Acer :: Aspire 5110 Post Error Prior To Booting
Mar 20, 2009
On Cold Boot I receive the following message and beep after Post prior to booting XP.
System BIOS Version V3.10A
Bus:06, Device:02, Function:00
ERROR
Resource Conflict - PCI in slot 03
Bus:06, Device:04, Function:00
Resource Conflict - PCI in slot 03
Bus:06, Device:04, Function 01
Resource ......
Bus....... ,Function 02
..........
....... , Function 03
Press F! to continue or F2 to enter BIOS
If I press F1 it boots up normal, if I reboot it it starts up fine.
View 7 Replies
ADVERTISEMENT
Sep 18, 2014
I have been working on computers for almost 20 years and this has me completely confused. My Aspire V3-571-6643 laptop was working fine until just recently. The system will power on and show the Acer screen and then immediately reboots. It will stay in this reboot loop until manually stopped.
I cleaned and reseated the RAM module and also tried it in both slots with no change. I was able to access BIOS and determined the drives and all settings are correct and even reset to factory defaults with no change. I then pulled the HDD to use in a docking station to determine if the drive was salvagable. Everything reads fine and passed both short and long tests via SeaTools. With the HDD installed the system won't try to boot to CD/USB but after removing it the system will boot to CD just fine. I then ran a full scan using Eurosoft Pc-Check and everything is fine. I reinstalled the HDD and immediately get the reboot loop again.
At this point the mainboard and HDD both test fine independently but will not work together. My only guess is that the mainboard is no longer supplying enough power for all of the components and crashing when the HDD tries to spin up on boot. That, or the SATA controller is malfunctioning and only working for the ODD.
View 4 Replies
View Related
Sep 19, 2014
I'm a PC repair technician and have been working on computers for almost 20 years and this has me completely confused. My Aspire V3-571-6643 laptop was working fine until just recently. The system will power on and show the Acer screen and then immediately reboots. It will stay in this reboot loop until manually stopped.
I cleaned and reseated the RAM module and also tried it in both slots with no change. I was able to access BIOS and determined the drives and all settings are correct and even reset to factory defaults with no change. I then pulled the HDD to use in a docking station to determine if the drive was salvagable. Everything reads fine and passed both short and long tests via SeaTools. With the HDD installed the system won't try to boot to CD/USB but after removing it the system will boot to CD just fine. I then ran a full scan using Eurosoft Pc-Check and everything is fine. I reinstalled the HDD and immediately get the reboot loop again.
At this point the mainboard and HDD both test fine independently but will not work together. My only guess is that the mainboard is no longer supplying enough power for all of the components and crashing when the HDD tries to spin up on boot. That, or the SATA controller is malfunctioning and only working for the ODD.
View 4 Replies
View Related
Oct 18, 2014
I purchased an Acer Aspire V3-772G-9822 laptop in August 2013.I had the original unit exchanged by the retailer due to a faulty screen (green line running down the display).
I also had the mainboard replaced near the end of the warranty period due to an internal fault with the power supply [case #3414447U].
I am now just outside the warranty period, with (ostensibly) a new mainboard, and the unit will not boot .
I have tried the remove-battery-and-power-supply-and-press-button exercise (resetting the power management IC, I presume) - no success. I have checked / re-seated / removed any / all / each internal SATA drives - no success. I have removed the memory (unit off) to see if I'd get a POST beep error message - no success ...
View 1 Replies
View Related
Oct 31, 2014
I have a two year old V5 571, a week ago it stopped booting up when I pressed the power button. There are no beeps and the laptop doesn't boot as far as the POST screen.
I've tried with battery and without and taken out the CMOS battery to reset it but still have the same problem.
As it's only two years old I would hope the motherboard hasn't gone.
