Startup seems to be going as spec., Acer logo appears, circular arrow goes round then screen goes opaque but obviously still lit. Curser still responds but that's the end of the action.
View 5 RepliesWhen i boot my laptop everything seems to start but the screen remains blank. Nothing will come up. I have taken it apart several times to make sure everything was connected and reaplied arctic silver to the cpu and vga.
View 9 Replies View RelatedGot an acer 5742 running windows 7. All of a sudden the display has stopped working.
It boots fine and the display works up to the point of "starting windows". I see the windows logo for a bit then it goes off.
If I plug into an external display it works fine. In graphics properties, the display isnt even listed (only the external display shows up).
I have an Inspiron 15R Windows 7. Set default power setting "Ballanced" but screen goes blank after 1 minute and 5 seconds not moving my mouse or depressing keyboard key on both battery power and plugged in. Screen should remain on 5 minutes on battery and 10 minutes plugged in. Tried resetting default power settings without success. Very distracting when trying to read anything that takes longer than 65 seconds.
View 1 Replies View RelatedI have a Dell Inspiron 9400, I think thats the same as an Inspiron E17-- in america (for some reason dell likes to confuse its customers).
My screen goes competely blank after the dell logo and windows logo show up on startup.
Everything works because I can still log into windows and shut it down using shortcuts and all the normal sounds are played, there is just nothing on the screen
I've got a late 07 macbook pro with those faulty 8600 nvidia gpus. My macbook pro was working fine last night and now this afternoon its got a blank screen upon startup. I can still hear the chime and it still boots into the OS as i can still change the volume and backlit brightness etc.... Is it confirmed to say that my luck has ran out and the GPU is dead?
My warranty has expired and have no extended applecare + I bought the macbook in one of those education apple store. Will I still be able to get the free repairs as stated by apple and even if I do, won't they still replace the logic board with another unused faulty one and down the track my macbook pro will still be prone to that same failure?
I just bought a Lenovo Y50-70, with no operating system. Problem is, I'm not able to enter the UEFI or start the installation media in any way. I'm just presented with a black screen, whatever I do (tried every key while powering on: novo button, F2, DEL, F12, ecc...). A
View 3 Replies View RelatedBasically, turned off my computer yesterday, and I turned it back on today, and it opens the dell loading screen, then the vista loading screen, then the screen goes blank, but the light is on but nothing appears on screen,
I also can hear the vista opening music from when the sign in page opens........
also when I boot in safe mode it works perfectly with no problems ??
I've been having problems with my Aspire 5336 laptop. The screen comes on for a few seconds then goes so dark can hardly see it. When its plugged into an external monitor it is ok but as soon as you unplugged it the laptop screen comes on for a few seconds then goes dark. Do you think it is a back light problem.
View 1 Replies View RelatedMy Inspiron N7010 was working fine until 2 days ago. I had it playing a movie through the HDMI port to my TV & then the video started to freeze up. Starting the next day, when I tried to start it up, it beeps 8 times & goes to a black screen, then eventually it turns off. I opened it up & re-seated the CMOS battery & checked all the ribbons. Tried holding the "d" key while powering on, the screen cycles through the colors & then goes black & powers off. Tried connecting to 2 different external monitors, could not get a picture on either.
View 1 Replies View RelatedI have an HP Pavilion g4-2149se Notebook running Windows 7.For the past 2 weeks almost, whenever I start my computer, before getting the Windows welcome screen, I get a lingering blank screen with a cursor. Then, it'll finally get to the welcome screen, but before it loads my desktop, I'll get another lingering blank screen with a cursor. Honestly, I'm grateful that my computer is still starting up at all... But is there any way to fix the lingering blank screens? It's making me nervous.I've looked around the web for a solution for days, and anything I could find I've tried, but nothing has worked. I uninstalled all recent Windows updates, hoping one of them had went wrong, but no luck I scanned for virus' and malware and found nothing. I've only downloaded one program since I noticed the problem began (4K Video Downloader), though the program doesn't seem to be a problem.
