when i turn on my laptop this error appears when i log on to windows. it appears to be having a conflict with acer eAudio Manager as when i switch to another plan(like,games,or music>rock or smtn from the list) it doesn't change anything.and that error appears again.the sound was way better before,and i even had that 5.1 output,which i miss...
View 5 RepliesI've just done a clean install of Windows 7 64bit and installed the latest Realtek HD driver (2.42) from their site, selected 5.1 in the sound properties through Windows and Audio Manager but when I playback media the sound is still tinny and only 2.0.
I haven't installed anything else and let Windows find the other drivers for my 9600M GS etc
This is the second time I've installed the OS as facing the same problem before and thought it might have been a corrupt installation or something.
I have a Acer 6935G which I have recently installed Windows 7 on (x64). Windows found most of the drivers, audio included. I then downloaded the Windows Vista version of Launch Manager (version 2.0.0.2), and installed - and yes, everything worked great.
That is, until I found I had an issue with my microphone in Skype. I had ALOT of audio noise coming through when using the mic... I realised this was because the gain was up too high, however to reduce the microphone gain (or boost), it was impossible with the stock Windows 7 drivers.
So? I went to Realtek's website and downloaded the newest Realtek HD Audio driver - for Windows 7. I installed this, and then low and behold, in the Audio manager, I found that the mic boost was set to +20db! I removed this boost, and my audio issues were fix! Horray... Or at least, so I thought.
Upon doing this, I realised that the new Realtek audio drivers had some how stopped Launch Manager from working correctly. The "e", web and e-mail buttons all work fine, however the touch screen audio slider, mute button, etc. do not register when I press them.
Even before installing Launch Manager, on a fresh install, the mute button would work!
So this led me to go down the route that Launch Manager, and specifically the "Cinedash" part (volume controls etc) were trying to control the wrong audio device. In my audio devices, I have two "playback devices" listed, Speakers (on Realtek High Definition Audio) and Realtek Digital Output (also on Realtek High Definition Audio).
I went ahead and disabled the latter (Realtek Digital Output), but no, nothing... the controls on the cinedash still didn't do anything!
So, i decided I'd uninstall the Realtek drivers i'd just installed. After doing that? Nothing! The cinedash audio controls STILL don't control my audio!.......
I have a new Aspire 8935G with Realtek audio (AL889, if I read it well) and I'm not able to use digital output.
I tried using a common stereo jack to RCA cable, using just the left (black) RCA to plug into the digital COAX input of my ampilfier, but nothing came from the speakers.
Do you know how to setup the digital output of the Aspire?
I have a problem with my laptop and it's spdif optic output. I want to connect it to my hi-fi but I am having trouble with enabling digital output. I just don't know how to do it
In my Realtek Mixer there are options only for analog outputs - no digital options at all. I use now the newest drivers, 1.70 or 1.77 - nothing. I've tried older versions, something like 1.30 and then spdif flashed red colour and I thought that it will be OK, but nope. Still no sound and no digital options in Realtek's mixer. On these new drivers (1.7x) it doesen't ever light up.
Someone here said that one cannot acutally see the LED inside blinking, well... I can see it As I told before on older drivers it's "on" all the time - althou no sound.
In the other topics I've read that one has to change default output to digital output - I see no such option, if I am just blind and retarded then someone posting a screenshot would be nice
I'm having some issues playing games on my laptop Aspire 6935G.
I don't know if the laptop configuration is equal in all the world but here is my laptop Hardware:
Core2Duo 2.4Ghz
4Gb DDR3
320GB
Geforce 9600m GT 512MB dedicated
I'm having slowdowns after 10/20 minutes playing games like COD World at War and Red Alert 3, and the fan wont stop... even with the games in minimal configuration... Anyone have a clue of this? a fix maybe? I've played COD 4 Modern Warfare and it never gave me this problems ever...
anyone can confirm that these models really have the GDDR3 and DDR3 video ram and memory ram for the said models......coz i am quite confused because the HP dv5's and dv7's have the same specs as these models but the videocard of the hp's is not gddr3 and ddr3 respectively......what am i missing here..........are the video cards and memory ram types the same or acer is better coz its ddr3 already compared to the hp's ddr2 only memories?
coz right now am torn between this two brands....acer seems better in spec sheets coz it says the video n ram are both ddr3 already....thats better right??....anyways hope someone can shed light for me.....
I recently ordered an Aspire 7535-5020 with an Athlon 64 X2 cpu in it and when looking for more information about it I stumbled upon another forum where some people were talking about Windows 7 reporting that the cpu was actually a Turion. Anyone know anything about this?
Even looking at Acer's website it says this model has an Athlon 64 X2 Dual-Core in it. Would this be a Windows bug reporting the wrong thing, or the actual hardware is built using different components than what is marketed and sold?
I would like to hear others thoughts before I actually open the box when it gets here.