View 9 Replies
View Related
Jan 1, 2015
My original hard drive of Acer aspire 5738G crashed and I bought a new 1 TB WD hard drive. I tried to reinstall Windows 7 from recovery disk. All data copy and system restoration (from 3 restoration disks) completed successfully. But after the auto reboot, during “Setup is applying system settings” stage I encountered error message “Windows Setup could not configure Windows to run this computer’s hardware”. I tried reinstalling the OS multiple times but every time I am getting the same error. Before replacing my hard drive, I was using Windows 7 Home Premium OEM version and now I was trying to restore the same in my system.
View 8 Replies
View Related
Mar 1, 2013
Inspiron 15 running Win7. After cleaning FBI virus, Windows 7 would start to boot then quickly go to BSOD 7b error. Tried Startup Repair many times. Toggled SATA Operation in BIOS to both ATA and AHCI. Imaged the disk, and did a Factory Restore via Startup Repair in AHCI mode then tried again in ATA.. I get the same exact error every time. I am pretty sure that the virus messed with one of the other partitions that is required to boot. I assume that I could order a CD and reinstall, but a way to repair this error.
View 3 Replies
View Related
Feb 19, 2015
My daughter's Acer is 2.5 years old and it's running Windows 7. She recently rebooted it last week for a Windows Update and since then it starts up but hangs, with the hard drive light blinking slowly. I ran it in Safe Mode and it gets through CLASSPNP.SYS then hangs. According to articles this is usually a hardware problem. The only option I have with this OS is to bring up the Command Prompt. I've tried System File Checker - no go. System Repair comes back with unknown error and what looks like a bad Driver.
I was able to build a new partition (100+GB) and do a clean install of Windows 7 x64 Ultimate w/ SP1. This went through fine, though I would have to load the Acer drivers for the network card, etc. to finalize it. The point here is that this shows that the hard drive isn't the issue.
My fear is that Windows installed either some sort of driver or other update that has now caused the current OS on her laptop to be unusable. I went to do a System Restore and the only restore point it had was the Critical Update that she rebooted to on 2/13. Trying to roll back to that Restore Point didn't work.
View 5 Replies
View Related
Mar 30, 2008
last year i formated my acer 9500 laptop and got a normal home win xp. A couple of days ago i got a hold of my original acer system cds and i decided to restore my system back.
Everything went well until the install finished; I was in windows and the first time i restarted the laptop it didnt boot back in win xp. When its about to start booting windows it stops and all i get is a black screen and a flickering white small line on the top line. I tried reinstalling the original system again and the same thing happends; after the first restart it doesnt want to boot xp.
I started reading forums and found out that if i press alt+f10 it might fix the problem.
It worked, if i press alt f10 before it reaches the black screen it loads into xp. This is the only way i can load it. As i read i got the feeling i might have messed up my MBR.
Im not sure how this all works but i have a hunch that my laptop doenst know where my xp is when its supposed to load it and by pressing alt f10 it somehow temporarly fixes that.
Is there any way to permanently fix this ? Some pple said that if i ran a normal non-acer win xp cd and ran some sort of MBR fix it might solve my problems. Im getting a cd from a friend in a couple of days . Is there any other way i can fix my notebook before then ?
Its not a big deal if i have to press alt f10 everytime i restart but its annoying and i have a hunch ill run into trouble later on.
View 5 Replies
View Related
Dec 13, 2009
I was installing Windows 7 on my Acer Aspire 6920.
It had Windows Vista installed. I deleted all the partitions including backup (Yes I found out that was stupid), and tried installing Windows 7.
It wouldn install Windows 7 so I went back to Windows Vista. I found my recovery disk and it sort of worked. There where no errors in the setup but when I start my computer it doesnt go to Windows.
It has a black screen with a white _ blinking.
View 4 Replies
View Related
Nov 16, 2009
I have a brand new Acer Aspire 5536 Notebook. It came pre-shipped with Vista which I did not want.
So I tried a fresh install of Win7 - formatted drive etc,. Machine takes 5+ mins to boot so I put this down to a compatibility issue and tried XP. However I have the same problem, fresh install with only updates installed and it takes forever to boot (even longer than Win7).
