Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
Yesterday my brand-new VPCZ11X5E completed an automatic windows update, and shut down after completing the installation procedure. Since then windows will not start up properly: it stays in the start up phase (you know, with the windows 7 logo), before the log-on screen.
or should i just do a re-install (=losing some important documents).
Phoenix BIOS Editor (2.2) Open R0122S5.WPH, Enabled Intel VT:“setup table”-->"intel"-->"cpu control sub-menu"-->"merom cpu control sub-menu" -->"Intel Virtualization Technoloy" ,Modify "Disabled" "*" to "Enabled",Enabled AHCI: “setup table”-->"intel"-->"ICH control sub-menu"-->"integrated device "-->"ich sata pata control"-->“AHCI Configuration”,modify "Disabled" "*" to "Enabled",
See Figure 2 below,in these two places will be able to successfully Enable the VT and AHCI functions can be a do?You Moren so successful ?
i have got vaio fz140 eb model which came with windows vista home premium and 200 gb disk.
i have installed western digital 500 gb disk drive which was running fantastic till 4 days.i have installed windows 7 home premium family pack on this system.
issue i am facing is weird.few days ago i copied few GB of data from western digital portable drive of my senior.while copying data,it was scanned by Kaspersky internet security which found some 70 virus .it managed to fix them all.it was fat32 formatted drive.
now problem is my laptop becomes unresponsive for long duration.then only thing i can do is forced shutdown.after restart.it does chkdisk and says fixing this fixing that.
but problem is still their.what i realised is it was giving errors on some perticular file.
i ran western digital life tools to diagnose this drive.it says SMART test pass but it says this error........
I have a Vaio TZ180N laptop with a 5400RPM hard disk and Vista. The disk is incredibly slow in my opinion - especially since I use this as a development machine (perhaps not best suited for the job!!). I have 2GB memory in it, but that doesn't seem to help all that much as the system is constantly running at 90%+ memory usage.
I would like to replace the disk with an SSD disk if possible. Will this work?
I'm a novice when it comes to the hardware of a laptop and will need some advice. Are SSD drives basically compatible with the disk in the Vaio? If so, should I look for something specific while buying an SSD drive - such as a specific interface or something?
If this is possible, will this significantly improve the performance of my machine?
Using Win 8.1 x64 and the latest Synaptics drivers, if I'm typing or holding a key the left click does not work. I've tried every setting in the Synaptics control panel and can't figure out how to disable this behavior. Â How to disable this? It's very annoying, especially as there is a delay after pressing a key before I can click the mouse of around a half second. Â Easily recreated by opening notepad and holding down the A key, then trying to left click something.
I want to use my notebook to do a presentation in class. However, no matter which projector I connect to my Vaio SZ440, the display is unable to be shown on the projector.
I've tried Fn+F7, not working, tried stamina mode, not working, tried speed mode, not working. I've tried "Connect to a projector or other external display", not working. I've no idea what I should do. I really need to fix this or else I'll get screwed this semester. Every other notebook the projector connects to, it will automatically detect and show the display. Only mine is like this.
Please help. About 1 year ago I didn't experience any problem when connecting to a projector. I didn't remember what exactly I do to make it go bad. But I really need it to work this semester.
I finally got my VPC Z with HDD/no DVD today and I thought I'd start up a thread on the subject for those like me who once receiving their Z will be trying to use Vaio Recovery Center to create recovery disks without using a DVD Writer.
Installing Win 7 from a USB stick is fairly well documented on the web but the problem above isn't, certainly not for the VPC Z anyway. I know that it's probably gonna be simpler to just create a bootable USB key/stick and copy the relevant drivers to it and use that (something I'll be doing to get rid of all the crapware sony have preinstalled) but I like having the security of an additional backup solution just in case I royally balls it up.
The main issue (i think) is with Vaio Recovery Center itself, if you try to create the recovery disk the software will complain that no dvd writer can be found. After trying a couple of virtual CD/DVD/BD-ROM/HD-DVD tools I took the advice of TofuTurkey (cheers fella) in the vaio owners thread and tried Virtual CD. I'm happy to report that this has the capability to create a fake drive with various fake media discs and does indeed fool the Vaio software into creating an ISO to the internal hard drive. I setup a DVD+R DL drive and everything went smothly. Vaio Rocovery created a single ISO 5,344,117KB in size.
Seems the next trick is to find a way of creating a bootable USB stick (again there's plenty of info out there concerned with installing Win 7) and then writing the ISO (or contents of?) it to it and filing it away for safe keeping. ZoinksS2k mentioned I should be "sure to set the partition to Active and run bootsect to make it bootable." which is going to be my next step after I've read up a little again on this.
I have a VGN-Z51WG-B laptop (Win7 x64). Since new the Vaio update tells me there are "No updates" available. If however I check manually via the esupport website there are numerous updates for my model which should be available via the Vaio Update Tool. Is there some security settings blocking detection? I have reduced IE8 Security down to "medium".
I have a Sony Vaio - VGN-NR180E and its 1024 by 768 pixels. For some reason when i was uninstalling program it changed my laptop screen and now I can't make it stretch or move the LCD screen. Its just in the middle and it has like black margin all around it. how can i make my laptop to be a fullscreen again? Please help me. During the time i was uninstalling programs I don't know what uninstall but it did show or said something with driver and said to restart your computer and I did and when the window pops up there were black margins around my window and my mouse can only stay inside my window.
