I have VGN-SZ450n.
I've installed
The one control/utility file
The 4 System component files
the 3 wireless files
It recognized the intel wireless from the beginning under hardware however even after installing all those files and rebooting I can't get it to recognize the switch is turned on for the wireless. In smartwi it says they are turned off. Is there a software way of turning them on?
I've installed Windows 7 64 bit on my Vaio VGN-FZ340E.
As this notebook comes with Vista Home Premium 32 bit, I had to find the drivers for 64 bit. So far so good, since the Vista 64 bit drivers work fine. (PS: It took some time to get all the drivers). Everything is working except for two things: the S1 button and the Wireless Device Switch.
I want to disable the bluetooth, because I don't use it all the time and it takes a lot of battery when enabled. I used to disable it using this little application from Sony called Wireless Device Switch.
The problem is that this application does not have the bluetooth option anymore.
I have an HP Pavilion m6 running Windows 7 Home Premium.
My workplace installed a router a few months ago. It's a Cisco E2000. My laptop will not recognize the wireless signal from the router. It recognizes about 10 other wireless signals from other locations outside the office. My phone also recognizes the router and can connect to it no problem. I've installed all the updates for Windows 7 and for the HP laptop. I've also installed the latest driver for the wifi card in the laptop.
Why the laptop does not recognize the wifi?
My wireless switch on my Z seems to not function.
When I turn it off, I maintain my wireless connection. The light turns off, but my connection maintains.
i have been having an issue that has me perplexed, i recently did a clean install to windows 64 bit, and now i cannot seem to get the intel wirless client to work, it will only let me use the windows wireless client. I downloaded the latest drivers and utilities and software, both from the intel website and the dell site, installed both, but does not allow me to use the intel wireless client. what I am not doing correctly to activate the intel wireless client.
View 9 Replies View RelatedI have a VAIO SZ-650N/C laptop and I cannot turn on wireless. The switch doesnt work, switching it in the on and off position doesnt light up the WLAN indicator and every time i try to connect to the internet it says "Please turn on the hardware switch and try again"
View 3 Replies View RelatedI have an SR290 and recently I had a problem with the wireless. The wireless switch at the bottom left corner does not seem to work; when I move it to the ON position, the LED does not light up green to say that it is working. In the Device Manager, the wireless device does show up, and I can disable/enable it, and it indicates that the wireless card is still functioning. Under network connections, the network connection does show up, but it cannot detect any wireless networks. My other devices can pick up the wireless signals.
View 5 Replies View RelatedI've been searching around for Sony's Wireless Switch Settings Utility for my vaio z26gn, the Sony site doesn't seem to have them. Where can I download this utility?
View 8 Replies View RelatedLaptop: Sony Vaio TZ31VN
Integrated Globetrotter HSDPA Wireless WAN, Bluetooth and Intel 4965AGN Wireless LAN, Windows XP SP3 (Official Sony XP Downgrade Build)
This one really has me stumped - I'd appreciate any suggestions!
In summary, I have a problem with my Sony VAIO TZ31 wherein I'm unable to use my WiFi. The Wireless Device Switcher utility (C:Program FilesSonyWireless Switch Setting UtilitySwitcher.exe version 4.0) no longer 'sees' my integrated WLAN card to give me the option of turning it on or off, however it does see both the Bluetooth and WWAN cards. The hardware switch on the front of the laptop is in the 'ON' position, and the Bluetooth and WWAN lights are illuminated, however the WLAN light isn't, and I can find no way of enabling it. The Bluetooth and WWAN are still working.
My problem determination so far:
The normal Windows Wireless Network Connection dialogue tells me immediately (i.e. doesn't seem to scan at all) that it can't find any networks and that I should check that my wireless is turned on. I have another several devices in the house that are seeing the network just fine, as does my iPhone right next to this laptop.
Running an `IPCONFIG ALL` from the command line suggests that it is physically still there:
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) Wireless WiFi Link 4965AGN
Physical Address. . . . . . . . . : 00-1D-E0-C3-xx-xx
Checking in Windows Device Manager the `Intel(R) Wireless WiFi Link 4965AGN' entry appears with no question marks or exclamation marks telling me there's a problem or that the device is disabled. Opening up the properties dialogue for this, the drop down box on the Advanced tab says 'Wireless On'. All other properties are on the default values....
