I have been using the Vaio Z and it has run flawlessly. I even have been playing games such as Splinter Cell Conviction, Mass Effect 2, Dirt 2, and others. Recently however, I have been having lag issues with my graphics card. It happened first when I was playing Splinter Cell where every 4 seconds it would become choppy. I thought perhaps I was running it too high, but ever at the lowest everything (640 res, lowest everything) I had this stuttering issue. I started having this issue with all the games I use to be able to play perfectly. I have once uninstalled my nvidia drivers, but I reinstalled the nvidia drivers from sonys site and the latest physx drivers from nvidia.
It seems that I encounter a lot o problems with this new Vaio Z. In device manager everytihg seems to be ok except the Standard VGA Graphics Adapter which by the way has this error code: This device cannot start. (Code 10). Anyway, I guess that the above one is the actual graphics card and that one seems to be ok.
The display worked fine for 1 day but then I got this:
I picked up my new Z112GX last night and today after making sony's recovery discs i wiped and started a clean windows 7 professional install.
After this guide you should have a clean windows install with no "yellow" devices under system.
Windows 7 X64 Professional ISO: http://msft-dnl.digitalrivercontent..../X15-65805.iso
Then use the key on your machine. It will give activation issues jsut run through the automated phone activation and you will be fine. SEE BOTTOM POST FOR EASIER METHOD
My Z decides to give me a bluescreen whenever it wakes up from hybernation (under stamina and speed) and whenever I try to play newer games such as l4d. Older games such as ut2004 run fine...
I updates the Bios to R2, updated to the nvidia drivers and everything is running fine (brightness etc in both modes).
I was thinking it maybe has something to do with the directx version (11) but that wouldnt explain the wake up blue screen.
Z21vn running win 7 x64 ultimate
I also noticed when I try to change the power settings from high performance to anything else, i get a blue screen as well (system_service_exception)
I'm trying to update my Sony VAIO VGN-CR510D/W graphic's driver (GM965). Intel's site has the newest one 7.15.10.1666 and mine is currently at 7.14.10.1295. I go to "Update Driver" in my Device Manager but It does not find a new one. I downloaded the new one manually but it won't let me install it (Not supported). I am running Vista Home Premium 32bit.
im searching a way, how to change the graphic card.... How to replace the 9300M GS with a 9600M GT or something that are faster.
There must be a way to speedup the graphic... and we can construct a better cooling design.
I think a faster graphic card, like the 9600M GT, is better for the laptop, because, they have more pixel pipelines and all that.
I think if you underclock the graphic card, it will be much cooler and you can play much better games... in better performance, and much cooler as with the 9300M GS.....
I read that Sony Vaio FW's ATI Radeon 4650 is underclocked. I'm wondering if this is only exclusive to FW's 4650 or all Sony dedicated graphic cards are underclocked?
My current research shows that the VPCZ1 (US) either doesn't have a TPM, or Sony has gone to great lengths to keep us from enabling it. So far I've tried manually enabling the TPM (by setting a variable in the insyde UEFI area), and trying to get it to show in the setup menu, both attempts have failed.
The problem is the VPCZ1 was advertised with a TPM (at least when I bought it), and Sony has suddenly 'pulled it' silently. So I'd like to:
1) Figure out if the device actually has a TPM, and enable it if it does - Figure out why 0x68 is magically set to zero on boot - Open the laptop and look for infineon TPM (maybe figure out where it is on european models first)
2) If it doesn't, petition against Sony for false advertising. If anyone has any screenshots still of the SonyStyle (US) site before they took off all the TPM stuff, that'd be great... - get screenshot of sonystyle site - get screenshot of driver page showing TPM package
I've noticed a couple of annoying traits about my touchpad, which is probably related to the driver but was wondering if anyone else has noticed either of these:
Firstly, my touchpad sensitivity region does not extend all the way to the edges, especially towards the mouse buttons and the top of the pad. This can be seen by moving the cursor upwards (or down) and it'll stop before your finger actually reaches the border of the touchpad. I've disabled edge scrolling and other enhancements like edge regions. What's interesting is that once your finger is in the "dead zone" and the cursor no longer moves up, you can still move side-side. Horizontally, the problem isn't so bad. It's a bit like the touchpad is unaware where the physical edges are. Does anyone else have this?
Secondly, if you're using your middle finger for moving the mouse and your index finger comes near the surface, the mouse cursor freezes. I assume this is because it's detecting a multitouch (if you open the pressure graph, you don't have to touch the pad, it will detect the finger just above the surface). Adjusting the sensitivity only changes how hard you need to press for the cursor to move, but it'll still detect the presence of another finger above the pad and stop the cursor. Is it possible to disable multitouch? In an older laptop, the touchpad would work with two or more fingers by just averaging their motion which was kind of pointless but also would not have this problem.
Is there anything I can do to restore this "useless" behaviour? (or perhaps just respond to the strongest pressure point?)
Do any of you with VPCZ1s get a blinking cursor before Windows 7 starts? I do not recall getting a blinking cursor with the factory installed configuration and now, after a clean install, I get it. The blinking cursor reminds me of an old desktop PC!
i've been using the VPCZ1, and everything has been working great. but recently, i've been having this problem where out of the blue, my internet access gets cut off. And I cannot reconnect to the connect because it shows that there are no available networks. I have to restart the computer to get it to fix itself. 2nd time it happened was today.
