The microphone is "active" all the time, touching the area around it and you can hear it through the speakers. Opening the Realtek device manager and the Mic is ticked in the top row of three "Speakers (ticked) Digital out (unticked) and Mic (Ticked). How do you turn it off ?
View 5 RepliesI've just done a clean install of Windows 7 64bit and installed the latest Realtek HD driver (2.42) from their site, selected 5.1 in the sound properties through Windows and Audio Manager but when I playback media the sound is still tinny and only 2.0.
I haven't installed anything else and let Windows find the other drivers for my 9600M GS etc
This is the second time I've installed the OS as facing the same problem before and thought it might have been a corrupt installation or something.
if there's any new realtek drivers for the 6920g, Ive done multiple search's myself and came up with nothing
I ask because whilest playing games or just listening to music every so often (well pritty regulary actualy) the sound just becomes verry distorted and unplayable untill I restart the app/game. I have tryed to install the latest official realtek driver 2.06 (not acer's version), I now know this was'nt the smartest of moves on my part as the sound then became verry tinny witch i now know was because the normal realtek driver's dont account for the ''tuba'' in acers.
With my PC I can record streamed audio via Audacity. However I can only see the microphone as an input source for I/O inputs. I have looked at all settings and cannot find anything relevant. It seems you cannot also run the Realtek control panel presumably this is a Acer configuration.
View 5 Replies View Relatedwhen i turn on my laptop this error appears when i log on to windows. it appears to be having a conflict with acer eAudio Manager as when i switch to another plan(like,games,or music>rock or smtn from the list) it doesn't change anything.and that error appears again.the sound was way better before,and i even had that 5.1 output,which i miss...
View 5 Replies View RelatedI have a Acer 6935G which I have recently installed Windows 7 on (x64). Windows found most of the drivers, audio included. I then downloaded the Windows Vista version of Launch Manager (version 2.0.0.2), and installed - and yes, everything worked great.
That is, until I found I had an issue with my microphone in Skype. I had ALOT of audio noise coming through when using the mic... I realised this was because the gain was up too high, however to reduce the microphone gain (or boost), it was impossible with the stock Windows 7 drivers.
So? I went to Realtek's website and downloaded the newest Realtek HD Audio driver - for Windows 7. I installed this, and then low and behold, in the Audio manager, I found that the mic boost was set to +20db! I removed this boost, and my audio issues were fix! Horray... Or at least, so I thought.
Upon doing this, I realised that the new Realtek audio drivers had some how stopped Launch Manager from working correctly. The "e", web and e-mail buttons all work fine, however the touch screen audio slider, mute button, etc. do not register when I press them.
Even before installing Launch Manager, on a fresh install, the mute button would work!
So this led me to go down the route that Launch Manager, and specifically the "Cinedash" part (volume controls etc) were trying to control the wrong audio device. In my audio devices, I have two "playback devices" listed, Speakers (on Realtek High Definition Audio) and Realtek Digital Output (also on Realtek High Definition Audio).
I went ahead and disabled the latter (Realtek Digital Output), but no, nothing... the controls on the cinedash still didn't do anything!
So, i decided I'd uninstall the Realtek drivers i'd just installed. After doing that? Nothing! The cinedash audio controls STILL don't control my audio!.......
I have an ACER Aspire 9413 (9410 Series) laptop..
After a little problems i decided to format everything and reinstall Windows XP Service Pack 2.
Oke Everything went fine untill now:
When i install my driver the Realtek High-Definition Audio from official website of Acer. The install does everything fine, after reboot: No Sound...
In the hardware stuff i can't find anything of the installed driver (realtek). I know its This driver i need, because i had it working a while ago before i formatted my laptop...
I have a new Aspire 8935G with Realtek audio (AL889, if I read it well) and I'm not able to use digital output.
I tried using a common stereo jack to RCA cable, using just the left (black) RCA to plug into the digital COAX input of my ampilfier, but nothing came from the speakers.
Do you know how to setup the digital output of the Aspire?
I have a problem with my laptop and it's spdif optic output. I want to connect it to my hi-fi but I am having trouble with enabling digital output. I just don't know how to do it
In my Realtek Mixer there are options only for analog outputs - no digital options at all. I use now the newest drivers, 1.70 or 1.77 - nothing. I've tried older versions, something like 1.30 and then spdif flashed red colour and I thought that it will be OK, but nope. Still no sound and no digital options in Realtek's mixer. On these new drivers (1.7x) it doesen't ever light up.
