I want to swap out the hard drives on it and it doesn't have an easy access panel on the bottom for the hard drive.
Anyone know where I can find a step by step procedure on how to replace the hard drive?
I have Dell XPS m1330, and I'm having problem to perform factory restore. At the moment I have windows server 2008 installed for testing purpose. When I tried to perform factory restore by running D:ToolsPCRestore.exe on the recovery partition, it fails when reformatting the harddrive (see screenshot below)
I then tried the other method by rebooting, and pressing F8 when dell logo appears. However I couldn't find a "System repair" menu in there.
Is there any other method I can try to perform factory restore?
i found this Vaio Z really cheap and want to upgrade the harddrive and RAM (it comes with only 1 GB of ram)
Will all PC 8300 1033 Mhz DDR3 Ram slots work ?
What specifications do i need to look for aobut the harddrive? -can i pop in a SSD drive
At last the day came.. after almost a month of waiting i got my new Z540 - very stylish and nice machine.. but unfortantly i noticed the top-panel (keyboard) seemed un-attached to the buttom.. see the pics:
here you can see the top-panel is unattached.
here you can see the top-panel "wobbles
Someone said the 6xx drivers work fine on the 5xx series if you extract them from the model wrapper, but looking at the drivers, it looks like some hardware is different.
The Sony site only lists a little amount of 64 bit drivers (they didn't used to list any about 6 months ago) but there are some hardware components that don't have 64 bit drivers listed and are different in the 6xx series.
Could I get everything 100% working on a Z540 with Vista or 7 64-bit?
How much battery power can you save with a good SSD for a Z540 ?
View 10 Replies View RelatedOn sonys site, what are the bios under? I found it once before, but can't now. I'm pretty use to Dell's drivers page, but I don't think Sony's is all that bad either.
View 4 Replies View RelatedI have just bought one Sony vaio Z - Model VGN-Z540 NCB( Series Nr: 3109242; PC Nr 28399382)- in Vietnam but it . My question is How can I know it is a real one or refurbished one? what site I can get information for this products?.
View 5 Replies View RelatedI just tried to install wiindows 7 on my z540, I already installed all drivers downloaded for sony's website, but the function keys still are not working.
View 3 Replies View RelatedThinking of buying a Vaio X from Conics for use in the UK. Anybody who has experience with this? They seem to ship it with an English Windows 7 version, keyboard in their base model is Japanese international however.
Still a good deal it seems at 760GBP+shipping for the Z540 with 64gb SSD.
I'm trying to upgrade my VAIO Z540 from Windows Vista Home Premium to Windows 7, but I am afraid of the incompatibility of the internal parts with the new system.
So, I would like to inquire if anyone has tried before and what results?
Also for the drivers, because I tried to search for it but unfortunately I have not found it. So I'll be grateful if you could help me to find them.
normally, when the battery power is low, PCs should go to 'standby/sleep mode' and save all current tasks in Memories. PCs will wake up and restore all previous tasks after plugging in AC power supply.
however, my z540 is weird, when the battery power is low, it does go to standby/sleep mode, but then it will wake up itself and go to standby/sleep mode again..Over And Over... until it runs out of all battery power. so all current opened operations will be lost, the only thing I can do to prevent form losing my job is to connect AC power supply immediately before the battery power is used up.
does any z owner encounter the same situation as mine?
Quote:
Originally Posted by hammerdown
My one week old z540 just did a freaky thing... One of the LED backlights (near center of screen) went on the blink a few times then came back on. It looked like a dark vertical stripe coming up from the bottom. I run at only 33% brightness in advanced power management, and I'm plugged into AC power.
I guess I've got a year (minus a week) to send in for repair if it continues to go blinky, and I'll be checking with my seller on their return policy. Overall I'm happy with my Z, but this combined with the battery drain issue (I loose 10% overnight) is making me regret buying VAIO.