I try a lot of methods for fixing it..(software + tapping, massaging..) but it's there...
I'm noticed it a couple days after purchase.. A red dot is nearly center of the screen and especially to become visible on white background.. FullHD resolution is hide it because it's toooooo tiny.. But if you know it's there, damn.. it's there...
I'm think to change it.. But i'm worry about to another bigger issue on new unit.. Louder fan, uneven backlight lcd, build quality issues...etc.. I have a one change right.. It's not warranty procedure because one stuck pixel is not meet warranty conditions..
I've been trying to create recovery disks for the new VPCZ1 I got a couple days ago through the VIAO care Recovery and Restore tool. I get two error messages either:
"No installed optical drive is detected on your computer" even though the drive seems to be working fine outside of the recovery tool.
or
"The disc in the drive is not blank or is not a supported disc type" even though the computer recognizes the disc as a blank dvd outside of the recovery tool.
I usually get the first error message, then when I hit "back" and click create a recovery disk again, I get the second error message.
BEFORE CONTINUING WITH THIS POST, BACKUP YOUR DATA AND CREATE RECOVERY DISKS IF YOU DECIDE TO DO THIS!! DID I MENTION MAKING RECOVERY DISKS AND BACKUPS? GOOD!
RAID 0 as defined from this Wikipedia Article
Quote:
RAID 0 RAID 0 (striped disks) distributes data across multiple disks in a way that gives improved speed at any given instant. If one disk fails, however, all of the data on the array will be lost, as there is neither parity nor mirroring. In this regard, RAID 0 is somewhat of a misnomer, in that RAID 0 is non-redundant. A RAID 0 array requires a minimum of two drives. A RAID 0 configuration can be applied to a single drive provided that the RAID controller is hardware and not software (i.e. OS-based arrays) and allows for such configuration. This allows a single drive to be added to a controller already containing another RAID configuration when the user does not wish to add the additional drive to the existing array. In this case, the controller would be set up as RAID only (as opposed to SCSI only (no RAID)), which requires that each individual drive be a part of some sort of RAID array...............
how to update the driver for the graphic card of this laptop its a 8400m gt. When i tried some off the laptopvideo2go site the function keys didnt work.
Earlier i changed my window vista home premium to window 7, but then i changed it to window vista ultimate.
when i had window 7, my graphics card which is nvidia work perfectly fine, but after i change to window vista ultimate, i " lost " my nvidia driver. i downloaded nvidia driver at ww.nvidia.com but when i tried to install it, i get an error " The NVIDIA setup program could not locate any drivers that are compatible with your current hrdware. Setup will now exit."
I really want to install that driver, i have nvidia graphic card but i cant install the driver
I just want to show you how much overclock you can expect from the HD4650 Mobile graphic card. Wait for 1080P Full HD results.
I don't have external monitor to do 1280x1024 standard test, I'll post the results next week when my monitor arrived.
( Due to poor 128Bit memory controller VGA can't handle 1080P res gaming even with No AA/All settings Low & Crysis FPS stay below 25. However 720P gaming is superb & Crysis stay above 36FPS all time with NO AA/ All Medium setting)
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
I have just been given a VAIO PCG8A2M (GRX316MP) , i was told "it's broken but if you can fix it yo can have it" so having a quick look at it there's no sign of life on the display but the lights come on and i can here the HDD heads moving about.
Looking a little more i found that all the ram is missing , so now im not sure if its worth buying some ram to see if it works or not ? The lack of ram would prob explain the lack of display but i wonder if i should be getting POST beeps at least, which im not.
So my question is if a VAIO had no ram should (if all else was working) it be getting POST beeps ?
Just performed a successful XP downgrade on my Vaio Z520, but have noticed that on this copy of the Vaio Silver Desktop Theme/Appearance doesn't exist.
I had it on my SZ and loved it over the XP Blue. Is there a way to get it back? I still have the restore discs from the SZ.
I don't know whats the diference (besides the price), between VAIO TZ295N & VAIO TZ395N. Specs in all the websites I've checked say they have exactly the same components: Intel coreduo 1.33Ghz 2GB RAM DVD-RW and 64GB SSD Hardrive. I was wonder if the diference might be in the hard drive interface, with the TZ295N being PATA and TZ395N being SATA.
I'm wondering if the Blu-ray optical drive (Panasonic UJ-232A) of the (old) VAIO Z series will be able to fit into the (new) VAIO Z series? I would really appreciate it if anyone is able to answer my question.
The reason I'm asking is because I'm seriously thinking of selling my VAIO Z690 & just buying the base Sony VAIO Z (VPCZ112GX/S). I may just be able to afford that base model & the icing on the cake will definitely be the UJ-232A drive being able to fit into the (new) VAIO Z series & work.
Am planning to get a sony laptop for me. The design simply rocks I am getting mixed reviews about cw and E series. But i made up my mind to get one.
My budget is aroung 40000rupees. Thats around 800$. So suggest me a better one between these two for occasional moderate and less(mosltly) demanding games. I dont care whether its 14 or 15 inch.
Am looking at lower end versions of both the models.
Only difference is CW uses Nvidia Geforce 310 and the E series uses some Radeon 5000 series one. CW has 14 inch screen whereas E series has a 15.5 inch screen. In the models which i am looking at both have matte finish and both has WXGA:1366 x 768 VAIO Display.
which one should i go for. whether the screen quality will be on par to Inspiron one atleast? ( I dont need HD).
