The fn keys no longer work and there is no means for me change my brightness, i've had this problem since my laptop was repaired. also the volume controls on my tool bar do not appear
View 4 RepliesI have a Vaio NS230E and my function keys do not work. I looked around and found that I need to download the Sony Notebook Utilities, but the problem is the link on Sony's website doesn't work at all. Does have the file or know where to get the file?
View 5 Replies View RelatedI have a Dell Inspiron 1525 - random keys on my keyboard no longer work,it out of warranty.
View 5 Replies View RelatedI have a VAIO SZ3 an I decided yo make a win vista clean install, I installed all drivers and everything works correctly except the FN+brightness or FN+ any combination. But misteriously FN+volume and mute works, I don't know why.
I also realized that when I switch the button of speed and stamina the window that ask you if restart does not apear.
I tried doing a clean install for my friend's Vaio VGN-FW463J/T. I left the hidden Sony recovery partition intact just in case something went wrong. I used a retail Vista x64 sp1 disk and installed it just fine. Then I started installing the drivers, but some of them wouldn't install. The Sony Shared Library starts to install, but then just disappears and doesn't say that it finished installing. The Sony notebook utilities doesn't install because I can't get Shared Library to install. A prompt says that it only works on vista, a message which causes me great confusion. But I can get the Sony Firmware Extension Parser Device Driver to install correctly. The problem is that the fn keys don't work.
And the Intel SATA Driver Registry Patch doesn't install. I think it's because I don't have the original drivers installed, or is this it? I'm missing something huge, aren't I?
I did a clean install of Windows 7 and I was surprised that almost everything is working out of the gate. There are only a few bugs that I've noticed.
1.) The Fn functions in the F-keys don't work. Which driver do I need for that?
2.) Same thing goes for the Mode - - - - - Settings keys above that. Which driver fixes that?
3.) In the device manager I have and unknown "Base System Device" with the Location of "PCI bus 7, device 3, function 2". What is this/How do I fix it?
4.) The touchpad doesn't scroll. I tried installing the driver from the Sony eSupport page, but it failed. (I reinstalled and rebooted and it's working)
And not a bug, but just a straight up question...
5.) Should I install Sony Shared Library? Do I need it for anything? I really don't plan on installing any of the programs that came pre-installed with Vista, unless it's necessary.
I have been having a bit of a nightmare with Sony support. Basically, when my laptop first arrived, my F7 key always looked a bit "off" - the backlight under it always seemed brighter, and it was slightly raised on one side, but I ignored it - how often does anyone use F7?
Anyway, I was cleaning the keyboard because it has that stupid type of keyboard that picks up every bit of oil (drives me mad!) and the F7 key just came off. It wasn't even a harsh cleaning
From the beginning, the A key on my Vaio VGN-Z590 keyboard has been typing aa instead of a. It sort of comes and goes - sometimes it's rare, sometimes almost always. I've had the same happen on o key just once or twice but no others. This never happened [just corrected aa here] to me on other keyboards [corrected again] incl Fujitsu and IBM laptops.....
View 3 Replies View RelatedThis is almost a classic problem. I just installed XP SP3 on a Vaio G11. I did everything according to Sony's plan. But the brightness keys don't work.
Is there a chance that Sony's drivers were written for XP SP2, and that SP3 is the cause of my problems?
Reason I'm thinking this is that SP3 recognized some devices that SP2 doesn't recognize
how to get your FN keys working and for this particular laptop at that Sony Vaio S460. There were descriptions of installing drivers in certain orders, as well as going to a third party site for the contrast portion. Unfortunately, that thread was closed.... but i had a very important question:
I've recently switched from XP to Windows 7 completely bypassing Vista. I had to re-install all the drivers from Sony (i believe i have most of the important things working) however when it came to the FN buttons, those few keys took me longer than the whole process of changing windows. TO my surprise, many of the drivers adapted themselves from XP to WIndows 7. Anyways, after trying everything, i think I finally got MOST of the FN buttons working.. However, when it comes to the volume portion, it only allows me to control up to 1 bar.. So when I click FNF4 - the volume will go up but only to the max of 1 bar?
