I have a VGN-Z51WG-B laptop (Win7 x64). Since new the Vaio update tells me there are "No updates" available. If however I check manually via the esupport website there are numerous updates for my model which should be available via the Vaio Update Tool. Is there some security settings blocking detection? I have reduced IE8 Security down to "medium".
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
I have a notebook sony VAIO vgn-FS810 and yesterday i'm updating my cddvd with SonyŽ DW-Q58A-VN Firmware Update [url] , now my optical drive dont work , when i'm put disk in the drive , it is starting to read and i have no result, a system cant see the disk. I try to delete the driver of optical drive , but i't is not help to me. ( The notebook also can't see the disk's in DOS mode).
I got my CW27FX and i ran the VAIO update. it told me to update the updater, and i did. Now everytime i open the updater, i get "Cannot acquire the configuration settings for VAIO Update" when it's checking for updates.
Also, every now and then i get an error from VAIO messenger.
It's also now compatible with IE8's rendering engine (previous Vaio Care versions would crash when rendering checkup reports. Boots much faster than it used to and seems to work with Vista a bit better in general, though I've not looked at every feature.
good piece of software to have an allow to run if you haven't before. FYI.
From browsing the forums, i see that everyone is having trouble updating their drivers. Mobility modder currently does not support the ATI 4 series but there is still a way to install the drivers for us fortunuately . By doing this, you are able to install the display driver v9.6 but no CCC unforunately; however you can still retain the CCC v9.2 from Sony's official drivers.
1> Download the appropriate version OS of the 9.6 driver from [url]
2> Double click the file you just download and click install. It will unzip a folder to C:ATI (default). These are driver files. When the actual installation wizard comes up, cancel it.
3> Browse to C:ATI9-6_beta_win7_64_dd_CC (Driver name, e.g.)PackagesDriversDisplayW7_INF (For 32-bit) OR W76A_INF (for 64-bit)
**Btw, I am doing this example based on the Window 7 Install. (Other versions of the OS should be the same except the INF file name may be different)**
4> I am under 64-bit so I will use W76A_INF as an example for this guide. Double click on the INF file (for W7, it is named C7_81757)
5> Scroll down the file until you see a list like;
"ATI Radeon HD 2400 XT" = ati2mtag_RV610, PCIVEN_1002&DEV_94C1&SUBSYS_0D021002 "ATI Radeon HD 2900 PRO" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_30001002 "ATI Radeon HD 2900 XT" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_25521002
6> Add this anywhere between the entries you see above (does not have to be exact, just place this entry somewhere along the lines of the WHOLE list) "ATI Mobility Radeon HD 4570" = ati2mtag_M9x, PCIVEN_1002&DEV_9553&SUBSYS_9033104D Congratulations, the display driver can now be installed ONLY VIA the HAVE DISK method.
7> Quick review on HAVE DISK method; Device Manager > Right Click ATI 4570 then Update Driver Software > Browse my computer > Let me pick a list of Device drivers... > Have Disk > (Now browse to the INF file you just edited, in this example; the C7_81757 inf file.) Install, voila, DONE.
8> Now, to get the CCC v9.2 (Can't get 9.6 yet), get Sony's ATI drivers, run it and click on CUSTOM install, NOT EXPRESS, install CCC only and anything that is mandatory (DO NOT INSTALL THEIR DISPLAY DRIVERS!!!) .Voila, CCC 9.2 function (which is the same as 9.6 essentially).
I believe this method works for NW series w/ ATI 4570 too.
I have a serious dillemma , I'm trying to install Windows 7 - 64 Bit on my 32-bit vista laptop.
I have a sony vaio fz290.
I burned the image of a 7077 build I downloaded from demonoid. Booted off of it and clicked install , and then I got an error about not having a Cd/Dvd drive device driver missing , I tried a lot of things and searched all over the internet.
A few things to ask as I'm desperate
What can I do to make this work ?
Do I have to format my comp for this to work or can I just update over the 32-bit installation
Update: NVIDIA released 197.44 drivers for notebooks(with OpenGL 4 support for Fermi GPU), GT300M only gets support up to 3.3
I used the same inf file(changing drivers' version and date, of course) and everything is working as expected. Just follow the same instructions if you wanna try. - 197.44 inf file and instructions: Midtown's 197.44 Instructions.zip (Mirrors: Megaupload, Hotfile) - NVIDIA's original drivers: Download for Windows 7(64-bit)
So I managed to install the new NVIDIA drivers for laptops, 197.16 on my VAIO F after modifying the inf file myself for a few hours. I'm no expert, but I guess it worked out fine.
Here's the link for inf file & instructions: Midtown's 197.16 Instructions.zip
Disclaimer: I'm not responsible for any hardware/software failure.
