C1MB.
View 8 Replies
View Related
Dec 13, 2014
Some texts look blurry on some windows. I have attached a picture to show you what I mean. If you see "Device Manager" window, the text is blurry. On the other "System" window, the text is just fine.
Link to image...
View 1 Replies
View Related
Nov 8, 2014
I have S430, bios 2.58 I decided to upgrade my HDD to SSD and install clean Windows on it.
I've downloaded Windows 7 ISO from [URL] ....
Then I have loaded it into Windows 7 USB DVD Download Tool
Prepared with that app bootable DVD and flash
First I tryied to install Windows from usb, installer runs and asked me for CDDVD drivers. I sat up USB3.0 to disabled, then in browser window I can see my flash, but the message about drivers remains..
Also I copyed USB3 driver from [URL] ... to another flash and tryed to give them instead of CD-DVD drivers, but they are shown as "not compatible"
Next i tryied with DVD, but I can't even load installer - DVD begin to roll, but then shows me "choose boot device" dialog. Secure boot is OFF, UEFI tryied both Legacy Only and UEFI only....
View 2 Replies
View Related
Nov 19, 2014
I've just bought thinkpad s540 with 1tb hdd and win8. Tomorrow i'll get m.2 128gb ssd and i'm planning to tranfer windows on it. I did nothing with OS, recovery partition is on it's place.
What should i do after replacing ssd cache with new ssd drive, step-by-step?
View 3 Replies
View Related
Dec 22, 2012
I bought my W530 with Windows 7 preinstalled and an option to upgrade to Windows 8, which I did immediately before installing any programs. When I now try to upgrade to Windows 8.1 I get a message asking me to previously uninstall RapidBoot. However I cannot find RapidBoot on this machine. How can I uninstall it?
View 6 Replies
View Related
Dec 20, 2013
Basically I am trying to install a new Samsung SSD into a W530, however, I can not get the Bios or Windows instalation to see it (when you select what drive you want to install windows on).
I can externally attach the SSD to my other laptop and see the drive. I can create partitions, format them, etc. But none of that worked my original issue.
I have also updated to the latest BIOS version, tried turning off UEFI, no luck.
What I am missing here to get this SSD to show up?
View 2 Replies
View Related
Nov 21, 2014
Having some troubles with my X220 and windows 8.1 and fast startup.
It has been working flawlessly for a few months now with Windows 8 and an SSD but has recently decided it does not want to fast startup - every time I try and boot with the feature enabled the laptop immediately shuts off completely after the boot animation. On pressing the power button again the laptop boots 'normally' i.e. at 'normal' startup speed.
I've tried disabling the feature, using the 'powercfg -h off' and 'powercfg -h on' commands to recreate hiberfil.sys and enabling it again, which worked at first but now it has started having the problem again and this no longer works.
ThinkPad X220i - first ThinkPad and won't be the last
View 3 Replies
View Related
Dec 26, 2013
x200 fingerprint not working in windows 8.1 x64.
I can not find the x200 fingerprint driver in windows 8.1 x64.
the autentec web can't open now.
[URL]
View 9 Replies
View Related
May 15, 2014
Recently, my x120e began blue-screening (with error code c000021a) while Windows was starting up. However, if the computer was off for a period of time, usually about 5-10 minutes minimum, it would start up with no problems. I thought it might be overheating except for two things:
1) Once windows started up, I had no issues. No matter how much processing power I was using, it didn't bluescreen or even try to turn itself off
2) When I rebooted in safe mode and looked at what modules it was loading, it always failed after the same one (CLASSPNP.SYS)
I had heard that there were occasionally some significant driver issues with my hardware, so I did a clean re-install of Windows (Win 7 Pro, 64-bit), hoping that this would rule that out.
The issue persisted, and in fact would interfere with a Windows install disk booting into the installer. After I got the installation to complete, the previous issue continued to be present.
I did some Google searching and found that the BSOD error code c000021a is generally caused by a driver or security issue, and the usual solutions suggested are to try to use the "Last Known Good Configuration Option" for windows startup, and to update drivers. However, neither of these things have worked, as it still does this on a fresh Windows install.