Once booted performance is ok (in Win7 it was near perfect). Any ideas, I am beginning to think it is defective.
View 14 Replies
View Related
May 13, 2010
Acer Aspire 7720 I've got. Basically it has both the common boot-up freeze and crackly/distorted sound problems that appear to be common. I understand that the best, albeit riskiest, way to solve these is to flash the bios to a more recent version, which I am prepared to do.
However - the bios upgrades are not available from Acer's own support site, and I don't know where else I can find them, and I have tried.... Is there anyone who can help me locate them? The problems with this laptop are driving me spare, and I really can't afford another, or even another motherboard, just yet.
View 4 Replies
View Related
Nov 4, 2014
I have had my acer aspire 6530 since August 2009 now. It never had any major problems. Sadly, after comming back from New Years Eve 2014, I wanted to turn it on, but it just started up for around 4 seconds and then started to reboot again and continued so, until power was plugged out or shut down. There was only a black screen, without BIOS etc.I've searched forums for a solution, all of whom resulted in failure.
View 2 Replies
View Related
Feb 19, 2015
I have a new Acer Aspire E1-572 and after setting it up, created a Windows 8.1 Recovery USB. When testing it, I find that when booting from the Recovery USB,
I'm prompted to select my keyboard and then to boot from the EFI USB. It then restarts and prompt me to select my keyboard etc.
View 3 Replies
View Related
Dec 15, 2008
A work mate of mine wants me to add XP to his Aspire before he goes overseas for work purposes.
Will i need to slipstream SATA drivers for this model? I have an XP sp3 disc.
View 4 Replies
View Related
Oct 21, 2008
I bought an ACER Aspire 7720G Intel Core 2 Duo with Vista SP1 3 weeks ago and have now some problems with my WLan and with booting after sleep. WLan only works when I restart the computer after swiching on the WLan connection either by pressing the WLan button or by activating the connection in "networks and sharing center" (at least it works then, but it's annoying to restart the computer all the time). Since I use WLan at home I get a message while booting the system (Broadcom UNDI PXE.... Client... MAC ADDR:... GUID... DHCP ...not found..blabla). I use a Lan connection at work and here I have no problems yet. My second problem is that my computer really stays asleep after I woke it up from sleep or just if I would not use it some minutes. It does not show any system related information anymore and I can only restart it again. I have looked up my BIOS and it is Version 1.44 (read the thread about the BIOS problems),
View 4 Replies
View Related
Oct 8, 2014
I have cleaned my Aspire 5750 as it had accumulated dust over last 3years, I stripped down, clean the fan, re-pasted the CPU and put everything back carefully, when I switched it on, the fan spins for a while and turns off, battery gets charged( changing from orange to blue) but only black screen.
I have checked the connections, changed CMOS battery, tried pressing Power button without battery and mains for 20 secs.
View 3 Replies
View Related
Dec 25, 2014
I normally powered off my laptop , and then when i try power on again , just a blank screen.Power light is on , no wireless light nor hdd light.I seperated all parts and renewed thermal pastes, tried to short cmos battery , tried without hdd , rams nothing on site worked..At first i wasnt able to flash bios from usb but when i tried flashing it while hdmi cable is in it worked , usb shown activity for 2minThen it powered off and on itself , but still no screen.What would i try else , cmos battery is not replaceable on this model , should i go see repairer to replace this battery?
View 8 Replies
View Related
Nov 4, 2014
Just bought an Aspire ES1-511. Not my first Windows 8.1 laptop, but my first with UEIF firmware.
I've been trying to boot Driveimage from CD to do an offline backup, and guess what, it wouldnt recognise the CD as bootable. Fixed that by setting the boot type to "Legacy" in the BIOS and it boots fine.
My problem is that the mouse doesnt work after booting from the CD. Watching the behaviour of the mouse, it powers up when I press the power button, but powers off immediately the POST completes.
If booting Windows from the HD, power to USB is restored as soon as windows loads to the lock screen.