Where can I buy a keyboard key from? I need a new numlock key. My friggen bird just ripped it off and broke it.
View 10 Replies View Relatedhow to get the FN keys to work under Windows 7 Professional. Is it possible to make it work or do we have to wait for Sony to release new drivers.
View 10 Replies View RelatedIt seemed to stop by itself after an apple update. Am on 10.6 with no other issues so far. Any way I can remove the update?
View 5 Replies View RelatedVaio VGN Z690 Function keys stoped working.
Vista Home Pre
I have had my laptop for a couple of weeks. I am no longer able to change the brightness with f2/f3 as well as from battery settings. Â
Â
Model:HP ENVY 15t-u000 x360 CTO Convertible PC
I will be needing a new laptop and was thinking about the Z. I kept wondering if the screen is too small for doing some typing on MS office, and general work on the laptop
View 10 Replies View RelatedI'll just list the details below, kind of says it all. other than the fact that I am going crazy trying to getthe back light to work under Windows again.
Sony Vaio PCG K23
Raedeon IGP 345M video card
Monitor works up until Windows loads.
Monitor works when running Ubuntu. Repeated 3 times
Monitor works when at C: prompt.
External monitor works when plugged in to port.
If I look hard enough I can see my desk top on the screen so I know it’s there
Have run System Restore 6 times from restore disc that were made on first use.
Have run System Restore 3 times by pressing the F10 key.
BIOS was still at default values, but I reset it anyway
Windows XP Home SP2 and is completely up to date.
All drivers are as current as I could find.
Windows indicates all drivers are working properly.
Refresh rate is at 60HZ.
I know the monitor works as it works fine with Ubuntu. However I cannot run one of the primary applications
I need to use under Ubuntu so I have to have Windows loaded.
Is there any way to enable the GPS on the Vaio Z with the Qualcomm chipset while maintaining wifi connectivity? I use Pdanet for sharing my 3g connection with my iphone and the only way to do this (other than using the cable, which isn't an option) is to use wifi.
I'd like to also have the ability to use the GPS functionality of the Z at the same time but because of a software restriction I can only use one or the other simultaneously.
I was wondering what the smartwi program actually does to enable GPS? Is it some sort of command it sends to the device?
I know on the earlier Z models with the Option chipset there was a command that you could use in hyperterminal to enable the GPS function, however it doesn't work for the Qualcomm and I'm unsure of whether terminal access is even possible with this device.
after i disassemble my vaio z the enter key and the delete key doesn't work, however rest of the keys work.
I even order a brand new keyboard from sony still have the same problem. Can any one please help me thanks.
Does anyone knows how TRIM works in that configuration ?
Have anyone done some tests yet?
if anyone here knows of any Sony coupons that would work on the Vaio FW series.
View 3 Replies View RelatedQuestion for Vaio TZ owners:
How well is the screen visible and readable outside, on a bright and sunny day?
Is the screen reflective and does that limit readability outside?
I have owned my Dell M1330 notebook PC (specs in signature below) for over 4 years. Â Several weeks ago, the left and right-click touchpad buttons stopped working. Â The touchpad itself seems to be operating normally. Â Â I surmise I inadvertently deactivated the touchpad. Â I checked the manual, but it did not reveal how to reactivate (or deactivate) the touchpad buttons. How to reactivate the touchpad buttons, such as using the shortcut keys? Â I read one post in a PC forum of a similar situation; in that situation, the user's touchpad cable had come loose, but I understand this is a rare occurrence. How to reactivate the touchpad left and right-click buttons.
View 3 Replies View RelatedI used the upgrade kit from Acer to do a clean install of Windows 7 to my Timeline 1410. Everything works great and I love this laptop... except that the brightness controls (Fn+Left/Right Arrow) do not work. It's locked at highest brightness.
I am at my wit's end trying to figure this out.
