Sony :: Poor USB Copying Speed With New VAIO CW2
Mar 10, 2010
I've just purchased a VAIO CW2 (VPCCW2S1E) and did a format and fresh install of Windows 7 x64 to rid myself of all the bloatware. The problem is that copying to, from and between external USB flash/harddrives is now extremely slow - often a couple of hundred kb/s, and sometimes 2-3 Mb/s, when the speed should be 20 Mb/s+. I've had the drives for a while and they work flawlessly over USB 2.0 with other computers. I know that USB copying speed was normal before the format as I copied the Windowsdrivers folder to a USB harddrive, though that folder was only a few hundred Mb.
I assume I missed installing some USB chipset driver after the format, though I have installed the following:
1. IPS_Driver_1.0_10Q1_O_1.0.0.1030 (unsure what this is)
2. SATA_Driver_Intel_Non-RAID_8.9X64_E_8.9.4.1004
3. SFEP_Driver_Sony_8.0_10Q1_O_7_8.0.1.1 (unsure what this is)
The list of available drivers is here: [url]
I've installed Windows 7 on a fair number of computers and never had this problem; how typical then that it should happen on my own laptop
View 10 Replies
ADVERTISEMENT
Jan 26, 2010
Installed in my Vaio VGN-Z11XRN solid drive Intel X25-M. In all tests it shows one of the best performance results. 0
It should read up to 220mb/sec and write 70mb/sec. But not in my machine
Bios: hacked R4043
Drive firmware: 2CV102HD
ACHI mode is set.
OS: Windows7 x64
In my case I can see just 150mb/sec maximum.
Where is the bottleneck ?
Tried to test in my stationary comp. Intel P35 in AHCI mode. Read speed was about 200mb/sec
View 8 Replies
View Related
Jul 16, 2009
I have owned my Vaio Z21WN/B since april.
Over the last few months the graphics seem to have deteriorated dramatically, particularly when using the 'speed' mode. The laptop will not play any high definition videos (even with a resolution of just 720p as well!) remotely smoothly, videos which play without a hitch on my 7 year old Pentium 4 with 1gb of ram and 256mb graphics! In fact, graphics and the whole PC itself seem to run much more smoothly when using the 'stamina' setting. This really makes no sense in my mind. It's quite irritating and disappointing since I wanted to be able to attach this laptop to the 42inch plasmascreen with the HDMI cable and watch films!
I upgraded to a new driver to see if it would help (using one of the driver packs made by nautis/dox in the 'discoveries on Vaio Z hybrid graphics' thread) but it has not helped at all, just made the 'stamina' setting even slower!
Will I get around a complete re-instal to factory settings?
View 10 Replies
View Related
Apr 17, 2009
crappy video output of my lappy vaio NR17G.
CPU:c2duo T5450
GPU:inbuilt intel graphics media accelerator
RAM 1gb
[no heavy processes running when tested]
OS: vista home premium ....
see the crappy video displayed #SNAPSHOT# from a good Q video from youtube :
I DID FULL SCREEn > [url]
YOUTUBE LINK : metallica live
[url]
I CHECKED IN MY DESKTOP(with P4 ,512mb ram,ASUS P5v motherboard, inbuilt graphics card) IT PLAYS SMOOTH... SEE THE SQUARES IN THE IMAGE EDGES .
aLSO- > lappy displays badly any video less than DVD Q video,played with VLC or whatever [good in dvd rip AVI files] see squares etc..
i loaded ffd show too for vlc but no use .. the video comes with squares if it is a little poor.
View 4 Replies
View Related
Apr 8, 2009
Ive had a vaio Z 2.53Ghz for a few months working very well. Lately Ive been noticing that the system feels really slow. I just ran a CPUZ and got the readings that the CPU is operating at 1/2 speed (around 1.26Ghz). I ran a few benchmarks (SySoft Sandra/Everest) and was confirmed again that the system is running at 1/2 speed. I remember that runnig on batteries usually the CPU slows (lower CPU multiplier) down to conserve batteries but mine is plugged-in and it does not make any difference. I opened it up and took out the CMOS battery for a few seconds to re-set the BIOS to see if that would fix it. Same problem.
