Sony :: VAIO SZCPU Clock Speed Dropped From 2.16Ghz To 1.006Ghz
Nov 9, 2009
I have had some strange things happen on my Sony Vaio SZ.
I returned from holiday (two days away) and brought my SZ back up from hibernation mode. It hung after I logged in. Rebooted it, and it came back after I put the battery back in and disabled wifi. Not that these actions indicate a problem with either wifi nor the battery (which died back in 2006).
However, it is running rather slowly. I installed the benchmark programme called Performance Test, ( http://www.passmark.com/products/pt.htm ) from an Australian company. It informed me that the T2600 (2.16Ghz) was actually running at 1.006Ghz. On top of this it gave an overall performance rating of 276, which is extremely poor for a Vaio SZ.
The original Sony Windows XP installation was removed a long time ago and an OEM XP Pro and SP3 was installed with a selection of specific drivers for the Vaio SZ components.
View 10 Replies
ADVERTISEMENT
Aug 20, 2009
I ordered a FW490 CTO w/ P8700, 4650 1GB, 4GB RAM, Vista 64, etc. Anyways, I was a little disappointed with how well it ran Americas Army 3. I downloaded and ran GPUZ, and I got some interesting results... It says that my 4650 uses GDDR3 memory, which is apparently the best setup for the card, but it also reports that my clock speed is 450 MHz, and my memory clock speed is 600 MHz. From everything I have gathered, that is below what most 4650 Mobilitys are at... what gives? What are the speeds of everyone elses 4650?
View 10 Replies
View Related
May 12, 2010
Have a Vaio Z112 with the Nvidia 330M. I know this gpu should slow down to ~150mhz when only running 2D apps. Looking at nvidia system tools and nvidia precision tool mine always seems to run at the full 475mhz regardless of what I'm using.
Anyone else experience this? Did Sony write out the slow speeds in their drivers due to the assumption we would switch to intel graphics when needed?
In nvidia system tools there is an area that shows 2d/3d clock speed. normally you would expect to see ~150/475 there...I only see 475. Basically it looks like there is no 2d-only clock speed.
View 7 Replies
View Related
Jun 4, 2009
i am looking at dell laptop, inspiron vs latitude (both have lots of promotion going on recently)
according to wiki, both e6400 and e6500 can support ram clockspeed at 800mhz, but i can't find similar information about the inspiron models.
View 6 Replies
View Related
May 8, 2010
I was wondering why my CPU would go over its factory clock speed when i didn't even overclock it its kinda weird this is what its getting
View 3 Replies
View Related
Aug 11, 2014
Had a w540 for a few days and so far it'd be fine. At the weekend i used the laptop on battery for a long time and thus set the power-management low to conserve power.
However, today having switched back to power supply and setting power scheme to max performance the CPU is still concerving power.
Â
Its running (according to resource manager) at 29% and no matter how much i do it sticks at that percentage. The laptop does feel like its running at that clock speed too ... everything is super slow ... can watch programs drawing in the display...
View 2 Replies
View Related
Jun 7, 2014
I'm having trouble figuring out why on my T520, after upgrading from 8GB/1333Mhz to 16GB/1600Mhz Crucial RAM, Speccy/CPU-Z still says they're running at around ~660Mhz x 2 = ~1330?
Â
My specs are as follows:
Â
For my T520 (4239-CTO) I have...
Â
Processor: Intel Core i7-2860QM 2.5Ghz
RAM: Crucial 16GB (8GB x 2) DDR3-1600
GPU: Intel HD 3000 / NVIDIA QUADRO NVS 4200M
OS: Windows 7 Ultimate x64 SP1 (w/latest updates)
Â
After Googling for a while and from looking around here I've read nothing that says I shouldn't be able to run at 1600Mhz especially considering my processor supports that speed officially. Another post on this topic (not for the T520 specifically) mentioned that i7's contain the memory controller within itself. So... am I being thwarted by software settings in the BIOS or within my operating system?
