Does any else have this feature working under Windows 7?
I have everything functioning (incl. FN brightness and volume controls) in my partitioned install except this.
I have the switch itself set to "Stamina" but neither mode even brings up the little green light beside it. It is completely unresponsive.
I have a VAIO VGN-SZ55GN but I found out that I can't switch between speed/stamina mode.
I had had the intel graphic driver installed automatically after I'd installed a new OS onto the laptop but I can't get the nVidia driver to work.
I tried shutting down the laptop, moved the switch to speed and turned on the laptop again but I still can't get the laptop started up w/ nVidia graphic card.
I have my destop wallpaper/background set to change every 30 minutes, pulling from the entire picture library (which is a few gigabytes). I have noticed that every now and then...say, maybe 10-20% of the time. The desktop background goes completely black after the switch. This happens whether the switch is set to Auto or I manually flip the switch (which makes sense, actually).
The only thing that restores the picture to view is logging off and back on. None of the following have any impact or cause the picture to display:Right-clicking on the desktop and selecting.....
Since I installed the new driver of Windows 7 for my Z, I have some wierd problem in Stamina mode (see attached photo). I wonder if someone has the same problem. I installed the driver in the same time that I update my Z's RAM to 6GB (bought a 4GB). It may be my new RAM, but I don't have any problem in Speed mode, no error with Memtest, and no BSOD either.
View 10 Replies View RelatedI recently replaced the fan on my VGN-SZ360P. It was hell, I had to remove everything just to get to it. After a few hours I was able to piece everything back together. Now my Speed switch doesn't work. I need the Speed switch to use the DVI port on my port replicator to out to my external monitor. Seems like it is stuck on Stamina mode. In order to use the DVI port I need to be in Speed mode and with the nVidia graphics card. I tried to uninstall and reinstall everything. Nothing seems to work. I contact Sony and the tech told me to do a system restore. That is going to wipe out my entire computer to factory default.
View 10 Replies View RelatedI can run in safe mode and in stamina mode all day long, however when I switch to Speed mode after a few secs the screen goes black and the notebook just turns off. Anyone have any ideas? I am at a total loss. I have tried a complete restore and also tried Natius drivers.
View 7 Replies View Relatedjust can't seem to get my Brightness controls to work in speed mode in windows 7.
I've tried 169.09, 180.70 and the most recent forceware drivers.
I've installed the registry file that was recommended in one thread.
I've tried all kinds of orders. Still, nothing.
I've currently installed (in this order)
SPEF
SonyPI
Shared Library
SonyUtils DLL
Event Service
The Registry Patch
NVIDIA Drivers
They work fine in STAMINA, but not in SPEED. I can't even access them through Windows Mobility Center or Power Options. I can change them a very small amount though the NVIDIA control panel through the "adjust color settings" tab. Otherwise, theres no mobility options in the NVIDIA panel.
my laptop,VGN-Z720D/B, can't switch to speed mode without restarting computer, which means I need to switch mode by turning off or restarting the laptop, I updated the BIOS and graphic drivers and reinstalled the whole OS by using recovery disc, it still doesn't work. Is it possible the hardware problem?
View 3 Replies View RelatedDoes anyone know if there is a way to switch from stamina to speed on the Sony VGN-SZ450N without the external switch? I think my switch is broken
View 4 Replies View RelatedIve had a vaio Z 2.53Ghz for a few months working very well. Lately Ive been noticing that the system feels really slow. I just ran a CPUZ and got the readings that the CPU is operating at 1/2 speed (around 1.26Ghz). I ran a few benchmarks (SySoft Sandra/Everest) and was confirmed again that the system is running at 1/2 speed. I remember that runnig on batteries usually the CPU slows (lower CPU multiplier) down to conserve batteries but mine is plugged-in and it does not make any difference. I opened it up and took out the CMOS battery for a few seconds to re-set the BIOS to see if that would fix it. Same problem.
Also I noticed that my power settings Tab incontrol panel are all grayed out so I cannot change or access them... this is all so weird... I know that setting power settings in XP's to the maximum performance profile, turn off Intel SpeedStep which is what I suppose is forcing my system to permanently using a lower multiplier...
I have a Sony Vaio VGN-SR38 and I can't get the switch mode to work.
When I click the "mode" button or the "setting" button, nothing comes up... none of the button seems responsive.