The problem got waaay worse today, less than two weeks of use Now the whole screen goes completely black except 4 or 5 of the backlights and others that flicker randomly (see picture below). I can temporarily get it back to normal if I reboot or even close the lid. But if I change the brightness to anything but 100%, then whole screen goes dark.
what sort of memory should i purchase for the machine? i know it's ddr3 but what pin count?
View 6 Replies View RelatedThe following model has only 1 gig Ram
[url]
How easy/diificult to add RAM and what is the typical cost ?
Problem with my 2 week old sony vgn-z540 laptop.
Heres the problem:
When I try to use the brightness level in between LOW and HIGH, my LCD backlight would go off, and the screen would be dark and almost not visible at all. There are also vertical bars at random spots, stretching from the top of the screen to the bottom of the screen. I can only use it with either LOW setting or HIGH setting, nothing in between.
This problem just started on its own. I have not installed anything such as drivers or programs. No updates(was updated after the problem occured to try to fix it).
I love this laptop to death and has been the best laptop in the past 15 years. I would hate to see it go so I need this fixed.
I will update later with pictures when it gets dark here b/c the pictures now are not showing up with the bars.
Has anyone installed Windows 7 x 64 on your VGN-z540 laptop? I tried nvidia's web site, guru3d, sony etc. but I can't can't find drivers that Windows 7 will accept on my 540 laptop. Every other piece of hardware works including the intel video it natively detected. I can't seem to get it to recognize the nvidia driver. The driver won't install from setup. I can manually try to force it by selecting the device, update drivers, select manually but it says it wasn't the right driver even though it is the 64 bit driver for nvidia and it has the 9300m GS listed many many times in the list.
View 6 Replies View RelatedI am considering the two following models: SR290 and Z540. My question relates to the overall build quality of these models as well as battery life with the extended battery.
Basically Im deciding between these 2 and a lenovo. The lenovo is heavier than both, is well made, and has ridiculous battery life. Just curious as to how the sony's stand up over time.
how to get a service manual for TT, please. Or does anyone know how to clean the fan?
View 4 Replies View RelatedI want to remove some of the outer casing on my AR series Vaio to replace it with a new part, is their anywhere that i can download a service manual for an AR series vaio that shows me how to take one apart so that i can replace the plastic fascia ?
View 4 Replies View RelatedIs new Vaio Z can manual replace default sony ssd with 2.5' hard drive ?
If not, Can i manual replace dvd drive with second hard drive or it need special part, May it run at full speed SATA2, and can i boot from it ?
Unfortunately I woke up this morning to my Y410P stuck with the Lenovo logo and text saying "Preparing Automatic Repair". After a few moments it will say "Diagnosing your PC " and then "Repairing disk errors. This might take over an hour to complete." Then after a few seconds it restarts and everything happens again.
View 9 Replies View RelatedI recently (last month) sent my IdeaPad Y410p in to Lenovo for repairs due to the laptop not turning on, or repeatedly restarting at the BIOS screen. The laptop was repaired by Lenovo (they replaced the motherboard), and returned it to me. The laptop has worked great sincce then, except that the two USB ports on the right side and the headphone and microphone jacks do not work. I have reinstalled the audio drivers, twice, but have not reinstalled the chipset drivers at all, as I don't want to screw around with those untiol I no more about what I should do.
Lenovo Ideapad Y410P
I'm very stuck with my Y580, and I'll start by saying that I purchased the laptop about 1.5 years ago, and it came with Windows 8 installed. I didn't like Windows 8 so much, so I decided that I would get Win7. I also decided that I'd put it on an mSATA to speed things up. After doing so, I just formatted the boot partition on the older drive to use for storage. But I kept the recovery partition on there. Everything seemed to work fine until I was recently informed that I should update the BIOS. I followed all of the instructions from Lenovo in updating to the version 8.00, something like 89WW in the file name. Then recently I noticed my temps were realllly hot when gaming... and I don't play graphically demanding games. I monitored my temps and found out that my CPU (i73630QM) was running over 90°c when playing games like LoL, Dishonored, RIFT, Darksiders, and a few others, all on lower settings.