View 3 Replies
View Related
Apr 8, 2009
Ive had a vaio Z 2.53Ghz for a few months working very well. Lately Ive been noticing that the system feels really slow. I just ran a CPUZ and got the readings that the CPU is operating at 1/2 speed (around 1.26Ghz). I ran a few benchmarks (SySoft Sandra/Everest) and was confirmed again that the system is running at 1/2 speed. I remember that runnig on batteries usually the CPU slows (lower CPU multiplier) down to conserve batteries but mine is plugged-in and it does not make any difference. I opened it up and took out the CMOS battery for a few seconds to re-set the BIOS to see if that would fix it. Same problem.
Also I noticed that my power settings Tab incontrol panel are all grayed out so I cannot change or access them... this is all so weird... I know that setting power settings in XP's to the maximum performance profile, turn off Intel SpeedStep which is what I suppose is forcing my system to permanently using a lower multiplier...
View 10 Replies
View Related
Feb 25, 2010
how can i change my speed of fan on my sony vaio FW laptop, any programs i can use.
View 9 Replies
View Related
Mar 26, 2010
While eagerly scouting the Zs, I've greatly enjoyed this forum for the past few weeks. I've been stopping by (ok stalking) my local Sony Style store to check them out in person, and became curious about a discrepancy.
Does anyone know off hand if there is an inherent memory speed or bandwidth difference between the 520m and 540m (or 620m)? I haven't noticed anything official from Intel or the Sony specs, other than they all use DDR3/1066 sticks.
Last week I snapped a picture (rather fuzzy cellphone, sorry) of the WEI screen for the lone silver GX/S (i5-520m) floor model. It shows a lagging score of 5.9 on memory, which doesn't jive with other performance scores mentioned on this forum (that I could find).....
View 10 Replies
View Related
Jan 3, 2010
Does anyone know the speed of the SD card reader on Vaio TT? I am planning to run the Windows 7 from the HDD; and run Ubuntu from the flash card that I will be putting on that reader
View 10 Replies
View Related
Apr 7, 2009
I just received my z690 cto and I'm doing all the tests I can think of to check that everything is working properly.
I have one question about the memory.
I ordered it with 4GB ddr3 working at 1066Mhz and when I run the program cpuz the memory is recognized as DDR3 PC3-8500F but the "DRAM Frequency" is reported as 532 Mhz (instead of 1066).
Can anyone tell me if it is normal or if it should report 1066?
View 3 Replies
View Related
Mar 10, 2010
I've just purchased a VAIO CW2 (VPCCW2S1E) and did a format and fresh install of Windows 7 x64 to rid myself of all the bloatware. The problem is that copying to, from and between external USB flash/harddrives is now extremely slow - often a couple of hundred kb/s, and sometimes 2-3 Mb/s, when the speed should be 20 Mb/s+. I've had the drives for a while and they work flawlessly over USB 2.0 with other computers. I know that USB copying speed was normal before the format as I copied the Windowsdrivers folder to a USB harddrive, though that folder was only a few hundred Mb.
I assume I missed installing some USB chipset driver after the format, though I have installed the following:
1. IPS_Driver_1.0_10Q1_O_1.0.0.1030 (unsure what this is)
2. SATA_Driver_Intel_Non-RAID_8.9X64_E_8.9.4.1004
3. SFEP_Driver_Sony_8.0_10Q1_O_7_8.0.1.1 (unsure what this is)
The list of available drivers is here: [url]
I've installed Windows 7 on a fair number of computers and never had this problem; how typical then that it should happen on my own laptop
View 10 Replies
View Related
May 9, 2009
It seems for some reason my Z690 does not work well in the speed setting. This results into videos that seem to refresh a lot, games that are slow and have jagged edges and in general slow video performance.
Whats funny is that on stamina setting, all my graphics actually do quite well. Videos play fine as do the games /w smooth edges
View 9 Replies
View Related
Feb 12, 2009
Does any else have this feature working under Windows 7?