I have a notebook sony VAIO vgn-FS810 and yesterday i'm updating my cddvd with Sony® DW-Q58A-VN Firmware Update [url] , now my optical drive dont work , when i'm put disk in the drive , it is starting to read and i have no result, a system cant see the disk. I try to delete the driver of optical drive , but i't is not help to me. ( The notebook also can't see the disk's in DOS mode).
I've just installed Windows 7 Ultimate 64bit on my Vaio Z11MNB. As Google told me there is a problem with the FN + F5/F6 brightness adjust in speed mode.
All Sony software ist installed correctly and in the newest version I found.
As in many threads mentioned I followed the right order. But I still cannot adjust the brightness in speed mode
This thread Problem with Vaio Z Windows 7 brightness lead me to the right graphic drivers I thougt... Okay these drivers[url] are for the ZD790 but this shouldn't matter it's the same 9300GS chipset...
The following sony software is installed: SETTING_UTILITY_SERIES_5.1_126.96.36.19900 SFEP_DRIVER_SONY_8.0_10Q1_O_7_188.8.131.52 SPIC_DRIVER_8.0_09Q3_7_184.108.40.206 SONY_SHARED_LIBRARY_5.5_220.127.116.1160 VAIO_CONTROL_CENTER_4.1_18.104.22.16860 VAIO_EVENT_SERVICE_5.1FH_22.214.171.12410 VAIO_POWER_MANAGEMENT_5.0_126.96.36.19900 VAIO_SMART_NETWORK_3.1_188.8.131.5250
Another smaller problem: From time to time there is a yellow exclamation mark at the SD-Hostcontroller in the device manager. I've googled a lot but there seems to be no other driver than the windows included. VEN_1180&DEV_0822
I got my CW27FX and i ran the VAIO update. it told me to update the updater, and i did. Now everytime i open the updater, i get "Cannot acquire the configuration settings for VAIO Update" when it's checking for updates.
Also, every now and then i get an error from VAIO messenger.
It's also now compatible with IE8's rendering engine (previous Vaio Care versions would crash when rendering checkup reports. Boots much faster than it used to and seems to work with Vista a bit better in general, though I've not looked at every feature.
good piece of software to have an allow to run if you haven't before. FYI.
From browsing the forums, i see that everyone is having trouble updating their drivers. Mobility modder currently does not support the ATI 4 series but there is still a way to install the drivers for us fortunuately . By doing this, you are able to install the display driver v9.6 but no CCC unforunately; however you can still retain the CCC v9.2 from Sony's official drivers.
1> Download the appropriate version OS of the 9.6 driver from [url]
2> Double click the file you just download and click install. It will unzip a folder to C:ATI (default). These are driver files. When the actual installation wizard comes up, cancel it.
3> Browse to C:ATI9-6_beta_win7_64_dd_CC (Driver name, e.g.)PackagesDriversDisplayW7_INF (For 32-bit) OR W76A_INF (for 64-bit)
**Btw, I am doing this example based on the Window 7 Install. (Other versions of the OS should be the same except the INF file name may be different)**
4> I am under 64-bit so I will use W76A_INF as an example for this guide. Double click on the INF file (for W7, it is named C7_81757)
5> Scroll down the file until you see a list like;
"ATI Radeon HD 2400 XT" = ati2mtag_RV610, PCIVEN_1002&DEV_94C1&SUBSYS_0D021002 "ATI Radeon HD 2900 PRO" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_30001002 "ATI Radeon HD 2900 XT" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_25521002
6> Add this anywhere between the entries you see above (does not have to be exact, just place this entry somewhere along the lines of the WHOLE list) "ATI Mobility Radeon HD 4570" = ati2mtag_M9x, PCIVEN_1002&DEV_9553&SUBSYS_9033104D Congratulations, the display driver can now be installed ONLY VIA the HAVE DISK method.
7> Quick review on HAVE DISK method; Device Manager > Right Click ATI 4570 then Update Driver Software > Browse my computer > Let me pick a list of Device drivers... > Have Disk > (Now browse to the INF file you just edited, in this example; the C7_81757 inf file.) Install, voila, DONE.
8> Now, to get the CCC v9.2 (Can't get 9.6 yet), get Sony's ATI drivers, run it and click on CUSTOM install, NOT EXPRESS, install CCC only and anything that is mandatory (DO NOT INSTALL THEIR DISPLAY DRIVERS!!!) .Voila, CCC 9.2 function (which is the same as 9.6 essentially).
I believe this method works for NW series w/ ATI 4570 too.
Just got my new HP Pavillion dv5-1000 laptop and I'm very pleased with it so far, apart from one problem.
The machine came without any backup disks, which seems to be a standard HP thing. So I've tried to create my own disk using the Recovery Manager software. It goes through the first part of the process collecting files, but when it reaches 100% I get an error message saying that the files are more than 0mb and it can't continue.
I've tried using a different blank DVD but get the same message.
It's a pain, and is spoiling my enjoyment of an otherwise excellent machine. If anyone can suggest a way around this I'd be grateful.
I've tried this fix:unable to burn Recovery DVD but the software doesn't install.
I have a serious dillemma , I'm trying to install Windows 7 - 64 Bit on my 32-bit vista laptop.
I have a sony vaio fz290.
I burned the image of a 7077 build I downloaded from demonoid. Booted off of it and clicked install , and then I got an error about not having a Cd/Dvd drive device driver missing , I tried a lot of things and searched all over the internet.
A few things to ask as I'm desperate
What can I do to make this work ?
Do I have to format my comp for this to work or can I just update over the 32-bit installation