Vista Ultimate 32-bit
I have a VAIO SZ-650N/C laptop and I cannot turn on wireless. The switch doesnt work, switching it in the on and off position doesnt light up the WLAN indicator and every time i try to connect to the internet it says "Please turn on the hardware switch and try again"
View 3 Replies View Relatedhow can i change my speed of fan on my sony vaio FW laptop, any programs i can use.
View 9 Replies View RelatedYesterday a sony partner changed the mainboard in my z. Vista runs fine but the z didn't power off! When i shutdown the system it will reboot!
Hibernation and Standby also doesn't work - the screen went black, hdd is working and after a few seconds the desktop is back!
What can i do? I've tested some of the recovery points without success.
Same problem when starting in safe mode!
For information: when shut down in the bios everything is ok, also when booting from an ubuntu cd!
There must be a way to fix this - i hope without doing a system restore from the dvds....
Can I adjust the brightness to maximum value or any value when in stamina mode on the Z ?
View 3 Replies View RelatedWhile eagerly scouting the Zs, I've greatly enjoyed this forum for the past few weeks. I've been stopping by (ok stalking) my local Sony Style store to check them out in person, and became curious about a discrepancy.
Does anyone know off hand if there is an inherent memory speed or bandwidth difference between the 520m and 540m (or 620m)? I haven't noticed anything official from Intel or the Sony specs, other than they all use DDR3/1066 sticks.
Last week I snapped a picture (rather fuzzy cellphone, sorry) of the WEI screen for the lone silver GX/S (i5-520m) floor model. It shows a lagging score of 5.9 on memory, which doesn't jive with other performance scores mentioned on this forum (that I could find).....
Does anyone know the speed of the SD card reader on Vaio TT? I am planning to run the Windows 7 from the HDD; and run Ubuntu from the flash card that I will be putting on that reader
View 10 Replies View RelatedI just received my z690 cto and I'm doing all the tests I can think of to check that everything is working properly.
I have one question about the memory.
I ordered it with 4GB ddr3 working at 1066Mhz and when I run the program cpuz the memory is recognized as DDR3 PC3-8500F but the "DRAM Frequency" is reported as 532 Mhz (instead of 1066).
Can anyone tell me if it is normal or if it should report 1066?
I've just purchased a VAIO CW2 (VPCCW2S1E) and did a format and fresh install of Windows 7 x64 to rid myself of all the bloatware. The problem is that copying to, from and between external USB flash/harddrives is now extremely slow - often a couple of hundred kb/s, and sometimes 2-3 Mb/s, when the speed should be 20 Mb/s+. I've had the drives for a while and they work flawlessly over USB 2.0 with other computers. I know that USB copying speed was normal before the format as I copied the Windowsdrivers folder to a USB harddrive, though that folder was only a few hundred Mb.
I assume I missed installing some USB chipset driver after the format, though I have installed the following:
1. IPS_Driver_1.0_10Q1_O_1.0.0.1030 (unsure what this is)
2. SATA_Driver_Intel_Non-RAID_8.9X64_E_8.9.4.1004
3. SFEP_Driver_Sony_8.0_10Q1_O_7_8.0.1.1 (unsure what this is)
The list of available drivers is here: [url]
I've installed Windows 7 on a fair number of computers and never had this problem; how typical then that it should happen on my own laptop
It seems for some reason my Z690 does not work well in the speed setting. This results into videos that seem to refresh a lot, games that are slow and have jagged edges and in general slow video performance.
Whats funny is that on stamina setting, all my graphics actually do quite well. Videos play fine as do the games /w smooth edges
I have a sony vaio Z, its the vgn-z650n. I have it loaded with Windows 7 Ultimate.
I am having a strange issue with the wireless. I will have sudden speed decreases and/or the internet will stop all together.
The wireless connection is never actually dropped. When I have it hooked up with ethernet, it works perfectly fine with no issues
I have a Sony Vaio VGN-Z590 with windows 7 32 bit professional installed. When I switch to speed mode and hook up a monitor (24" dell LCD) via HDMI->DVI the graphics card temperature goes up to around 80-95C (measured with real temp 3.40) and the CPU temp also goes up into the 60-70s. No programs are using the CPU heavily. During this process the fans go up to max and the computer gets really loud. I have all the latest drivers installed and the latest BIOS.
I was wondering if anyone else has a problem like this? Would installing 64 bit windows 7 be better? It makes it really noisy when I hook up a monitor via HDMI. Any ideas?