View 2 Replies
View Related
Nov 12, 2014
where I can get 32 bit Windows Vista drivers for WLAN on the Acer Aspire V 11 Touch? Can dual boot the software but cannot connect to the internet on Vista.
View 8 Replies
View Related
Jan 14, 2015
I have an Aspire V5 -473P-5602. This is my 2nd unit as the first had issues that couldn't be fixed. Had this replacement for 2 months now and has been working great until recently. I'm hoping this is a minor thing, but I can't seem to find anything online about it.
Basically, sometimes when I turn on the computer it boots into the "insydeh20" screen. Not every time but enough to be annoying to me. The computer is pretty much as is when I got it new. No 3rd party apps, nothing modified etc etc.
Again, except for installing Windows updates nothing on the computer has been changed. Sometimes when I start the computer I hear a clicking sound ( one click) Seems it makes the noise when there is a Microsft update available. Normal?? Never did it before...
View 7 Replies
View Related
Mar 4, 2015
when my computer boots up it says "automatic repair" then it says "diagnosing your pc" then it goes from the logo screen to a blue screen that says "automatic repair" it gives you options and plenty of them but none of them work for my notebook computer. im starting to think of just throwing it away because it cannot be repaired and i dont have a warranty on it anymore in order to send it in. even if i did have the warranty it would take months to get back to me. so.....anyways ive tried command prompt to somehow reset it to factory defaults but i do not know how to do that. when i click on refresh your pc it says "there was a problem with refreshing your pc." and then when i click on "reset your pc" says "there was a problem resetting your pc" ....
View 1 Replies
View Related
Aug 15, 2013
Just 2 days ago I started recieving the error message 'Fan Error' after booting up my computer (T530). Before it gives me the message there is a loud beep noise. I'm going back to school soon and I'm hoping there is a way to repair this myself without buying a new fan. I'm really bad with operating on computers. I'm wondering if I just have to clean dust out of it or nudge the fan or something like that.
View 2 Replies
View Related
Nov 10, 2014
I have a Acer Aspire E5-511P with bios Insydeh20. On UEFI it does boot USB-drive, even with passwords set. It boots on USB-drive with legacy set, but now my Wifi doesn't work. On older laptops no issues with UEFI, I just had to set boot order. And Wifi works just fine.
View 3 Replies
View Related
Nov 30, 2014
I have a 4 year old Aspire 5552-5898 which is having issues ....
First issue is that the Laptop doesn't always boot. When this happens, the power button will light, the fan will spin, the HDD will start, but the screen stays black. Sometimes the PC will restart but the same thing will happen. Usually when this happens, if you hold down the power button, the laptop will power down, only to start up again. The only way to end this cycle is to unplug the machine and pull out the battery. Also of note this seems to happen 100% of the time if the machine is not plugged in, and about 50% of the time when it is.
The next issue occurs when the machine does actually boot. I HAVE to enter the bios because it never holds the date. I thought this could be a CMOS battery issue, but even after replacing that, the problem persists. After entering the date, and saving and exiting, the machine will boot into windows just fine.
View 3 Replies
View Related
Nov 6, 2014
I have Dell Studio 1558 laptop, when i switch ON it is not booting.. i can hear the sound of fan & the Drive but i cant see anything on the screen, sometimes it will boot up but it will work for only 10 mins then the screen will go off & will never come ON again.
When i ran the Diagnostics by pressing F12 during startup i got an error message
**LDC -LCD connection Test**
----
Error Code 0321
Msg: Error Code 2000-0321
Msg:LCD EDID - unable to access EDID EEPROM
View 1 Replies
View Related
May 30, 2013
This is Dell Inspiron N4010, just replace a new HD and when booting got error message
"Check cable connection!" PXE-MOF: Exiting Intel PXE ROM.
BIOS is recognizing the HD, What seems to be the problem....
