Sony :: Vaio Update Error "downloading From The Ftp" VGN-AW31M/H
Oct 23, 2009
i have a Sony VGN-AW31M/H and the Vaio Update site says there are 2 updates available, a WinBD one and a bios update. When trying to download either of these, a small download window appears with 0/xxxxxxxx bytes but no progress happens. Eventually it times out with the error above.
I have tried resetting IE cache, deleting the C:update folder, adding the vaio update exe to the windows firewall, im not sure what else i can try.
I have a sony fz-180e and i had to reinstall my whole operating system and i lost the viao camera capture utility application and i cant use my camera what so ever, can any one help me with this? I need to get the softeware again but i cant find it ANYWHERE.....
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
I got Vaio FZ190 with faulty Nvidia chip, then i had my motherboard replaced. The problem is i cannot restore my C: drive using DVD i made. So, i tried hidden partition by press F10 and is also not working. Here is the code i got while i was trying to do so,
"Cannot use this recovery disc for this computer. Confirm the model number"
when I click Ok, this message appears
"error: CompareSnyIniToPacIni, Error: 92"
Then I click OK and it drops me back to the Vaio recovery centre and this cycle will happen again when I repeat to restore drive c.
Both DVD and hidden partition was working just fine before i had my motherboard replaced. I search all thread and find out that system recovery will check my BIOS before it can restroe my C: drive so i try to reset BIOS setting by pressing F9 in BIOS setting and it's still not working. Now, i can use my vaio just fine but i can't restore my C: drive.
I have a VGN-Z51WG-B laptop (Win7 x64). Since new the Vaio update tells me there are "No updates" available. If however I check manually via the esupport website there are numerous updates for my model which should be available via the Vaio Update Tool. Is there some security settings blocking detection? I have reduced IE8 Security down to "medium".
I'm using a Sony VAIO Laptop. its model is VGN-SZ48GN. BIOS Version is R0111N0. I want to update this to latest version. Do you know anyplace to download this ?
I have a notebook sony VAIO vgn-FS810 and yesterday i'm updating my cddvd with Sony® DW-Q58A-VN Firmware Update [url] , now my optical drive dont work , when i'm put disk in the drive , it is starting to read and i have no result, a system cant see the disk. I try to delete the driver of optical drive , but i't is not help to me. ( The notebook also can't see the disk's in DOS mode).
I got my CW27FX and i ran the VAIO update. it told me to update the updater, and i did. Now everytime i open the updater, i get "Cannot acquire the configuration settings for VAIO Update" when it's checking for updates.
Also, every now and then i get an error from VAIO messenger.
It's also now compatible with IE8's rendering engine (previous Vaio Care versions would crash when rendering checkup reports. Boots much faster than it used to and seems to work with Vista a bit better in general, though I've not looked at every feature.
good piece of software to have an allow to run if you haven't before. FYI.
From browsing the forums, i see that everyone is having trouble updating their drivers. Mobility modder currently does not support the ATI 4 series but there is still a way to install the drivers for us fortunuately . By doing this, you are able to install the display driver v9.6 but no CCC unforunately; however you can still retain the CCC v9.2 from Sony's official drivers.
1> Download the appropriate version OS of the 9.6 driver from [url]
2> Double click the file you just download and click install. It will unzip a folder to C:ATI (default). These are driver files. When the actual installation wizard comes up, cancel it.
3> Browse to C:ATI9-6_beta_win7_64_dd_CC (Driver name, e.g.)PackagesDriversDisplayW7_INF (For 32-bit) OR W76A_INF (for 64-bit)
**Btw, I am doing this example based on the Window 7 Install. (Other versions of the OS should be the same except the INF file name may be different)**
4> I am under 64-bit so I will use W76A_INF as an example for this guide. Double click on the INF file (for W7, it is named C7_81757)
5> Scroll down the file until you see a list like;
"ATI Radeon HD 2400 XT" = ati2mtag_RV610, PCIVEN_1002&DEV_94C1&SUBSYS_0D021002 "ATI Radeon HD 2900 PRO" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_30001002 "ATI Radeon HD 2900 XT" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_25521002
6> Add this anywhere between the entries you see above (does not have to be exact, just place this entry somewhere along the lines of the WHOLE list) "ATI Mobility Radeon HD 4570" = ati2mtag_M9x, PCIVEN_1002&DEV_9553&SUBSYS_9033104D Congratulations, the display driver can now be installed ONLY VIA the HAVE DISK method.