My ordered computer: Aspire 7535-5020
how can I disable the on screen display of the (green) volume bar? It forces to window whatever is playing full screen, games etc
View 5 Replies View RelatedI have an Acer Aspire 5672Wlmi and recently my battery went completely dead. I went to the Acer website to find out that they are out of stock which meant that I am out of luck. A quick search on amazon gave me some promising results and a few days ago I bought a battery that is an equivalent of the one I need.
If I try to boot the computer using the battery I get an error saying that I have the wrong battery and I should insert the correct battery and press any key. This message is shown immediately after the Acer logo flashes momentarily during the POST so I guess this restriction comes from Acer's BIOS. Right now it seems my chances of having the right battery are as high as being able to find a key that says "any" o my keyboard.
However I know that the battery is fine because it runs fine if I insert it once the latop has booted. Even if I remove the power plug after that it runs just fine. Also the fact that I am able to read the message when the latop is running only on battery is sufficient to convince me that my battery is fine and my BIOS is wrong.
My questions is, what should I do to fix this problem? I have already contacted the seller but I thought you guys might know more about how to fix this. I guess it would involve flashing the bios which is fine with me.
If it matters for the BIOS version, the laptop was bought in the UK.
My laptop is an Acer Aspire 6935G with Intel C2D P8400 2.26GHz (1066MHz FSB) and 4GB DDR3 RAM. OS is Vista Home Premium 32-bit.
Under the memory tab in CPU-Z, the DRAM Frequency shows as 399MHz. However, the maximum bandwith for the memory under the SPD tab shows as 533MHz. If I'm correct this means my RAM is running at 800MHz instead of 1066MHz.
I've read other threads mentioning this problem and a solution was a BIOS update to v1.10. My current BIOS is v1.05, which has been on my laptop since new.
I've never updated a BIOS before and therefore reluctant in case anything goes wrong. The laptop is running fine with Vista.
I have an Acer Aspire 6935G with Windows Vista Home Premium
The problem is that bluetooth does not start automatically after a cold start or restart.
I have too push BT button every time to activate bluetooth on my computer.
According to Acer, I should be able to set BT by the the Empowering Technology software that BT should start automatically.
But there is no setting for this? How can we solve this?
Is there perhaps any other solution? Perhaps in Windows Vista or driver?
I flashed the Bios (from Acer webpage vers. 1.10 to vers 1.13) on my notebook Acer Aspire 8930G - 864G64Bn. No I have a really big problem.
I can switch on my notebook and it shows the Acer empowering people screen, but stay there. Nothing happens. The only thing I can do is press F2 (is the only thing which is offered on the screen) But also there it just says please wait.... and nothing happens.
At the first time reboot after flashing I was able to enter the Bios, but since than I can't.
So I read a lot of using a usb thumb drive or an external floppy drive.
Will this work for my notebook and should I copy just the .FD file on it?
My touch senstive volume control on my 6935g wont work, its frozen, i tired turning the laptop off, no buttons work, It is stuck on hold
View 4 Replies View RelatedI downloaded the bios update for this model from acer.co.uk site.
My bios is 1.4 latest is 1.10.
I ran insydeflash as instructed by the .txt file and it froze my laptop the mouse or nothing could be pressed
It just said intialising for about 20 mins. In the end i had to pull the battery and hope no harm was done. Was a tense moment but luckily my laptop came out alive
Anyone know of this happening before or how i could stop it from freezing?
THE PERFORMANCES OF ASPIRE 6935G
Model : 1366x768, CPU Centrino2 P8600 2.4GHz, nVidia 9600MGT 512Mo, DDR3 RAM 2GB, HDD 320GB, Windows Vista Ultimate 64Bits:
PERFORMANCES OF 9600M GT
GPU-Z:
3D MARK 06 Score at native resolution 1366x768 is 5690
3D MARK 06 Score at resolution 1024x768 is 6390
Cinebench 10 score is 5472.
I'm not so much into gaming, but I like games like Left 4 Dead and I was able to play it with this 9600M GT with nice graphics and anti-aliasing (2x).
NEW 12-01-2009 COD 5 Bench
I've made a bench of COD5 and that was quite good. I've let all the default settings but use native resolution (1366x768) Vertical Sync and AA2x. I've used FRAPS to get the frame rate and the average was around 30-35fps, the lower rates was about 18fps during multiple explosions close to 4 tanks. We still can get more fps by lowering the resolution to 1280x720, but I wanted to test with the native resolution................
The entertainment part on the laptop on the left hand side the touchpad has somewhat frozen so it is impossible to use, it has put itself ontohold somehow and now will not work, i have attempted restarting the laptop and shutting it down completly still the touch pad will not work.
View 7 Replies View RelatedI have an Acer Aspire V5-473P-5602. It's just over 2 months old. It's been for repair twice, and both times the repair does not solve the original problem.
Â
The issue is this... I will charge the computer to 100%. While using, the battery indicator will show different values at different times. Basically all over the map. Once the indicator gets down to 30% or so , I'm in the "shut down" zone where the computer will shut down because there is actually little or no power left in the battery though its says 30% or 24% or whatver value it may be.