It seems my VGN-Z21WN wifi module is dead. Whenever I put the wireless switch on "ON", the led never lit up
Is this known issue ? Is there something I could try before sending it to Sony support center ?
Does any else have this feature working under Windows 7?
I have everything functioning (incl. FN brightness and volume controls) in my partitioned install except this.
I have the switch itself set to "Stamina" but neither mode even brings up the little green light beside it. It is completely unresponsive.
I just installed windows 7 on my SR190. The fn volume keys work but my brightness keys don't. Also, the vaio mode switch isn't starting up. something about application failure. Is there a specific order for the driver installation?
View 4 Replies View RelatedI got a second hand Dell Inspiron 1525 about 2 years ago, it was working fine till the hard drive stopped workinga few months ago. i got a new hard drive and put that in and loaded software and Vista OS.Now the wireless card won't recognize the adapter.I have tried all different ways and adapters and it still won't work.
View 5 Replies View RelatedOnce I turn off the wireless switch, I can't seem to turn wireless capability back on without rebooting the machine. The wifi LED remains unlighted and 'diagnose and repair' attempts do not work (telling me to turn wireless capability on by flicking the switch, which is already in the ON position).
Has anyone else faced this issue?
Dell Latitude E6400
Windows Server 2008 x64 (fully updated)
Intel 5100 AGN (driver A02, latest as of today)
Dell Wireless 370 Bluetooth (driver A13 (6.2.0.6600), latest as of today)
I'm fixing a DV6000 for a friend, basically the wireless switch is disabling the wireless even when it's switched to the on position. I remember reading about a registry hack that can disable the switch, but I can't find it now.
View 4 Replies View RelatedI use a 6530b laptop and am not certain what buttons I'm supposed to press
View 1 Replies View RelatedI've got a DELL Inspiron 15 3542 . with Win7 64 bitsi downloaded all drivers from this sitewhen i try to install Bluetooth driver (Network_Driver_NT9P6_WN_6.30.223.99_A00) it shows an error message "Activate Bluetooth Using Wireless Switch" . i can't find a solution ....
View 3 Replies View RelatedI have this problem of wireless in my 15R 5537. I upgraded from windows 8 to 8.1 recently only to know that wireless driver was incompatible. I then visited the Dell support site and downloaded the wireless driver for the model i'm using and the OS installed. But when I tried to install it I got "Activate Bluetooth using wireless switch" error message.
I didn't know what wireless switch was since (fn+f2) was not working either. I came to know that there is wireless option in bios menu from various posts. But there was none in my laptop under "Advance" option in bios menu. I run bios version A08.
I tried to reinstall old windows 8(with a different CD this time) but wireless didn't work in this one either...
I keep getting the above msg when booting up this is an ongoing problem
HP Pavilion g6-2102au Notebook PC , Product Number: B9K03PA
I opened my Vostro 1400 some time ago to clean it out, and put it back together again carefully. I also reformatted it recently.
Ever since, the wireless switch at the front doesn't seem to do anything when I press it all the way to the right. Before, it would show all wireless APs in the area, and their signal strengths, on the screen.
Okay so my first question is this: Right now my wireless light is on showing that it's wireless, but if I close my laptop, or if it goes to sleep, and then I go back onto my laptop the wireless stops working and the light is off and it won't go on when I move the switch. I have a Aspire 5590
My second question is: I've hooked up a second monitor to my laptop I checked the settings and it works like this, if I move my mouse to the right and keep going, my mouse appears on the second screen. How can I make it so that the start menu and everything goes from the first to the second screen that way I can close my laptop, cause if I close my laptop screen it disables the second screen also/
My wireless card stopped working and I get the message that the radio is disabled. F2 is supposed to turn it on,but no longer does so. Tried reinstalling the wireless card driver, but that didn't work. I am told that I probably have a software conflict. How to find and correct the conflict?
View 2 Replies View RelatedI have a Lenovo t420s with dualboot win7 and Ubuntu. I never had any problems until now and could switch on/off my wireless and bluetooth connections via the Hardware Switch (right bottom left of the notebook) or via FN + F5.