Also I noticed that my power settings Tab incontrol panel are all grayed out so I cannot change or access them... this is all so weird... I know that setting power settings in XP's to the maximum performance profile, turn off Intel SpeedStep which is what I suppose is forcing my system to permanently using a lower multiplier...
View 10 Replies
View Related
Feb 25, 2010
how can i change my speed of fan on my sony vaio FW laptop, any programs i can use.
View 9 Replies
View Related
Mar 26, 2010
While eagerly scouting the Zs, I've greatly enjoyed this forum for the past few weeks. I've been stopping by (ok stalking) my local Sony Style store to check them out in person, and became curious about a discrepancy.
Does anyone know off hand if there is an inherent memory speed or bandwidth difference between the 520m and 540m (or 620m)? I haven't noticed anything official from Intel or the Sony specs, other than they all use DDR3/1066 sticks.
Last week I snapped a picture (rather fuzzy cellphone, sorry) of the WEI screen for the lone silver GX/S (i5-520m) floor model. It shows a lagging score of 5.9 on memory, which doesn't jive with other performance scores mentioned on this forum (that I could find).....
View 10 Replies
View Related
Jan 3, 2010
Does anyone know the speed of the SD card reader on Vaio TT? I am planning to run the Windows 7 from the HDD; and run Ubuntu from the flash card that I will be putting on that reader
View 10 Replies
View Related
Apr 7, 2009
I just received my z690 cto and I'm doing all the tests I can think of to check that everything is working properly.
I have one question about the memory.
I ordered it with 4GB ddr3 working at 1066Mhz and when I run the program cpuz the memory is recognized as DDR3 PC3-8500F but the "DRAM Frequency" is reported as 532 Mhz (instead of 1066).
Can anyone tell me if it is normal or if it should report 1066?
View 3 Replies
View Related
May 9, 2009
It seems for some reason my Z690 does not work well in the speed setting. This results into videos that seem to refresh a lot, games that are slow and have jagged edges and in general slow video performance.
Whats funny is that on stamina setting, all my graphics actually do quite well. Videos play fine as do the games /w smooth edges
View 9 Replies
View Related
Feb 12, 2009
Does any else have this feature working under Windows 7?
I have everything functioning (incl. FN brightness and volume controls) in my partitioned install except this.
I have the switch itself set to "Stamina" but neither mode even brings up the little green light beside it. It is completely unresponsive.
View 10 Replies
View Related
Aug 8, 2009
I have a VAIO VGN-SZ55GN but I found out that I can't switch between speed/stamina mode.
I had had the intel graphic driver installed automatically after I'd installed a new OS onto the laptop but I can't get the nVidia driver to work.
I tried shutting down the laptop, moved the switch to speed and turned on the laptop again but I still can't get the laptop started up w/ nVidia graphic card.
View 7 Replies
View Related
Feb 1, 2010
I have a sony vaio Z, its the vgn-z650n. I have it loaded with Windows 7 Ultimate.
I am having a strange issue with the wireless. I will have sudden speed decreases and/or the internet will stop all together.
The wireless connection is never actually dropped. When I have it hooked up with ethernet, it works perfectly fine with no issues
View 10 Replies
View Related
Mar 10, 2010
I have a Sony Vaio VGN-Z590 with windows 7 32 bit professional installed. When I switch to speed mode and hook up a monitor (24" dell LCD) via HDMI->DVI the graphics card temperature goes up to around 80-95C (measured with real temp 3.40) and the CPU temp also goes up into the 60-70s. No programs are using the CPU heavily. During this process the fans go up to max and the computer gets really loud. I have all the latest drivers installed and the latest BIOS.
I was wondering if anyone else has a problem like this? Would installing 64 bit windows 7 be better? It makes it really noisy when I hook up a monitor via HDMI. Any ideas?
Everything is perfect in stamina mode, low temps, low cpu usage.
View 3 Replies
View Related
Feb 17, 2010
Does anyone know what the speed is of the iLink port on the new Sony Vaio Z Series Core I7?
I'm trying to decide whether to get the Vaio Z with 3 usb ports or 2 usb ports and 1 iLink port. If the iLink port is a lot faster then the usb ports i'll probably get it with an ilink port. If it's a slow ilink port (400 mbps) then i'll probably get the laptop with 3 usb ports.