I have everything functioning (incl. FN brightness and volume controls) in my partitioned install except this.
I have the switch itself set to "Stamina" but neither mode even brings up the little green light beside it. It is completely unresponsive.
View 10 Replies
View Related
Aug 8, 2009
I have a VAIO VGN-SZ55GN but I found out that I can't switch between speed/stamina mode.
I had had the intel graphic driver installed automatically after I'd installed a new OS onto the laptop but I can't get the nVidia driver to work.
I tried shutting down the laptop, moved the switch to speed and turned on the laptop again but I still can't get the laptop started up w/ nVidia graphic card.
View 7 Replies
View Related
Feb 1, 2010
I have a sony vaio Z, its the vgn-z650n. I have it loaded with Windows 7 Ultimate.
I am having a strange issue with the wireless. I will have sudden speed decreases and/or the internet will stop all together.
The wireless connection is never actually dropped. When I have it hooked up with ethernet, it works perfectly fine with no issues
View 10 Replies
View Related
Mar 10, 2010
I have a Sony Vaio VGN-Z590 with windows 7 32 bit professional installed. When I switch to speed mode and hook up a monitor (24" dell LCD) via HDMI->DVI the graphics card temperature goes up to around 80-95C (measured with real temp 3.40) and the CPU temp also goes up into the 60-70s. No programs are using the CPU heavily. During this process the fans go up to max and the computer gets really loud. I have all the latest drivers installed and the latest BIOS.
I was wondering if anyone else has a problem like this? Would installing 64 bit windows 7 be better? It makes it really noisy when I hook up a monitor via HDMI. Any ideas?
Everything is perfect in stamina mode, low temps, low cpu usage.
View 3 Replies
View Related
Feb 17, 2010
Does anyone know what the speed is of the iLink port on the new Sony Vaio Z Series Core I7?
I'm trying to decide whether to get the Vaio Z with 3 usb ports or 2 usb ports and 1 iLink port. If the iLink port is a lot faster then the usb ports i'll probably get it with an ilink port. If it's a slow ilink port (400 mbps) then i'll probably get the laptop with 3 usb ports.
It would be nice if it comes with a fast ilink port (800mbps) so i can get a faster connection if i connect the laptop to an external hard drive.
View 8 Replies
View Related
Nov 9, 2009
just can't seem to get my Brightness controls to work in speed mode in windows 7.
I've tried 169.09, 180.70 and the most recent forceware drivers.
I've installed the registry file that was recommended in one thread.
I've tried all kinds of orders. Still, nothing.
I've currently installed (in this order)
SPEF
SonyPI
Shared Library
SonyUtils DLL
Event Service
The Registry Patch
NVIDIA Drivers
They work fine in STAMINA, but not in SPEED. I can't even access them through Windows Mobility Center or Power Options. I can change them a very small amount though the NVIDIA control panel through the "adjust color settings" tab. Otherwise, theres no mobility options in the NVIDIA panel.
View 5 Replies
View Related
Mar 12, 2010
I've just installed Windows 7 Ultimate 64bit on my Vaio Z11MNB. As Google told me there is a problem with the FN + F5/F6 brightness adjust in speed mode.
All Sony software ist installed correctly and in the newest version I found.
As in many threads mentioned I followed the right order. But I still cannot adjust the brightness in speed mode
This thread Problem with Vaio Z Windows 7 brightness lead me to the right graphic drivers I thougt... Okay these drivers[url] are for the ZD790 but this shouldn't matter it's the same 9300GS chipset...