However, without any specific reason the wireless and bluetooth was switched off and the the system tells me that I have to switch on WIFI via the Wireless Radio Switch. However, although I can move it, it doesn't make any difference for the Switch.
I tried to reset the BIOS to Default and changed the network settings, and also rebooted several times. I won't work with any of the two systems.
Has anyone with the SZ series got the wireless switching utility to work on windows 7. I got everything else to work except that. I tried both the vista driver and xp.
I don't use bluetooth so i prefer to turn it off. But when it's disabled the blue bluetooth light is still lit
I have just upgraded my Dell Inspiron 15 (N5010) from Windows 7 to Windows 8 Pro I need to update the ATI driver but Dell does not recognize the Windows 8 Pro OS. Dell only shows the 2 previous os's on my system Windows 7 and Vista. without the driver I am having problems viewing pages. Below is my system info
OS Name Microsoft Windows 8 ProVersion 6.2.9200 Build 9200Other OS Description Not AvailableOS Manufacturer Microsoft CorporationSystem Manufacturer Dell Inc.System Model Inspiron N5010System Type x64-based PCSystem SKU To be filled by O.E.M.Processor Intel(R) Core(TM) i3 CPU
[code]...
Windows 8.1 Pro does not recognize Touchsmart. This work like a mouse when I click on the display. In properties of system, says that won't have a pen and touch.
»HP ENVY 15t-j100 Quad Edition CTO Notebook PC (ENERGY STAR) Product Number: F5G56AAR
how to make the 4GB SD Card works? I tried the sd card on my other computer and has no problem. I searched the Internet, it seems that the vaio has a limitation up to 2GB only.
View 3 Replies View Relatedi am having problems with my finger print scanner.
i have an HP Pavilion dm4-3107tx Beats Edition Entertainment Notebook PC. it cannot recognize my windows password when i try to register my fingerprint for windows logon.
i know that the password that i've entered is correct and i have even tried logging in to HP SimplePass via my windows password.
i have tried lots of troubleshooting by following threads from this forum and also following instructions from the HP support website.
-i have an up-to-date BIOS
-my SimplePass version is 6.0.100.276 (latest)
-my biometrics device driver version is 3.4.4.84 (latest)
I have an HP Elitebook 8530w with Windows 7 32-bit. I did not buy this laptop, it was a gift from a friend. I have gotten recently, just a few days ago. I have not used the fingerprint sensor previously before today. I went on the HP site and went to get the driver for the fingerprint sensor. Here is the link to that page. I tried to install the AuthenTec Fingerprint Sensor Driver but it did not work, it said the installation process was interuppted and to try again later. So I tried again later and the same happened. So I uninstalled and checked to see if there were any later versions. I had not looked to see that the original one I installed from the drivers page was from March 17 2010.
I did some researching around and found version 6.0.100.272 of HP Simplepass (The AuthenTec Driver had HP Simplepass installation included). I installed this version and it worked. I opened it up and it prompted me to enter my windows account password. So I did. I then clicked Set Up Windows Log On and it told me to enter my Windows password again. I did but it didn't work So I tried again... and again... and again... It didn't work no matter how many times I tried. I tried restarting my laptop and changing my account password. Neither worked. So I'm confused as to what could be the problem. I would very much like to use this feature.
I have an HP Pavilion dv4 Notebook running Windows 7 Home Premium and the USB ports worked fine for an HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB Device Not Recognized" and also indicated that the device attached to the computer has malfunctioned. This prompted me to buy a new Canon digital camera. Well, a new camera did not fix the problem. Now, anything connected to either of the 2 USB ports will not be recognized by my laptop.
I've tried the suggested Microsoft below:
1: For the issue with USB devices, uninstall and re-install all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition.The USB controllers represent the USB ports in Device Manager.
a. Click Start, type device manager in the Start search box and hit Enter.
b. Expand Universal Serial Bus controllers. Note: You might have to scroll down the list to find this item.
c. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
f. Check the USB device to see whether it is working.
This did not correct the problem. Then from device manager, I tried updating drivers on all the USB controllers and root hubs. While some may have received downloaded software updates, it still did not correct the USB device not recognized problem after restarting the computer.