It would be nice if it comes with a fast ilink port (800mbps) so i can get a faster connection if i connect the laptop to an external hard drive.
View 8 Replies
View Related
Nov 9, 2009
just can't seem to get my Brightness controls to work in speed mode in windows 7.
I've tried 169.09, 180.70 and the most recent forceware drivers.
I've installed the registry file that was recommended in one thread.
I've tried all kinds of orders. Still, nothing.
I've currently installed (in this order)
SPEF
SonyPI
Shared Library
SonyUtils DLL
Event Service
The Registry Patch
NVIDIA Drivers
They work fine in STAMINA, but not in SPEED. I can't even access them through Windows Mobility Center or Power Options. I can change them a very small amount though the NVIDIA control panel through the "adjust color settings" tab. Otherwise, theres no mobility options in the NVIDIA panel.
View 5 Replies
View Related
Nov 9, 2009
I have had some strange things happen on my Sony Vaio SZ.
I returned from holiday (two days away) and brought my SZ back up from hibernation mode. It hung after I logged in. Rebooted it, and it came back after I put the battery back in and disabled wifi. Not that these actions indicate a problem with either wifi nor the battery (which died back in 2006).
However, it is running rather slowly. I installed the benchmark programme called Performance Test, ( http://www.passmark.com/products/pt.htm ) from an Australian company. It informed me that the T2600 (2.16Ghz) was actually running at 1.006Ghz. On top of this it gave an overall performance rating of 276, which is extremely poor for a Vaio SZ.
The original Sony Windows XP installation was removed a long time ago and an OEM XP Pro and SP3 was installed with a selection of specific drivers for the Vaio SZ components.
View 10 Replies
View Related
Mar 12, 2010
I've just installed Windows 7 Ultimate 64bit on my Vaio Z11MNB. As Google told me there is a problem with the FN + F5/F6 brightness adjust in speed mode.
All Sony software ist installed correctly and in the newest version I found.
As in many threads mentioned I followed the right order. But I still cannot adjust the brightness in speed mode
This thread Problem with Vaio Z Windows 7 brightness lead me to the right graphic drivers I thougt... Okay these drivers[url] are for the ZD790 but this shouldn't matter it's the same 9300GS chipset...
The following sony software is installed:
SETTING_UTILITY_SERIES_5.1_5.1.0.11200
SFEP_DRIVER_SONY_8.0_10Q1_O_7_8.0.1.1
SPIC_DRIVER_8.0_09Q3_7_8.0.1.1
SONY_SHARED_LIBRARY_5.5_5.5.0.10160
VAIO_CONTROL_CENTER_4.1_4.1.0.10160
VAIO_EVENT_SERVICE_5.1FH_5.1.0.12010
VAIO_POWER_MANAGEMENT_5.0_5.0.0.11300
VAIO_SMART_NETWORK_3.1_3.1.0.11250
Another smaller problem: From time to time there is a yellow exclamation mark at the SD-Hostcontroller in the device manager. I've googled a lot but there seems to be no other driver than the windows included. VEN_1180&DEV_0822
View 4 Replies
View Related
Dec 23, 2009
In addition to having a bad hard disk (after less than a year of ownership it totally failed, corrupted data, bla bla bla), the welds on the palm rest screw posts (see picture attachment) have come undone. I have been able to fix this for the time being with krazy glue, but it's not perfect. Furthermore, because of this, the plastic piece on the CD drive side broke at the incredibly flimsy joint with the main carbon chassis. Also fixed for the time being with krazy glue.
The touchpad comes on reversed from time to time, there's a ton of bloatware installed by default, no official 64bit support (although I was able to get it working with help from this forum), bla bla bla. My friends think all of this is hillarious, as I "overpayed" for a Sony that has been a real bear in terms of quality.
I can't complain about the design, weight, battery life, gorgeous screen, or performance however... but the quality issues are canceling out the positives, I'd say overall it's impossible to give the SZ6 a better grade than a B: it's a pleasure to lug around (I'm moving around every day) but the poor quality means you can never relax.
View 6 Replies
View Related
Jan 4, 2009
I recently purchased an FW285D and its been great thus far.. I have been noticing issues with the wireless signal however. I have a dell inspirion 9300 also and it uses intel wireless... MY sony however is currently using the vista wireless system but i did see some intel wireless programs lying around.