The following sony software is installed:
SETTING_UTILITY_SERIES_5.1_5.1.0.11200
SFEP_DRIVER_SONY_8.0_10Q1_O_7_8.0.1.1
SPIC_DRIVER_8.0_09Q3_7_8.0.1.1
SONY_SHARED_LIBRARY_5.5_5.5.0.10160
VAIO_CONTROL_CENTER_4.1_4.1.0.10160
VAIO_EVENT_SERVICE_5.1FH_5.1.0.12010
VAIO_POWER_MANAGEMENT_5.0_5.0.0.11300
VAIO_SMART_NETWORK_3.1_3.1.0.11250
Another smaller problem: From time to time there is a yellow exclamation mark at the SD-Hostcontroller in the device manager. I've googled a lot but there seems to be no other driver than the windows included. VEN_1180&DEV_0822
View 4 Replies
View Related
Apr 24, 2009
I have a brand new xps16, running wonderfully.
I've modded the desktop Catalyst 9.4 drivers, games perform well, better than the provided Dell Catalyst.
What I would like to do however, is be able to alter the GPU clocks. Not by much, just a little.
I've tried AMD GPU clock tool; but this does not let me fix new clock values for the ATI 3670. I enter a new value, and they revert to the default right away
View 10 Replies
View Related
Feb 3, 2010
in the last few months my fps has dropped sharply from 500 frames in Gunz to 150 frames while in combat i have no idea what i couldve done i think i tried uc with my card once but it didnt work so i changed all settings back maybe i forgot to change some..? ibe checked and i cant find anything i also play WoW and my frames have also dropped here are my specs also i recently updated my video drivers that were two years old but they didnt help one bit
System Information
------------------
Time of this report: 2/3/2010, 21:06:55
Machine name: KOREYP
Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.090803-2339)
Language: English (Regional Setting: English)
System Manufacturer: Sony Corporation
System Model: VGN-FZ340E
BIOS: Ver 1.00PARTTBL
Processor: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz (2 CPUs), ~2.0GHz
Memory: 3070MB RAM
Page File: 2696MB used, 3645MB available
Windows Dir: C:Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
DxDiag Version: 7.00.6002.18107 32bit Unicode
------------
DxDiag Notes
------------
Display Tab 1: The file nvd3dum is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems found.
Input Tab: No problems found............
View 10 Replies
View Related
Feb 17, 2010
I accidentally dropped the Z series, well no functional damage luckily,
but my ring around the power button is broken- any kind soul would let me know where I can get the part and fix it myself?
View 7 Replies
View Related
Apr 15, 2010
I dropped my Sony Vaio VGN-AW125J laptop, my foot broke the fall, but a portion hit a table on the way down. My AC jack was banged up, so I ordered the part from Sony. My computer repair guy said that the new jack hasn't made a difference and still can't get power. He said it wasn't the operating system since he pulled out hard drive and it still doesn't power up. My original symptoms were when I powered it up, it would pretty much shut down after a few seconds.
Is there anything I can ask my computer guy to check before we trash it?
View 10 Replies
View Related
Mar 9, 2010
I was installing something and my laptop crashed. Now since I have the voltages set too low. I can't get myself back into windows. How can I reset the voltage during bootup?
View 3 Replies
View Related
Mar 22, 2009
it came with vista business installed, and replaced it with XP Professional.
so after that i realise that the clock changes automatically once i restart the computer.
the BIOS time is OK. and i have checked the clock config and all is OK.
can you tell me whats going wrong with it.
View 3 Replies
View Related
Jan 1, 2010
When I try to rip a CD, I'm getting some very slow rip speeds. Here's what I'm using:
Windows 7
Winamp Pro 5.571 & Windows Media Player 12
Sony Vaio Intel® Core™ 2 Duo P7450 (2.13GHz)with Intel® Centrino® processor with Blu-ray Disc(which seems to be a Pioneer BD?), 4GB RAM.
Lame version seems to be 3.98
View 10 Replies
View Related
Jul 26, 2009
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
View 5 Replies
View Related
Dec 18, 2009
On my brand new Sony SR590, I cannot get the ethernet connection to run at 10/100/1000, only at 10/100. I don't see any settings for this whatsoever and I think I've looked everywhere. I have the Yukon 88e8040 card. When I bought the computer, the site says it's a GbE card! But why isn't it running at such speed?
View 8 Replies
View Related