7> Quick review on HAVE DISK method; Device Manager > Right Click ATI 4570 then Update Driver Software > Browse my computer > Let me pick a list of Device drivers... > Have Disk > (Now browse to the INF file you just edited, in this example; the C7_81757 inf file.) Install, voila, DONE.
8> Now, to get the CCC v9.2 (Can't get 9.6 yet), get Sony's ATI drivers, run it and click on CUSTOM install, NOT EXPRESS, install CCC only and anything that is mandatory (DO NOT INSTALL THEIR DISPLAY DRIVERS!!!) .Voila, CCC 9.2 function (which is the same as 9.6 essentially).
I believe this method works for NW series w/ ATI 4570 too.
I have a serious dillemma , I'm trying to install Windows 7 - 64 Bit on my 32-bit vista laptop.
I have a sony vaio fz290.
I burned the image of a 7077 build I downloaded from demonoid. Booted off of it and clicked install , and then I got an error about not having a Cd/Dvd drive device driver missing , I tried a lot of things and searched all over the internet.
A few things to ask as I'm desperate
What can I do to make this work ?
Do I have to format my comp for this to work or can I just update over the 32-bit installation
Update: NVIDIA released 197.44 drivers for notebooks(with OpenGL 4 support for Fermi GPU), GT300M only gets support up to 3.3
I used the same inf file(changing drivers' version and date, of course) and everything is working as expected. Just follow the same instructions if you wanna try. - 197.44 inf file and instructions: Midtown's 197.44 Instructions.zip (Mirrors: Megaupload, Hotfile) - NVIDIA's original drivers: Download for Windows 7(64-bit)
So I managed to install the new NVIDIA drivers for laptops, 197.16 on my VAIO F after modifying the inf file myself for a few hours. I'm no expert, but I guess it worked out fine.
Here's the link for inf file & instructions: Midtown's 197.16 Instructions.zip
Disclaimer: I'm not responsible for any hardware/software failure.
After testing the new drivers for 24hrs: - No flicker at low brightness - No uneven brightness after pressing the "Display Off" button - Fan not constantly running - "Normal" temperature compared to Sony's "certified" graphic drivers - No problems after sleep/restart........................
I own a Vaio FW series and I found that the Click to Disk Editor doesnt run at all as well as that the vaio update fail to update this particular application.
I have this "problem" since I got my Z. When I start vaio update 3 utility I get this error "messageID=0008" there are no updates for your model bla bla...
However when I go to vaio support page, there are some new updates for my Z590N model (new Bios, USB patch...)
I have downloaded new version of Viao Update utility 3.2.something but I had to uninstall my current version (3.1.something), which I did. However when I started this new setup message poped up "there is no previous version installed" - abort.
I have checked esupport page where is said if you have problems with Vaio Update 3, to download Sony Shared Library which suppose to contain vaio update utility), I run installation but it doesn't install Vaio Update 3
Now, I can live with this esupport page regular visit updates,
When I click "download all free updates" it says that they cant not be purchased because i do not have write access to the iTunes media folder. I do because I checked out all the folders and they say read and write, plus I can add music to the library from other sources than iTunes store without a problem.
I am using 15-n240tx laptop and I have installed windows 8 to it.After installing the drivers I still have a question mark for one driver as below. What should I do for this?
HP G662 Notebook running Windows 7 64 bit: Despite running all the troubleshooting advice from web I can find, my Windows Update will not work and has not worked since I replaced my hard drive about a year or so ago. No error messages appear.
I can't update my hp envy dv6-7392ef from windows8 to windows8.1. The update goes to 90% then reboot and say to me that the update can't apply with the error: 0xC1900101-0x40017.
All my drivers are update. I have no strange software.
Every time I start up my Extensa 4420, I get the following error message window:
"The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter. Please update your ATI graphics driver, or enable your adapter using the Displays Manager."
Why is this happening? If I go into the device manager, it says that the graphics adapter is working. If I tell it to check for updated drivers it says that the driver I have installed is the most current one. Everything seems to work fine on the computer. How can I stop the message from popping up every time?
I need to update my Pavilion laptop BIOS. I try to update by downloading driver (SP50879) but when I run this package, on Insyde Flash v4.0.0 form, I have an error :  CE file Size input error! my windows is 8.1 64bit.
After installation updates from Lenovo Update I always get  error "rundll" when I start system with message: There was a problem starting C:Program  The specified module could not be found.
I have new E531 with Windows 8 and after Windows Updates was all right.
I have hp envy 15 j007tu .....  When I download the bios driver from hp oficial site and intall it after completion of installation my pc restart and shows ''boot device not found 0f3 error'' .......