Anyway basically when im upstairs in the house the internet cuts in and out constantly.. showing my network then saying its not available. 3 Other people use laptops in the house and they have no problems whatsoever including my dell.. I have it sitting beside my sony and it will stay connected while my sony keeps on having to reconnect. Its truly annoying. Its weird because it shows the wireless signal of my neighbours houses at a higher strength than my own connection and also has them ALWAYS up. No one else in my house gets this problem so i doubt it has something to do with my actual wireless router... which is a linksys WRT300N.
Does anyone have any ideas.. Will the intel wireless be better.. if i double click on the .exe file in my common(ifrmework) folder it just says i need to reinstall the program and restart.....
View 7 Replies
View Related
Aug 18, 2009
I own this VGN-FZ340E notebook. The Cam quality is poor.
Q.1. I wanted to know if others face the same problem as mine or it's only with my notebook?
Q.2. How can I improve Cam Quailty? Is there any software that can enhance it?
View 4 Replies
View Related
Dec 19, 2009
recently i have freshly installed my vista ultimate operating system. today when i was trying to copy a file from my F drive to I drive it gave me
warning "Destination Folder Access Denied". then curiously i tried to another drive and found that all of the drive is restricted.
i require to do couple of more click to copy or transfer files from one to another. how can i get rid of this problem and why it's happening?
View 10 Replies
View Related
Feb 20, 2013
I recently purchased an Inspiron 17R SE and have been trying to move all my files, music, videos, etc. from my old desktop PC.
I've successfully transferred about 750GB of data to my USB3.0 backup drive. Â When I plug it into my new laptop, it appears fine and I can start copying files from it. Â However, after about 5 minutes of copying, it stops and the Windows Explorer windows close. Â If I try again, it copies fine for 5 minutes then everything stops again.
I've tried plugging the drive into different ports but the same problem occurs. Â I've also tried plugging it into a different PC and I can copy the files no problem.
View 1 Replies
View Related
Feb 15, 2009
I am trying to copy some dmg files from my mbp to an external hard drive (a western digital 1tb essential, and a 250gb wd passport). I get this "error code 0" when I try to copy the files larger than 4gb. Now I heard that this is because it is a fat32 drive or something like that. Is there a way to fix this without buying a different hard drive?
View 6 Replies
View Related
Feb 13, 2009
I got a new computer and I transfered my iTunes library already and sync'd my iPod to my new computer. I was wondering if there is a way I can get the playlists and ratings from my old computer to my new one.
I already tried this but it didn't quite work out as advertised for me. Is there a quick, easy way to get just the playlists and ratings over to my new computer?
View 5 Replies
View Related
Jun 23, 2014
What's the best way to move everything from my current t540p to the new one? Both have same OS, win7. I was thinking of backing up on USB external hard drive and then restoring?
View 5 Replies
View Related
Oct 6, 2014
The battery of my Acer Aspire v5 died while it was copying files over wireless. The batter was very low, but i thought that i could squeeze in the file copy any ways. Well, I was wrong. The battery died, and now it refuses to charge. When i try to turn it on, the battery light flashes 5 times and it does NOT turn on.
View 5 Replies
View Related
Mar 29, 2009
Unfortunately the internal keyboard and mouse on my MBP seem to have packed up for good. Fortunately, I can still use a USB keyboard and mouse.
Is there any way I can copy the entire contents of the hard disk onto an external USB hard disk (everything so that I don't lose desktop icons, filing structure e.t.c.) and then restore it when I get a new machine?
View 6 Replies
View Related
Apr 19, 2013
my Inspiron 1545 dvd/cd player has stopped copying and ejects the disc everytime i try!!
View 2 Replies
View Related
Jan 1, 2010
When I try to rip a CD, I'm getting some very slow rip speeds. Here's what I'm using:
Windows 7
Winamp Pro 5.571 & Windows Media Player 12
Sony Vaio Intel® Core™ 2 Duo P7450 (2.13GHz)with Intel® Centrino® processor with Blu-ray Disc(which seems to be a Pioneer BD?), 4GB RAM.
Lame version seems to be 3.98
View 10 Replies
View Related