View 7 Replies
View Related
Nov 27, 2008
I used 2 X 2GB memory but on my BIOS it recon only 3.3 GB, but few days ago my laptop going nuts, my geforce 7300 go is falling.
after contacted my local acer service, and they examine my laptop, they found my mem card had no problem on it, and the upgrade my BIOS to clean up the mess but, my mem reduce from 3.3 to only 3 gb. it all at the bios mem check, not on OS. they said this laptop didn't support 4 GB memory, that's wierd, on this notebook spec it said up to 4 GB. not 3 GB.
so where the going wrong? since I already run this laptop with 4 GB ram and recon it as 3.3 gb and had no problem with it, for a long times, but after had problem with the geforce faling down it can't recon 3.3 gb after they fix it with upgrade the bios. I think the problem goes to the motherboard, if I goes to old bios the geforce is falling down, if I stay on this bios it's only recon 3 gb ram mem. they can't explain why this happen.
and the bottom line, you guys with acer laptop and using 4 GB ram memory should check at the bios, how much it recon, it as 4 GB or 3.3 GB.
since IMHO the OS never will be using 4 GB if the bios didn't recon it.
but there is some glicth if you look at the system information it recon 4 GB but, on bios it recon as 3 GB and the task manager recon it as 3 GB
View 5 Replies
View Related
Sep 5, 2014
During restore using Acer recovery disks for this Acer aspire 551, the recovery stalls at the final step where the wim file is written to the c: drive. It gives me an i/o error.
I suspect that the disk is functional because I have run the cmd.exe program from the x:drive and then run both scndsk.exe and scndsk.exe /F to fix any errors. No errors were detected.
However, any fix for this error that I have encountered suggests replacing the hardrive. This seems to be inappropriate, in this case.
I should also say that I have used dos commands to copy a file from the system32 directory to the c: drive successfully suggesting that there is no problem with writing to the disk.
Lastly, the cd rom hardware must be working or the disks would not be successfully read to the final stage. How this can be an i/o error eludes me.
View 2 Replies
View Related
Nov 15, 2007
I've been getting the BSOD error on my PC. The main ewrror is 0x000000f4 but I sometimes get the 77 error as well. Most times i need to reboot and then I get the 200 fixed hard disk 0 failed error . If I click F! i get yet another error, PXE.61 error and this takes my rebooting quite a few times in order to get windows xp (media center edition) to come uo it stays on for a while (the length of time is getting shorter and shoryer these days) and then I have to go through the entire scenario over again. I'm trying to remove the files and programs that I actually care about off this comp. I contacted Acer tech support and was told that it most likely a HArd drive problem and that it would need to be replaced They had the wrong warranty ending date for me and after providing proof of purchase, they changed it to 11/23/07. Now that I have about 8 days left on my warranty. the tech support person told me to purchase the extended warranty because if I ship it to them and the warranty expires, I will have to pay for the service. Now my question is this. I'm not too sure that it would be worth shipping it to them for repairs I will have to pay $99 for the warranty plus tax and At least $100 to ship it back to them. On top of that I have read horror stories about people who sent their comps in to be repaired and it being returned to them with scratches on the LCD, initial problems not repaird or additional problems after the comp was returned to them. I'd much rather carry it in to a shop but was told their are no local repair shops in my city except for geek squad and they will charge me since I didn't purchase my comp from them. WHat would you do take it to a local repair shop or pay the bugcks to extend the warranty and then pay to have it shipped to be repaired? Another reason why I am leery is because I bought a HP laptop last year. the Ac adapter jack ont he comp was loose so I shipped it to HP to have it repaired. they had my comp for almost a month and then told me the motherboard, keyboard, speakers, and LCD display was unsalvageable and that it would cost me over $1000 to have it replaced(i only paid $369 for it on black Friday). They also told me that I had a liquid spill which was a total lie as I keep my laptop in my bedroom and I never eat or drink in my bedroom.( come to find out that loose jacks are a known problem with some Hp laptops I have read horror storeies about Acer using the dreaded liquid spill excuse too and I don't want to go through the drama again. Are the BSOD errors definitely the fault of a faulty hard drive?
View 7 Replies
View Related