Â
Again this has been to the Acer Repair Shop to be "repaired" twice so far. They changed the Mainboard ( Motherboard I assume) TWICE so far and the problem STILL persists. I can't even get to the "Low or Critical" battery warnings ( currently set at 15% and 5%) because it shuts down before reaching those levels.
The microphone is "active" all the time, touching the area around it and you can hear it through the speakers. Opening the Realtek device manager and the Mic is ticked in the top row of three "Speakers (ticked) Digital out (unticked) and Mic (Ticked). How do you turn it off ?
View 5 Replies View RelatedI wonder if i can use expresscard/34 in a expresscard/54 on an Acer Aspire 6935G?
Someone who has tried?
I am looking for a better network card than the one sitting in my computer (Intel 5100 HUSK) not functioning fully, can not get the 150-270 Mbit / s. but it's on 65 Mbit / s.
if there's any new realtek drivers for the 6920g, Ive done multiple search's myself and came up with nothing
I ask because whilest playing games or just listening to music every so often (well pritty regulary actualy) the sound just becomes verry distorted and unplayable untill I restart the app/game. I have tryed to install the latest official realtek driver 2.06 (not acer's version), I now know this was'nt the smartest of moves on my part as the sound then became verry tinny witch i now know was because the normal realtek driver's dont account for the ''tuba'' in acers.
With my PC I can record streamed audio via Audacity. However I can only see the microphone as an input source for I/O inputs. I have looked at all settings and cannot find anything relevant. It seems you cannot also run the Realtek control panel presumably this is a Acer configuration.
View 5 Replies View RelatedI have an ACER Aspire 9413 (9410 Series) laptop..
After a little problems i decided to format everything and reinstall Windows XP Service Pack 2.
Oke Everything went fine untill now:
When i install my driver the Realtek High-Definition Audio from official website of Acer. The install does everything fine, after reboot: No Sound...
In the hardware stuff i can't find anything of the installed driver (realtek). I know its This driver i need, because i had it working a while ago before i formatted my laptop...
Is there any chance to overclock the cpu on 6935g?
View 8 Replies View RelatedGot the laptop yesterday Was going to change to XP straight away but Vista isn't as bad as i remember....but need it for a couple of things still. Going to try and install on the other partition that was already there and i found most of the drivers i need.
However I get the blue screen after its loads the XP cd before i can do anything, saying about checking for virusus and faulty HDD or something. I think i read about having to include the XP drivers on the XP cd or something
My HDD is running at 51'C at idle.
I've noticed there is like a silver foil/plastic over the enclosure should i remove this? the temps seem really high.
Recently I developed this simple application that lets you easily configure CineDash and other buttons functions on Acer laptops. This application, “Acer CineDash Config”, is mainly for mine purposes.
I tested it on my Acer 6935G and Windows 7 64bit version. It probably should work on other models and systems to.
Some of the features that Acer CineDash Config supports are:
•32bit and 64bit systems
•Configuring applications to run and captions for buttons:oArcade DeluxeoEmpowering tech.oInternetoE-Mail•Making and restoring registry backup
•Enabling media keys to work with other programs, like winamp, and restoring original key mapping file
Here's screenshot of it:
My main aim is to playback Blu-ray ripped movies from 6935g and output to projector via hdmi.
When projector is connected to 6935g, yeah, it detected the projector and the desktop appears on the projector screen, that's the easy part 6935g downsized to 1280x720p automatically, guess that is because my pj only supports 720p and not 1080p, need to start save again for a 1080p pj,
Now the big question
Powerdvd playback the movie on the 6935g screen but the powerdvd on the pj screen is black in color, no movies
I use powerdvd instead of acer arcade deluxe because the latter does not play Blu-ray ripped movies, also the acer arcade does not play blu-ray disc from the blu-ray drive, it says graphic driver not compatible it does however play the demo disc when pj not connected
After reading great reviews about it, I took the plunge and bought the 6935G last week.
Its a fantastic machine and I'm really delighted with it apart from one major problem - I can't get Windows Media Player 11 to run at all.
The installation of Vista SP1 appeared to go well and the machine seems to be operating perfectly in all other ways (apart from the sidebar not displaying gadgets properly which does not bother me much).
I can see WMP included in the list of programs when I click on the start menu and I can also see it in my "C" drive under Program Files but when I attempt to run it nothing at all happens. The blue circle appears for 1 or 2 seconds then disappears - thats all that happens.
I'm not sure if this is related but when I go to the Music section of Windows Media Center I get the message "A necessary component of Windows Media Center is currently not available "
As I'm a "silver surfer" with limited computer knowledge, I'm probably doing something stupid (or maybe forgettiing to enable something) but I would really appreciate help in getting WMP 11 to work on this otherwise fantastic machine.
As I use WMP to manage my music, its important to me.
Are there any programs out there? I believe it uses the same PLL as the 5930g.
View 6 Replies View Related