I also tried running without the battery (AC power only) and without the AC power (battery only), and neither has fixed the issue.
(Side note: This was originally happening with the original 320GB hard disk that came in the machine. I was going to upgrade to an SSD anyway, and this problem has persisted with the new drive).
View 2 Replies
View Related
Dec 18, 2012
After receiving my w530, I wiped the drive and installed a nice fresh copy of Windows 8 Enterprise (volume licence work copy).
I have installed all the latest drivers, etc. and taken note of the various documents about Windows 8 upgrade/install, but cannot make use of the integrated camera?!
The driver is listed under the device manager:
Imagine Devices -> Integrated Camera (Ricoh 1.0.0.19) - BTW I tried the beta one to see if that worked, and it made no difference to I rolled back to the proper release again.
The docs I have read said NOT to install the Communications Utility, and at this point in time there is not a Windows 8 listed compatible version of that. I did give it a try when the camera did not work, but although there were no errors, etc. it didn't work either ...
Skype/messenger/windows 8 camera seem to know it's there, but cannot make use of it (I get the placeholder image).
Under Control Panel->Hardware and Sound, there is no appropriate entry for me to toggle/configure.
I see the green light come on, but no picture. Running latest bios G5ET65WW (2.07).
View 9 Replies
View Related
Aug 7, 2014
I just got my X1 Carbon with touch screen preinstalled with WIndows 8.1.
Wonderful machine, but I hate Windows 8. I can say a lot about that, but let's just state tha fact that I'm not compatible with Windows 8.
Can I install Windows 7 intead? If so, how? Since there's no DVD drive in the system.
And if I install Windows 7, will I lose touch funtionality? WIll I lose other things? (apart from things in Windows 8 of course)
View 2 Replies
View Related
Oct 30, 2014
I got my W540 recently with windows 8.1 pro on it. but as all engineers worst nightmare windows 8 has hard time with engineering softwares (for my case TIA Portal for PLC programming software which only support windows 7). so i need to have a windows 7. i prefer to keep my windows 8 and have dual boot system with windows 7 added. But i can't install windows 7. initially due to disk type (GPT), then i changed it to MBR without losing my files (which only was possible if i had deleted the recovery partition- now my recovery is on my flash drive). But there are already 4 partitions on the system (1 for C: drive and 3 for recovery and system files which came originally with the product) , how can i install a windows 7? i can't add another partition because that makes my disk a Dynamic disk. i really need windows 7 on my system ASAP.
View 9 Replies
View Related
Feb 5, 2014
it appears my windows 7 32bit thinkpad x200 has question marks at bluetooth adapters in device manager.
I have installed the drivers that are available on the website of lenovo producer, but no change is observable.
The device seems to work well, that is share and access files with android smartphone, and use android's internet, but when it comes to sharing internet with the smartphone, there is no transmission. I wonder if broken drivers could be the cause.
View 7 Replies
View Related
Nov 5, 2010
I've had this continual problem with my W520, which I can't seem to solve. Windows Search is disabled, I go into services, set it back to Automatic and start the service. It works fine all day long, no problems. When I shut off the machine, sometimes, not everytime, when I bring the machine back up, the service is now disabled and I go through this entire process again. What is strange is that at other times, after reboot, it is still enabled.
I've checked the event log, there is only an entry that indicates that the service was disabled, but there is no information in there which indicates the process that did the disable.
Here are the specs of the machine which might be relevant:
Hardware
W520
x64 Win7 Ultimate - standard Windows build
2820QM processor
16 GB RAM
1x500 GB drive in the HDD bay
1x750 GB drive in the Ultrabay (with the annoying gap)
Software
MS Office 2010
Visual Studio 2008/2010
SQL Server 2005/2008
ESET NOD32
Quickbooks
Chrome
othr related items for development.....
On the software side, I tend to keep it light, thus making it quicker and less likely to have conflicts.
Is there any tool out there which can tell me what process keeps disabling this service? It is very frustrating, having to go through this all the time. I know there will be some that say it slows down your machine, that may be their experience, but it is not mine and that penalty is outweighed by the convenience of being able to quickly search a 6GB email account.
View 9 Replies
View Related