View 2 Replies View RelatedI just bought an Acer Aspire D255E with a cracked display. I tested it and it worked fine. Replaced the display with a brand new one, and the result is that it comes on, displays the opening screen, briefly flashes what looks like the screen you get when you shut down abnormally,then powers down. It will also power down in about the same time if I F2 into the BIOS.
View 8 Replies View RelatedI have an issue with my Inspiron N5010 screen, it doesn't work when switching on my laptop on Battery or AC mode. It happens a lot of times when I turn on the laptop the power button, the power indicators at the bottom turns on normally and the laptop is running without any weird sounds. But the screen is pitch black even doesn't show up anything when I concentrate on it in with a lamp or any light.
When I press the power button again even after 5 mins from the start time of being running the laptop just turn off immediately and doesn't take time to switch off as If the windows wasn't loaded!
I was resolving this problem by disconnecting the AC adapter > removing the battery > Pressing and hold the power button for 20 seconds technique.but today it doesn't work anymore, If there's anything I can do to get the screen backlight to work normally ....
I have an Acer Aspire 1362i. Lately when I am working on the laptop, the screen has been going blank for no apparant reason. This can happen on startup, after 1, 5 or 10 minutes. where to start Troubleshooting this problem?
View 12 Replies View RelatedI have an Aspire 5610 with 2G ram running vista home premium. I had a few explorer windows open, and was getting memory warnings. I shut a few windows down, and a few hours later, the screen turned blank. I reboot the computer, but the problem persists. Now it turns out if I remove the power supply, and run it on battery, everything is fine. As soon as I instert the power supply chord, screen goes blank (black). Upon removing the power supply, if I shut and open the screen, it works again (and it also shows me a warning message that the wireless is in use, and if I really want to turn the antenna off).
The screen obviously is fine, as it runs fine on battery. I don't understand what is happening as soon as I insert the power supply, and why upon removing the power supply, I get a warning on turning off the antenna.
2 days ago I had trouble accessing the internet on my E1-570. Windows Explorer kept throwing up a fault and restoring the page. Eventually I loaded Safari and then Firefox and resolved to sort the problem with Windows Explorer some time in the future. This may be unrelated to what happened the next night. Started the E1 and got the usual "Acer, Explore beyond limits" screen and spinning dots, then got the login screen - input password then return. Spinning dots for much longer than usual then blank screen. I can see the cursor arrow so the screen itself must be functioning. Lights on the front are working - AC, battery and HDD. I have had the machine 14 months and it is used exclusively at home so has not been roughly treated.
View 4 Replies View RelatedI have a X1 Carbon 3443CTO and it's running fine.Last night everything was ok and I went into the BIOS and changed AHCI to compatibility (don't ask me why, I was doing some testing), then I went "Exit and Save Changes" (at the last page of BIOS). As soon as I press Enter the screen freezed there (as opposed to reboot)Since it hangs there I hold the power button and it shutdown.Then I power it up again, but now, here is the problem:
1) The computer turns ON, keyboard backlight flash on for a second (normal)
2) Screen stays blank (no, it's not the backlight faulty)
3) power light turns ON (normal)
4) no sign of activities pressing any buttons, no beep sound
i have a acer aspire one notebook and my internet browerser is not working all i get is a blank screen when i use the internet...
View 15 Replies View RelatedI normally powered off my laptop , and then when i try power on again , just a blank screen.Power light is on , no wireless light nor hdd light.I seperated all parts and renewed thermal pastes, tried to short cmos battery , tried without hdd , rams nothing on site worked..At first i wasnt able to flash bios from usb but when i tried flashing it while hdmi cable is in it worked , usb shown activity for 2minThen it powered off and on itself , but still no screen.What would i try else , cmos battery is not replaceable on this model , should i go see repairer to replace this battery?
View 8 Replies View RelatedI watched a movie on Thursday evening and closed the lid of my acer aspire E531 laptop. (Chosen shut down method) I wanted to resume working about 2 hours later and was greeted by only a grey screen. Machine powers up but then just the blank screen. After switching on, the fan starts for about 30 seconds and then stops and then the blank (grey like screen)
I've tried some solutions posted on internet ( remove battery and hold power button; press ctr alt del twice; press F8 on start up) Nothing worked. The remove battery solution ignited some response from the machine, i.e. grey screen seemed to turn white with feint blocks in background almost checkered blocks, but very very feint.
