Bought mine AOA150-1049 from newegg, it did not come with a soft sleeve case. When i have to RMA it, they want me to return the case which i never received. Their inspection department claimed there is one included which is not true in the box i received from them.
View 10 RepliesAfter changing from XP to Ubuntu 14.04 LTS I found the netbook a tad slow. It has the original configuration with ½ GB fixed ram plus ½ GB removeable. I tried to insert a 2 GB DDR2 1.8V but the machine would not boot. What is the max GB I can use?
View 8 Replies View RelatedI've been battling with this for months. Aspire one connects to router but not internet.
View 6 Replies View RelatedHave an Aspire One model ZG5 AOA150-1570 running winXP.
The hard drive has had a failure and after running disk checks (dskchk) using a special mini XP boot CD, I was able to view and copy my important files, pictures and videos to a thumb drive. Now I need to replace the drive but can I somehow use the directory and files of the protected area/hidden partition on the bad drive and copy that to a new drive and use those files to restore to initial specs on the new drive using e-recovery. I can use the alt-f10 to boot to the e-recovery on the bad drive but since the drive is bad I don't want to revert to factory specs.
Again can I install a new hard drive and somehow copy all the files needed (what files would they be?) from the old drive to the new drive and then run the e-recovery restoring the computer to factory specs with this new drive installed??
If for some reason I can't do that or if it fails while trying I can always reinstall with a new installation of XP.
I recently bought a nice Targus back pack for my new laptop, but I noticed that it will not fit due to the battery sticking out the rear about an inch...does anybody know of any aluminum cases (preferred) or nice back packs that will fit this inside it?
View 12 Replies View RelatedThe DC inlet socket is bad and I would like to see if it it needs soldering. I took away 18 screws but I am not able to open the case.
View 5 Replies View RelatedI'm referring to this battery.
My 6-cell is starting to barely give me 4 hours after I accidentally pushed it too far a couple times, and I was searching for a replacement and found these new "9-cell" batteries. Do they really provide the jump in battery life that 6-cells provides over 3-cells?
I can never find any in Ireland/UK/Europe. Which models in specific carry the 6 cell battery.
Would it be at all cost effective to get a cheap Aspire One and a seperate battery?
I'm a proud new owner of a MBP 13-inch. couple of matters.
(1) A good skin/sleeve/cover/case to protect it on the go. Ideally I'd like a very lightweight and elegant skin or shell that's on all the time to protect the exterior from wear and tear, without trapping too much heat.
(2) I need a sleek padded case to carry the unit and typical accessories (charger, adapters, mouse) and other small items.
(3) I'm looking for a convenient laptop stand for my desk to set the MBP alongside an external monitor.
I have an XPS m1330 (T7500, 3 GB RAM, 8400M GS GPU) and had a bad 6-cell battery that wasn't holding charge.
Dell sent me a replacement, but they've sent me a 9-cell which I don't want b/c it's heavy, adds bulk and most importantly, the angle on the laptop REALLY hurts my wrists... but apparently they won't send out 6-cells as replacements anymore, just 9-cells.
I'm wondering if there's anything I can tell them to get them to send me a 6-cell without having to put my 9-cell on ebay or something .....
I'm looking to get the Studio 1555 and the only thing I'm not sure on right now is which battery to get.
Is it true that the 9 cell sticks out the bottom a little bit? I would just go for the 9 cell, but I use my current laptop on my lap a lot and I'm worried that if the battery sticks out the bottom it would be uncomfortable since the laptop would be resting on two points rather than the entire bottom
how do I check how many cells my battery has? Its either 4 or 6, since it doesn't have the external prop behind it.
View 9 Replies View RelatedI have a Dell Inspiron 6000 for about 4 years almost. I have 512MB but am going to buy the 2GB ram from newegg because it is very slow.
I am also formating my laptop as well as my desktop. Most of the time i use my desktop but for my laptop i bought a charger that was CHEAP and i think it messed up my battery life a bit.
I just purchased a new charger from Dell and will throw away the bad charger i have.
My battery life in my 6000 is about 40 minutes. It used to be 2 hours and 30 minutes when i first got it. A few months ago it was actually 1 hour and 20 minutes. My neighbor has a e1505 and his battery lasts like 5 minutes now so all he does is use his charger.
I see on Ebay from reputable sellers that the 6 and 9 cell battery price is pretty close. 6 Cell is about 44 dollars and 9 Cell is about 48 dollars.
6 Cell one
http://cgi.ebay.com/New-Dell-Inspiro...#ht_2614wt_987
i am having a hard time deciding my configuration for a inspiron 13"
i noticed that the Refurbished laptop have a Great price $609, 2.0 intel core 2 duo,4gb,320gb,6cell,Dell 1395 802.11G Wireless Mini Card.
For that price it seems to good to be truth, but i have no experience with refurbished laptop.
What is causing me confusion is, if i should go for a new laptop that has ,2.0ghz(same cpu), 3gb,250gb,intel next gen wireless N, 9 cell battery
for $779, all because the $10 for the wireless and 70$ for the battery
and it has a 195$ discount already of the original price.
so i know that the 6-cell battery lasts about 1h:50mins just doing light stuff such as web-browsing and word processing(maximum brightness, power saving mode). Anyone have any ideas how long the 9-cell can last while just watching movies??
