I have a 6920G, and I was just watching a simple Youtube movie when suddenly I noticed a dramatic loss in bass from the sound. I went into the settings and played around with the "Internal Subwoofer" volume setting since that's the one many of you guys on here say control the Tuba. I played a song and played around with the volume setting just to confirm if it was working or not, normally you can tell if you slide the volume back and forth if the Tuba is working but this time the bass didn't change regardless of which position the slider is in. On top of that, it's obvious the Tuba isn't working because the sound quality is horrible now without the Tuba, the standard speakers don't do a really good job producing bass and normal bass notes in music are almost silent now - basically, everything has a "treble-ly" feel to it now.
I have installed a clean version of Windows 7 on my Acer 6530G and installed the drivers provided on the Acer site, but after setting 5.1 audio in the settings and ran the test, there is no sound coming out of the Subwoofer.
I don't have any Acer software anymore, only because there are none to download on the Acer site apart from the launch manager.
Does anyone know what I need to do in order to get the subwoofer to work?
Tried getting the empower framework to install in order to use the launch button for it, but keep getting an error message about 'no supported operating system'!
Up until now, the speakers have been working fine, especially the 5.1 surround sound.
Though, after reinstalling the Realtek HD Audio driver for my 6930, the 5.1 surround sound doesn't seem to be working as well as before. Although I can still select 5.1 sound, there appears to be little difference in the audio, as now it sounds quite treble-like (no bass at all). I've reinstalled the audio driver several times, with the same result every time.
i had installed windows7 on my acer 6920g. Everything works fine except for the audio. I tried the default windows update drivers, vista drivers that came with my laptop and also windows7 drivers of 6930g. Tuba doesn't work at all and the sound is like a tin can. And for some drivers the microphone doesn't work. (Currently im using 6930g windows 7 drivers and the microphone works. Tuba is still not working.)
On top of that the sound becomes distorted every few minutes and i have to restart media player or any audio playing application to make it normal. After few minutes of playing any audio it happens again. Sometimes when playing game the sound will become distorted and the only way to make it normal is to restart the game.
I've had this laptop since November as a replacement for my old 6920G which unfortunately got stolen, and the subwoofer/booster has been working fine with the latest Realtek driver on Windows 7.
However today I noticed that my music sounded a bit 'tinny', then discovered that the tuba booster thing wasn't working at all. I have no idea when it stopped working, although I suspect it my have physically broken in some way as I've done quite a bit of trvelling with my laptop over Christmas.
Is there any way I can properly identify the cause of the problem, and how would I go about getting it fixed? I'm not sure if I even have a warranty as I bought it second hand off ebay!
So after the last couple years in school, my speakers are shot. I have an inspiron 1720 and was wondering how hard it is to change out the speakers.
I was looking around and found these: http://www.parts-people.com/index.ph...n=item&id=4807. I looked through the manual and couldnt find a tutorial on how to change the speakers or get to them or anything.
I have an Acer 5610-4610 system. It was repartitioned to one XP drive for several years. I am finally wanting to put the PQ service partition back on it but none of the folders of the restore CD's have any of the files needed to recreate this partition. I am wanting to put the factory (VISTA Home Premium) system on C. With all the system files and folders from the 3 restore CD's into the PQSERVICE partition. I have no clue how to proceed.
I do remember there was an acer(C) partition and a data (D) partition when I got it. The PQSERVICE partition was there back then.
The first (System) CD has none of the files mbrwrdos.exe or rtmbr.bin used to create the PQSERVICE system.
I run the ACER Disk Formatter and it cannot find any drives on the laptop.
Weird! From what I've been able to glean my thought was that that the Formatter disk would facilitate creating the correct partitions?
Recently I developed this simple application that lets you easily configure CineDash and other buttons functions on Acer laptops. This application, “Acer CineDash Config”, is mainly for mine purposes.
I tested it on my Acer 6935G and Windows 7 64bit version. It probably should work on other models and systems to.