I did some googling about temps and a lot of people were saying that BIOS is often a culprit for high temps. Maybe you've already put two and two together, but it took me until this point to discover that the BIOS I had updated to is a Win8 BIOS, and I'm using Win7. I figured, this is probably a big part of my issue (and even if it's not going to solve the heat issue, I'd still like to have all my ducks in a row and have all my hardware/software/firmware compatible.
As we all very well know from the few years of tampering with these Y580s, the BIOS can't simply just be rolled back. But I figured there had to be a way. After googling around for some time, I ended up trying a few different things; editing the Config file for the earlier version of the Bios (which just resulted in another error and locked up the keyboard and mouse), I tried booting the BIOS image from a USB, but to no avail (I tried both booting from USB and also a force BIOS update, using the fn+B method, which I realize I may be doing incorrectly, as I am not entirely sure what I should name the ROM file... I can't boot windows to use ANDYSTOOL, so I named a bunch of different ROM files with different names that have worked for other people) ... so on and so forth...
The last thing I've tried was Restoring the BIOS to factory settings (within the BIOS) and now the computer will not boot windows. The Lenovo screen Posts, and Windows starts to load, freezes a moment, Blue Screens for a second, then reboots, saying that there is an issue with either Hardware or software, and gives me he option to either boot windows normally (which just results in the same thing again) or to run an automatic repair. I tried the automatic repair and it just sits on the "Preparing Automatic Repair" screen, and will do so for hours with no progress.
I just got my g500 yesterday (win8, i3) then I am installing autocad 2013 with 30 % battery so i plugged the power cord and remove the battery but after removing the battery it freezes occasionally and the installing of cad got stuck
So I shut down the comp by unplugging the cord, after turning it on it got stuck to a 'scanning and reparing drive (d) : 0%.
I tried something like the preparing automatic repair but after this it will be just a blank sreen for hours.. tried everything
Now that the new Sony Z is out, I think it would meaningful to get a sense of the boot time for this system under various scenarios.
If people could post the boot times of their Z with this information:
- Whether you're calculating the boot with all the bloatware untouched (factory settings), with the $50 Sony Fresh Start (which still has a couple unnecessary programs), a Clean Install, or a Manual Uninstall of all programs.
- And the size of your SSD or HDD. If it is an SSD, it would be nice to know if you can tell us have many SSDs are in the RAID 0 configuration as that affects the speed.
I think this would be very helpful not just for direct comparison, but as another factor to consider in whether to do a clean install, which takes more tech-savvy than some may have.
I recently got my Z 530N to repair some things with the keyboard, and I noticed that it's much louder than before. Before the repair, I could hardly hear anything even when playing a game, but now I can hear it clearly when i'm just surfing on the internet. Is there anything I can do about this?
View 7 Replies View RelatedI am trying to repair a ZD7000 series laptop. The initial problem was that it had a broken AC Jack. I got a new AC jack and soldered that in. While I was at it, I also got a 3.2GHz P4 out of another laptop to replace the one that was in this laptop.
Now the laptop does not pass the boot screen. It will just display the HP splash page, then reboot. No BIOS beeps. It does this on both AC power and battery.
I have tried different ram as well, with no luck.
if anyone has ever put any effort into removing all the crapware from the repair DVD's, to attempt to make their own fresh start?
I have started investigating the DVD's, but it would be quicker if someone had already attempted this and has information.
i have an 11.1" screen tx series, but the screen is cracked.
i have checked on various site, ebay store, and the cheapest i can get an oem replacement is around $300.
i am just wondering is it possible i can just buy any 11.1" netbook, and use its screen on the sony machine? since the netbook costs about the same as the lcd screen, and i can use the other parts too.