View 5 Replies View RelatedI have an HP Pavilion dv6000. When I purchased the laptop, I chose a 12 cell battery, and it has a sticker on it that states: Replace with 451864-001. My battery went bad, and I purchased a replacement at the HP Parts Store online. I specifically chose a 12 cell replacement, which brought up the same part number, i.e., 451864-001. However, when it came in the mail today, the battery looks like a 6 cell, as it's about 1/3 the size of the old 12 cell, despite my purchase receipt which states that I ordered a 12 cell and the packing slip which also states that HP shipped a 12 cell. The model number of the old battery is HSTNN-DB32, and the model number of the new battery is HSTNN-DB46. Unless they were able to shrink the 12 cell to make it resemble a 6 cell, I'm pretty sure I received a 6 cell, despite the notations in the purchase order and packing slip.
This is a long way of asking, is there a tool that I can install that will tell me how many cells are contained in the battery? The battery, itself, does not state how many cells it contains. If it is a 6 cell, as I suspect, HP will be getting it back.
Couple of questions:
1. Does the 9 cell PROTUDE out the back and is it thicker than the normal 6 cell?
Would love to see a photo comparing both if possible.
2. Practically, in terms of percentage, how much more run time? 50%? 60%?
3. How much more weight?
I just noticed today that the "8" key of my notebook's keyboard has gone soft. I has lost that clickiness and the return response is not as tactile as it used to be or as other keys still have. When I press "8", it doesnt even feel like I touched the key. Otherwise, as of now, it is still working. I hope I made clear the issue I am having with the key.
My question:
Is this key about to go bad? Any solution for fixing it? If cleaning is needed, how do I clean it?
I just hope I wont have to replace the whole keyboard for the issue if the key stopped responding altogether.
hey everyone im a new Dell E6400 ATG owner and was wandering what would be a better option for my money? I already have a 9-cell battery and was wondering should I go with another 9-cell or get the 12-cell battery for extending my run time?
View 7 Replies View RelatedI have been using a microfiber (the ones you use on cars) but its not as good as a lens cleaner or the little naps that come with some HDTV's to keep the high gloss black fingerprint proof without scratching everything up.
View 3 Replies View RelatedSometimes when I startup or resume from standby I will get this horrible grinding type of sound from my fan. Someone told me that the fan in the AAO contacts part of the housing and causes this noise, but I was wondering if anyone else had this problem. I really don't want to open up my baby, but it will leave me no choice if this is a real problem (unless I can send it to Acer).
Also on a side note, AA1 Fan Control has been reading a constant 85C even though my CPU is only about 44C (according to HWMonitor). Is there a newer version of AA1 Fan Control out, or perhaps a better program? Thanks.
Fixed the AAO Fan Control. I just had to reinstall that port driver.
I went to Best Buy to look at a Studio 15 model. I noticed the surface around the mousepad where you rest your wrists....
It was warm and it felt really soft...almost a bit sticky soft. Is that because of the clear finish? I'd rather have a smooth surface than a soft sticky one.
Could this have been an anomily or would my model be like this if I bought one?
I went to Best Buy to look at a Studio 15 model. I noticed the surface around the mousepad where you rest your wrists....
It was warm and it felt really soft...almost a bit sticky soft. Is that because of the clear finish?
I'd rather have a smooth surface than a soft one that feels like the smushy like varnish hasn't completely dry. Could this have been an anomily or would my model be like this if I bought one?
Late last year, I spilled a substantial amount of soft drink onto my 9400.
It was under completecare, so the Dell tech came round and replaced the motherboard, keyboard and touchpad...he just cleaned everything else with isopropyl or something.
That was about a week before my warranty ran out....but the laptop was working fine, so I had no problem.
Now, a few months later, I am getting a lot of blue screens and errors all related to my video card.
I decided to open her up, clean the heatsink and fans and replace the AS5 on the CPU & GPU.
When I took the heatsink off the GPU (7900GS) I noticed a LOT of corrosion on several of the components on the GPU...obviously from the soft drink.
Now I know my warranty is out, but should my GPU have been replaced at the time, considering it was under complete care?
Should I be able to get it replaced by Dell now? I have emailed them, expaining the situation, to see what they can do, if anything.
I decided to give the PLL mod a try so I can overclock to 1.7GHz in my 1410. I got ahold of a soldering iron and an old motherboard that I practiced on, and it doesn't seem too bad once you get the hang of it.
Now that I've decided to go ahead, I try to take the case of my Aspire 1410 apart, and with all the screws removed, hard drive, memory, wireless card, I can pry the front of the case open ok, but as I get near the back (fan exhaust one side and lock/ethernet other) It seems locked in place somehow and don't want to break anything.
Is there a guide or service manual or something?
Anyone have any success finding a case or sleeve that fits your Timeline snuggly? I'm specifically looking for a 4810 sleeve but post up what you're using and Timeline model number.
View 4 Replies View RelatedI recently purchased an Acer Aspire 8730 with an 18.4" screen. Any idea where I can find a case for this monster? I have spend hours on the internet as well as visiting all of the local stores (Comp USA, Best Buy, Staples, Office Depot, etc) and can't find one big enough!
View 4 Replies View RelatedI'm not sure if this is the right forum for this. But I recently picked up a malware called AntiSpyware Soft I assume through the wireless connection. I have no idea how to remove it, although it becomes less harmful when run in safe mode and when you disable the lan settings in internet explorer.
Is there a free way of removing it that isn't super complicated?
I just bought this laptop 2 days ago. (on bestbuy). Out of the box, there was this soft scratchy noise from the HDD constantly ( with pauses now n then). I was not able to find any solution online. I tried different power plans and no change.
View 3 Replies View RelatedI'm working on an Extensa 5420 that has a broken plastic tab that holds the power jack in the lower case. Anyone had any luck with glue/epoxy (or some other techique) to secure the power jack in position so it won't fall inside the case?
View 6 Replies View Related