I have a SONY VIAO VGN-SZ433N_B. I'm constantly reminded that there are new updates for my lap top, but when I try to install I am told 'VAIO Update 4.0 is required. VAIO Update (Ver. 4.0 and above) is required on your VAIO Notebook.'
So I installed Sony Update 4.0.0.08240 but still it isnt recognised. I have even tried to uninstall the previous Update module and then re install without success. I keep getting the same message, indicating that the Viao Update 4 I have isnt being recognised.
I noticed that most of their current computers came out last July/August. Does Sony completely replace their whole line up every year or sometimes do they just update the previous year's model? Are any of the current models they offer more than a year old? How long before new laptops come out do they get announced?
should I download it from windows update site? I dont know the difference between two drivers from HP site and windows update. from hp site there is no such new driver for nvidia and I tried the driver from the windows update it caused forever load after vista login so i uninstalled and went back to old HP's own old nvidia driver so it speeds up.
I signed up just to ask this question: I was trying to play a recent Blu-Ray movie 'Taken' and the introduction screen notified me that my player was out of date.
After combing the Sony site and internet for several hours I cannot seem to find an update for the VGN-FW200 Intervideo WinDVD BD for Vaio software (even though this update is availible for other Sony Vaio laptops)
I have a VGN-Z51WG-B laptop (Win7 x64). Since new the Vaio update tells me there are "No updates" available. If however I check manually via the esupport website there are numerous updates for my model which should be available via the Vaio Update Tool. Is there some security settings blocking detection? I have reduced IE8 Security down to "medium".
My sister has a sony VGN-FZ190, and we just put in a new hard drive...problem is, i need to update the drivers, and i cant figure out what she needs, and what she doesnt. the support site is terrible in contrast to dells site (for my dell E6400), so i am kind of lost.
She definitely needs a GPU firmware update (1.0 in windows experience), but i have no idea what to get...nvidias website wont tell me what to download since its a laptop GPU. Are there any other important firmware updates or anything to install, or anything else i should know about this before i mess around with it? Do sony laptops use Intel matrix storage manager? I know that was an important update for mine.
i have a sony vaio vgn-ns290j laptop and i was told I needed to do a bios update..well i downloaded the bios driver from the sony website..started doing the update..and mid way through the laptop blue screened. Now when I go to turn it on it gets power but does not post..Is there a way I can reset it back to the default..?? why does sony offer a driver that bricks your motherboard?
I got my Z890 the other day, and I have now started to reformat the thing and get it cleaned up. I've been following Sigma957's guide, and when I try to install the Sony Shared media thing I get the error, "This update can only be run in Windows Vista". What's up with this?
I bought my Sony SZ series a while back on my trip to Japan. But whenever I try to do a driver update or upgrade it takes forever (24-36hours) and would often disconnect because it connects to the 'Asia Support Site'
why the BIOS version R3220Y1 on the Sony support site is dated 10/13/2009. I downloaded the same version off the site several weeks ago so I am wondering why it is dated only 4 days ago.
I'm using a Sony VAIO Laptop. its model is VGN-SZ48GN. BIOS Version is R0111N0. I want to update this to latest version. Do you know anyplace to download this ?
how to update the driver for the graphic card of this laptop its a 8400m gt. When i tried some off the laptopvideo2go site the function keys didnt work.
I have a notebook sony VAIO vgn-FS810 and yesterday i'm updating my cddvd with SonyŽ DW-Q58A-VN Firmware Update [url] , now my optical drive dont work , when i'm put disk in the drive , it is starting to read and i have no result, a system cant see the disk. I try to delete the driver of optical drive , but i't is not help to me. ( The notebook also can't see the disk's in DOS mode).
Yesterday my brand-new VPCZ11X5E completed an automatic windows update, and shut down after completing the installation procedure. Since then windows will not start up properly: it stays in the start up phase (you know, with the windows 7 logo), before the log-on screen.
or should i just do a re-install (=losing some important documents).
I got my CW27FX and i ran the VAIO update. it told me to update the updater, and i did. Now everytime i open the updater, i get "Cannot acquire the configuration settings for VAIO Update" when it's checking for updates.
Also, every now and then i get an error from VAIO messenger.
It's also now compatible with IE8's rendering engine (previous Vaio Care versions would crash when rendering checkup reports. Boots much faster than it used to and seems to work with Vista a bit better in general, though I've not looked at every feature.
good piece of software to have an allow to run if you haven't before. FYI.
I have done a clean install of Windows 7 64-bit informed by Firestone and others on this Forum. Everything works well - in fact arguably better in terms of functionality of Stamina/Speed switch - with one exception.
I have not been able to install the WWAN successfully. I have tried a number of times to uninstall and reinstall the drivers from links on this site and also even tried the Sony EU support site Windows 7 drivers with no luck. I have tried asking windows to search for the best driver with no luck. Globetrotter Connect has installed correctly, as far as I can see, but just doesn't pick up the WWAN card.
From browsing the forums, i see that everyone is having trouble updating their drivers. Mobility modder currently does not support the ATI 4 series but there is still a way to install the drivers for us fortunuately . By doing this, you are able to install the display driver v9.6 but no CCC unforunately; however you can still retain the CCC v9.2 from Sony's official drivers.
1> Download the appropriate version OS of the 9.6 driver from [url]
2> Double click the file you just download and click install. It will unzip a folder to C:ATI (default). These are driver files. When the actual installation wizard comes up, cancel it.
3> Browse to C:ATI9-6_beta_win7_64_dd_CC (Driver name, e.g.)PackagesDriversDisplayW7_INF (For 32-bit) OR W76A_INF (for 64-bit)
**Btw, I am doing this example based on the Window 7 Install. (Other versions of the OS should be the same except the INF file name may be different)**
4> I am under 64-bit so I will use W76A_INF as an example for this guide. Double click on the INF file (for W7, it is named C7_81757)
5> Scroll down the file until you see a list like;
"ATI Radeon HD 2400 XT" = ati2mtag_RV610, PCIVEN_1002&DEV_94C1&SUBSYS_0D021002 "ATI Radeon HD 2900 PRO" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_30001002 "ATI Radeon HD 2900 XT" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_25521002
6> Add this anywhere between the entries you see above (does not have to be exact, just place this entry somewhere along the lines of the WHOLE list) "ATI Mobility Radeon HD 4570" = ati2mtag_M9x, PCIVEN_1002&DEV_9553&SUBSYS_9033104D Congratulations, the display driver can now be installed ONLY VIA the HAVE DISK method.
7> Quick review on HAVE DISK method; Device Manager > Right Click ATI 4570 then Update Driver Software > Browse my computer > Let me pick a list of Device drivers... > Have Disk > (Now browse to the INF file you just edited, in this example; the C7_81757 inf file.) Install, voila, DONE.
8> Now, to get the CCC v9.2 (Can't get 9.6 yet), get Sony's ATI drivers, run it and click on CUSTOM install, NOT EXPRESS, install CCC only and anything that is mandatory (DO NOT INSTALL THEIR DISPLAY DRIVERS!!!) .Voila, CCC 9.2 function (which is the same as 9.6 essentially).
I believe this method works for NW series w/ ATI 4570 too.
I have an AR-VGN370. After many months of waiting Vista Service Pack 1 finally is offered via Windows Update. I have assumed it was the Sigmatel driver that had prevented me from receivng SP 1. Is there anyone else for whom SP1 has recently become available and installed successfully? I am very hestitant to allow the install.