I have installed all the Win 7 drivers from Acer's site, particularly
- Newest bios
- Launch Manager
- Chipset drivers
- Intel graphics drivers
When I first boot it up, the brightness controls work fine during the BIOS steps. But once Windows takes over, the controls no longer function. In the Windows Mobility Center, there is no brightness control panel. [FWIW, my Dell, which does have functional brightness control, doesn't show one either.] All other Fn-combinations, like volume control, work fine.
How many of you enjoy using the 13.1" (1600x900) screen on the Vaio Z for Illustrator or Photoshop? Do you all plug it into larger monitors before using any of these or other Adobe Creative Suite applications? I do a lot of complex Illustrator work that requires attention to detail, but also some light Photoshop work. Other than that, my use of the laptop would be limited to MS Office, Firefox, and iTunes.
Further, would you prefer a 14.1" (1440x900) screen for Adobe CS work, without an external monitor? Does the extra inch and lower resolution make much of a difference?
At this point, this is the only thing keeping me from hitting the order button on either a somewhat expensive, yet powerful Z (plus an extra monitor, mouse, and keyboard), or a relatively cheaper, albeit less powerful Lenovo T400S (without an extra monitor or other accessories).
(The T400S's beautifully thin (0.83") profile is also rather attractive in comparison to the Z's bulkiness.)
Is it me, or do these massive Official VAIO blah Series Owners Threads not work to well?
They're tooo big and very dificult to find things buried in them.
I think forums work better when you have a specific problem and start a new thread on that... then people respond to help in that thread... And the conversation is so much less likely to go off on a tangent...
I.e. use these forums how they are normally used... One thread per subject. Most people are pretty good a adding the model in the subject if it's needed. This should make it a whole lot easier to browse thru and find stuff that it is right now...
I've just installed Windows 7 Ultimate 64bit on my Vaio Z11MNB. As Google told me there is a problem with the FN + F5/F6 brightness adjust in speed mode.
All Sony software ist installed correctly and in the newest version I found.
As in many threads mentioned I followed the right order. But I still cannot adjust the brightness in speed mode
This thread Problem with Vaio Z Windows 7 brightness lead me to the right graphic drivers I thougt... Okay these drivers[url] are for the ZD790 but this shouldn't matter it's the same 9300GS chipset...
The following sony software is installed:
SETTING_UTILITY_SERIES_5.1_5.1.0.11200
SFEP_DRIVER_SONY_8.0_10Q1_O_7_8.0.1.1
SPIC_DRIVER_8.0_09Q3_7_8.0.1.1
SONY_SHARED_LIBRARY_5.5_5.5.0.10160
VAIO_CONTROL_CENTER_4.1_4.1.0.10160
VAIO_EVENT_SERVICE_5.1FH_5.1.0.12010
VAIO_POWER_MANAGEMENT_5.0_5.0.0.11300
VAIO_SMART_NETWORK_3.1_3.1.0.11250
Another smaller problem: From time to time there is a yellow exclamation mark at the SD-Hostcontroller in the device manager. I've googled a lot but there seems to be no other driver than the windows included. VEN_1180&DEV_0822
I put XP on the Acer Timeline 4810T. How do you get the function keys (volume and brightness, mainly) to work?
View 4 Replies View RelatedWhever I want to press (fn + Prt sc) It won't take a picture of my screen.
Also, I can't (Ctrl + C,V,Z, or X.)
Info about computer-
HP Laptop
Used. (Go figure.)
#2 and y key missing.
Battery is very bad.
Keeps saying "standing by"
Will go to a page when I don't click on it.
My dad is seeing if I can take care of this one before I get my brand new one.
I have the following problem - after upgrading to Windows 7 I have only volume controls working, but not Fn+Fx key combinations.
Â
Details are:
Â
1) Fn key physically works - it worked on Vista
2) In order to have volume controls working I had to install Visual Studio 2010 Redistributable package
3) My BIOS version is 2.24, tried downgrading to 2.23 as well
4) System Interface Driver is installed alongwith Hotkey Support
5) Power Manager is installed
6) Tried older Vista drivers