After testing the new drivers for 24hrs: - No flicker at low brightness - No uneven brightness after pressing the "Display Off" button - Fan not constantly running - "Normal" temperature compared to Sony's "certified" graphic drivers - No problems after sleep/restart........................
I have this "problem" since I got my Z. When I start vaio update 3 utility I get this error "messageID=0008" there are no updates for your model bla bla...
However when I go to vaio support page, there are some new updates for my Z590N model (new Bios, USB patch...)
I have downloaded new version of Viao Update utility 3.2.something but I had to uninstall my current version (3.1.something), which I did. However when I started this new setup message poped up "there is no previous version installed" - abort.
I have checked esupport page where is said if you have problems with Vaio Update 3, to download Sony Shared Library which suppose to contain vaio update utility), I run installation but it doesn't install Vaio Update 3
Now, I can live with this esupport page regular visit updates,
i have a Sony VGN-AW31M/H and the Vaio Update site says there are 2 updates available, a WinBD one and a bios update. When trying to download either of these, a small download window appears with 0/xxxxxxxx bytes but no progress happens. Eventually it times out with the error above.
I have tried resetting IE cache, deleting the C:update folder, adding the vaio update exe to the windows firewall, im not sure what else i can try.
I have a SONY VIAO VGN-SZ433N_B. I'm constantly reminded that there are new updates for my lap top, but when I try to install I am told 'VAIO Update 4.0 is required. VAIO Update (Ver. 4.0 and above) is required on your VAIO Notebook.'
So I installed Sony Update 4.0.0.08240 but still it isnt recognised. I have even tried to uninstall the previous Update module and then re install without success. I keep getting the same message, indicating that the Viao Update 4 I have isnt being recognised.
I have just been given a VAIO PCG8A2M (GRX316MP) , i was told "it's broken but if you can fix it yo can have it" so having a quick look at it there's no sign of life on the display but the lights come on and i can here the HDD heads moving about.
Looking a little more i found that all the ram is missing , so now im not sure if its worth buying some ram to see if it works or not ? The lack of ram would prob explain the lack of display but i wonder if i should be getting POST beeps at least, which im not.
So my question is if a VAIO had no ram should (if all else was working) it be getting POST beeps ?
I don't know whats the diference (besides the price), between VAIO TZ295N & VAIO TZ395N. Specs in all the websites I've checked say they have exactly the same components: Intel coreduo 1.33Ghz 2GB RAM DVD-RW and 64GB SSD Hardrive. I was wonder if the diference might be in the hard drive interface, with the TZ295N being PATA and TZ395N being SATA.
I'm wondering if the Blu-ray optical drive (Panasonic UJ-232A) of the (old) VAIO Z series will be able to fit into the (new) VAIO Z series? I would really appreciate it if anyone is able to answer my question.
The reason I'm asking is because I'm seriously thinking of selling my VAIO Z690 & just buying the base Sony VAIO Z (VPCZ112GX/S). I may just be able to afford that base model & the icing on the cake will definitely be the UJ-232A drive being able to fit into the (new) VAIO Z series & work.
I signed up just to ask this question: I was trying to play a recent Blu-Ray movie 'Taken' and the introduction screen notified me that my player was out of date.
After combing the Sony site and internet for several hours I cannot seem to find an update for the VGN-FW200 Intervideo WinDVD BD for Vaio software (even though this update is availible for other Sony Vaio laptops)
I noticed that most of their current computers came out last July/August. Does Sony completely replace their whole line up every year or sometimes do they just update the previous year's model? Are any of the current models they offer more than a year old? How long before new laptops come out do they get announced?
My sister has a sony VGN-FZ190, and we just put in a new hard drive...problem is, i need to update the drivers, and i cant figure out what she needs, and what she doesnt. the support site is terrible in contrast to dells site (for my dell E6400), so i am kind of lost.
She definitely needs a GPU firmware update (1.0 in windows experience), but i have no idea what to get...nvidias website wont tell me what to download since its a laptop GPU. Are there any other important firmware updates or anything to install, or anything else i should know about this before i mess around with it? Do sony laptops use Intel matrix storage manager? I know that was an important update for mine.
i have a sony vaio vgn-ns290j laptop and i was told I needed to do a bios update..well i downloaded the bios driver from the sony website..started doing the update..and mid way through the laptop blue screened. Now when I go to turn it on it gets power but does not post..Is there a way I can reset it back to the default..?? why does sony offer a driver that bricks your motherboard?
I got my Z890 the other day, and I have now started to reformat the thing and get it cleaned up. I've been following Sigma957's guide, and when I try to install the Sony Shared media thing I get the error, "This update can only be run in Windows Vista". What's up with this?