Everything is perfect in stamina mode, low temps, low cpu usage.
Does anyone know what the speed is of the iLink port on the new Sony Vaio Z Series Core I7?
I'm trying to decide whether to get the Vaio Z with 3 usb ports or 2 usb ports and 1 iLink port. If the iLink port is a lot faster then the usb ports i'll probably get it with an ilink port. If it's a slow ilink port (400 mbps) then i'll probably get the laptop with 3 usb ports.
It would be nice if it comes with a fast ilink port (800mbps) so i can get a faster connection if i connect the laptop to an external hard drive.
I have had some strange things happen on my Sony Vaio SZ.
I returned from holiday (two days away) and brought my SZ back up from hibernation mode. It hung after I logged in. Rebooted it, and it came back after I put the battery back in and disabled wifi. Not that these actions indicate a problem with either wifi nor the battery (which died back in 2006).
However, it is running rather slowly. I installed the benchmark programme called Performance Test, ( http://www.passmark.com/products/pt.htm ) from an Australian company. It informed me that the T2600 (2.16Ghz) was actually running at 1.006Ghz. On top of this it gave an overall performance rating of 276, which is extremely poor for a Vaio SZ.
The original Sony Windows XP installation was removed a long time ago and an OEM XP Pro and SP3 was installed with a selection of specific drivers for the Vaio SZ components.
I've just installed Windows 7 Ultimate 64bit on my Vaio Z11MNB. As Google told me there is a problem with the FN + F5/F6 brightness adjust in speed mode.
All Sony software ist installed correctly and in the newest version I found.
As in many threads mentioned I followed the right order. But I still cannot adjust the brightness in speed mode
This thread Problem with Vaio Z Windows 7 brightness lead me to the right graphic drivers I thougt... Okay these drivers[url] are for the ZD790 but this shouldn't matter it's the same 9300GS chipset...
The following sony software is installed:
SETTING_UTILITY_SERIES_5.1_5.1.0.11200
SFEP_DRIVER_SONY_8.0_10Q1_O_7_8.0.1.1
SPIC_DRIVER_8.0_09Q3_7_8.0.1.1
SONY_SHARED_LIBRARY_5.5_5.5.0.10160
VAIO_CONTROL_CENTER_4.1_4.1.0.10160
VAIO_EVENT_SERVICE_5.1FH_5.1.0.12010
VAIO_POWER_MANAGEMENT_5.0_5.0.0.11300
VAIO_SMART_NETWORK_3.1_3.1.0.11250
Another smaller problem: From time to time there is a yellow exclamation mark at the SD-Hostcontroller in the device manager. I've googled a lot but there seems to be no other driver than the windows included. VEN_1180&DEV_0822
I've installed Windows 7 64 bit on my Vaio VGN-FZ340E.
As this notebook comes with Vista Home Premium 32 bit, I had to find the drivers for 64 bit. So far so good, since the Vista 64 bit drivers work fine. (PS: It took some time to get all the drivers). Everything is working except for two things: the S1 button and the Wireless Device Switch.
I want to disable the bluetooth, because I don't use it all the time and it takes a lot of battery when enabled. I used to disable it using this little application from Sony called Wireless Device Switch.
The problem is that this application does not have the bluetooth option anymore.
I have VGN-SZ450n.
I've installed
The one control/utility file
The 4 System component files
the 3 wireless files
It recognized the intel wireless from the beginning under hardware however even after installing all those files and rebooting I can't get it to recognize the switch is turned on for the wireless. In smartwi it says they are turned off. Is there a software way of turning them on?
I just installed windows 7 on my SR190. The fn volume keys work but my brightness keys don't. Also, the vaio mode switch isn't starting up. something about application failure. Is there a specific order for the driver installation?
View 4 Replies View RelatedIt seems my VGN-Z21WN wifi module is dead. Whenever I put the wireless switch on "ON", the led never lit up
Is this known issue ? Is there something I could try before sending it to Sony support center ?
I can't seem to change the brightness level in Speed Mode, be it through Fn keys or Power Option on the laptop. I've tried disabling UAC and running VESMgr.exe and VESMgrSub.exe as administrators. And still can't alter the brightness level. Everything else works, just the brightness option won't work in Speed Mode. Stamina Mode works flawlessly, giving me the option the change the brightness level how I want.
View 10 Replies View Related