Got an acer 5742 running windows 7. All of a sudden the display has stopped working.
It boots fine and the display works up to the point of "starting windows". I see the windows logo for a bit then it goes off.
If I plug into an external display it works fine. In graphics properties, the display isnt even listed (only the external display shows up).
I'm having major problems with connecting to the wireless network in the office. It sees the network, allows me to enter the security credentials, then connects (with confimed internet connectivity) but drops out after 10-20 seconds. I have tried the wireless network at a friend's house which worked ok without any interruptions, so it is definitely nothing wrong with the hardware. I'm using a brand new Acer Aspire V3-572-56T3 on Windows 8.1, with all the latest drivers/patches loaded and have tried fiddling with many of the advanced settings for the network adapter to no avail. I logged on to the router to ensure all settings, encryption standards, channels etc. were matching but the problem keeps persisting. This has been ongoing for two days now and is driving me insane as I really need to have wi-fi working in the office. Plugging an ethernet cable straight into the router works fine but it's not the ideal solution (and is posing an OH&S hazard as it is laying on the floor).
FYI I have run diagnostics several times & the one thing that stood out was this:
Diagnostics Information (Wireless Connectivity)Association status: Fail 0x00038002Association reason code: 0x00000002
Result of diagnosis: Problem foundIssue referred to: RNWF MSM Helper ClassRoot cause: Windows could not connect to "ERICSSON"You can try to connect again.
Result of diagnosis: Problem found
[Code] ....
After change BIOS set up, the Acer 6920 cannot boot.
After turn on the ACER screen apperar with F2 (Bios) and F12 (multiboot) appear. If you dont press anything a black screen appear and stay there. If you press F2 or F12 the acer screeen stay with the "Please wait" message on it and stay forever. If dont press anything the black screen appear and stay there. Never got the RAM counting screen.
Looks like a BIOS problems so got the last version, put alone in a USB , put on the note and reboot with try every F key and every Fn+F key but never got a result.
Recently my Aspire 9113 started producing screen corruption during the boot process, looking something like an old version of space invaders, (text mode blocks) and then a hatched pattern in XP. It also would crash with a BSOD driver error related to the video driver. I removed the driver (FX Go7600 card) and at least the computer worked with the exception of the screen being slow to render.
I subsequently decided to investigate the BIOS and as a random act of faith decided to reset the BIOS to default settings. Since this, when the machine boots the screen is blank(black) during POST and XP boot up. I can still login to XP so I assume that everything else is OK.
As I removed the driver I don't think I can switch the display to an external LCD although if the card really is gone then I guess this wouldn't work.
I know I have read several posts about this issue but Cntl+shift+Esc not solving issue. Notebook with black screen upon startup. I hear Windows 7 booting up but have a black screen. Was troubleshooting a monitor issue again when black screen happened.
Aspire 5552,Windows7 home premium..
I have an acer aspire 7560 that shows a white screen when i try to boot up.
View 4 Replies View RelatedI have an acer aspire 5536 it cam with vista everything ran fine with vista.When I installed windows 7 everything ran fine as well a week ago I started having startup problems,at first it only would take like 5 minutes to start up every few startups no big now it goes to the windows loading screen then goes black requiring me to restart it and run startup repair every time to get it to turn on. Other than that it works perfectly how do I fix it?
View 8 Replies View RelatedJust had my Aspire E15 for a month and even though the power supply lights are on it fails to start up and just have a blank screen with the pointer mouse on.
View 4 Replies View RelatedI just bought an aspire switch 10 last week, but I already got into problems with it.You see, when I turn it on, the acer logo appears, but then the screen goes blank and black.When I tried pressing some buttons, there is a mans voice and tells what the button I pressed is. Then nothing happens. It's just like that to every button. I tried to turn it of by just having the battery empty. Cause the screens still blank.What do I do about it?
View 1 Replies View RelatedRecently, the screen on my laptop goes blank, then after a few seconds returns to normal with a message that the display driver stopped working but has recovered.
Is there a possible solution to stop this happening?