Some of the features that Acer CineDash Config supports are: •32bit and 64bit systems •Configuring applications to run and captions for buttons:oArcade DeluxeoEmpowering tech.oInternetoE-Mail•Making and restoring registry backup •Enabling media keys to work with other programs, like winamp, and restoring original key mapping file
I have an Acer 6930ZG with a fresh install of windows 7 RC 32bit. I can play Call Of Duty 4, Counter Strike, Flatout 2 etc. with no problems! But when I try to open MapleStory a blue screen appears, and begin to make a physcial memory dump? . MapleStory is a 2D-game, and Call Of Duty requires much more.
I made a little research, and I found out that alot of people have the same problem, and they said it was caused by a conflict with a program or hardware drivers. I have tried to delete my NVIDIA driver, and install it again. No luck.
And yes, I have also tried to run MapleStory in compatibily mode
As I said: It's only in MapleStory I experience the problem, and I don't think it's ram-failure, since I have seen the same problem on a different computer, and I can play Call of Duty 4.
Here is the system log: Problemsignatur: Navn på problemhændelse:BlueScreen OS-version:6.1.7184.108.40.206.256.1 Landestandard-id:1030.....................
I had vista installed on my laptop, Acer 6920, (first OS) and it was direct from factory so everything worked fine. I then installed ubuntu and everything still worked fine. I then deinstalled both of those to put on windows 7 RC where all my hardware was working perfectly (minus the fingerprint reader but i honestly couldnt care about that thing) so my computer eventually got pretty bogged down with crap to the point where boot was about 30 minutes. during this whole time my sound seemed to work, but near the end windows stopped finding any internal sound related hardware (the speakers and the mic). For other reasons i did a clean reformat (3 times) and reinstalled 7 Professional 32 bit and when i booted i downloaded all the drivers and everything seemed to install correctly, but when i rebooted the sound still didnt work nor did the mic. the exact error message windows is giving me is "No Audio Output Device found" however when i plug in a headset or a bluetooth adapter + headphones there is audio and it works perfectly. I really need sound to work as some programs crash if they dont detect a sound output and also for monitoring audio recordings.
I have tried installing all of Realtek's drivers. Literally all of them. None of them worked what so ever despite clean installs and deinstalls.
I now am running 64bit and ive almost given up on this problem. I bearly saved this computer and i dont wanna have to buy a new because of sucha stupid issue like this. More info:
Under the hardware manager in windows there is no tree for sound devices. there was an unknown component which i put forceware on as i thought it was the sound device but no go.
DXDIAG: Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255) Language: English (Regional Setting: English) System Manufacturer: Acer System Model: Aspire 6920 BIOS: Ver 1.00PARTTBL6 Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (2 CPUs), ~2.2GHz Memory: 3072MB RAM Available OS Memory: 3070MB RAM Page File: 1303MB used, 4835MB available Windows Dir: C:Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 64bit Unicode
I just installed XP Pro on my Acer Extensa 4630Z and I installed all the drivers successfully but the wireless driver. I tried all the drivers from acer's support site [url] none of them work. I also tried what worked for Davoucci with same laptop but this driver also doesn't work for me
ive just re-installed vista home premium on my acer travelmate 5320 but now the led for the wireless is reversed, so when the wifi is on the led is off and vice versa does anyone have any ideas whatsoever as i am at a loss with this one.
I have an Acer 5672. It has the media keys on the left side of the keyboard where i can control the volume, stop, pause etc. I reformatted my machine and reinstalled XP Pro. When i use the media keys there is no display on the screen of what i am doing. What i mean is before if i turned the volume up or down it would display on the screen and you would see like a volume bar moving up or down. How do i get that back?
i bought a ACER AS6530G-804G64MN and it supports 1080p (full hd 1080p playback) but my desktop resolution can be maximum at 1366x768.. is it ok or is it a driver problem should i force it to 1920*1080 ?