Someone here said that one cannot acutally see the LED inside blinking, well... I can see it As I told before on older drivers it's "on" all the time - althou no sound.
In the other topics I've read that one has to change default output to digital output - I see no such option, if I am just blind and retarded then someone posting a screenshot would be nice
My Father has given me his Acer Aspire 5315. It is full of stuff i dont even need. It is quite slow aswell. I was just wondering is there a way i can delete all programs but keep Windows. I would like it so it exactly how it was in it came out of the box with all drivers installed. I only want to do this because i dont have a Windows Vista Disc or any Driver's for the laptop.
View 5 Replies View RelatedNo matter what I do it will not take a microphone. The mic is working, I plugged it into an amp. It can't be the connector as I just got a new one today and tried it on the Aux input of a headphone amp.
This is absolutely ridiculous. I remember having this trouble before. I can't even seen to access "line in" as an option when recording anymore either. What's going on? I need to record some stuff and I can't use the crappy in built mic for that.
When I speak through Skype, my microphone is buzzing, and I sound like an old radio or something. But when I pull the AC out, my voice 100% clear with no buzzing! I can't figure out why. I have checked the settings, but there are no changes at all?
I have tried to update to all kind of Realtek drivers, and I have done several system recoveries -
my Acer Extensa 4420. A few days ago while on my laptop the BSOD suddenly popped up and my laptop shut down. A restarted it and while it did log in, I got notices saying a lot of stuff was corrupt. I ran chkdsk to see if i could diagnose the issue, and it stated the system volume was corrupt. As time went by using windows became erratic. I decided to try to restore my acer back to factory settings using the eRecovery program. This program would stop working every time right before the process began. Eventually windows stopped booting up at all. leaving my at a boot screen the endlessly looped. I installed Ubuntu shortly after, and managed to get my PQSERVICE partition recognized by the GRUB bootloader and Ubuntu itself (as a mounted drive). The problem is that whenever I do boot to the PQSERVICE partition and look through the options in the recovery center, there is no restore to factory default settings.
View 8 Replies View RelatedThe display on my Acer 7750G siwtches off after 5 minutes or so, regardless of how I configure the power settings.
View 2 Replies View RelatedI was testing out my microphone and I noticed that the sound is really staticy. I figure its some electrcal interference coming from somewhere. I muted every other sound input and changed physical locations. But the recordings I make sound like old staticy records.
I also turned down the record level down to 40 and boost level of the mic to 0dB but it will won't go away.
Is there really no way to use an external microphone without purchasing one of those USB-pens to transfer it through that?
The in-built microphone is dreadful, and I recently bought a microphone. I thought every laptop nowadays had an input for microphones. The AA e1-522 doesn't, or am I missing something? Why remove it in the first place...?
Vista's defafault settings for "Power Saver" sets the minimum and maximum processor state as ZERO percent for battery. I don't understand this. If I open performance monitor the processor is shown as 80% max on AC power. If I disconnect the AC power while on "Power Saver" the monitor shows 40% max frequency. Why ZERO percent as default settings, to me that would mean it wouldn't even run.
Certainly for running light stuff it runs a lot cooler, the fan hardly cutting in at all.
How do I access the Advance setting in BIOS on Acer aspire 5332 ?I can access bios via the f2 button on startup but there is no advance tab being displayed.
View 1 Replies View Relatedwhere is Virtualization Technology BIOS setting in aspire v5-561-6607
View 6 Replies View RelatedI am being asked for a System Start Up password on my son's ACER V5 but do not remember ever setting one up.
View 3 Replies View RelatedLast week I dropped my 3810TZ from a table and the LCD panel hinge cracked. Then I got a call from Acer about the mike cable overheat repair and if I wanted to send it in. I thought just do it and went for it.
I put a sticker over the broken hinge that just said 'repair?' and send the machine in.
Today it came back with a brand new LCD panel!
I have Aspire V3-471, my laptop microfone not working , looking for driver for windows7, me recently install windows7 on my laptop.
View 2 Replies View Relatedwhen I try to record from the Microphone, there is a loud hum and crackling noise in the recording. I can barely hear myself talk.
I recently discovered that if I turn my Screen off by pressing Fn+F6, the background noise immediately goes away. But this is impractical when using the Camera.
And please no, "built in mics are cheap buy a external one comments"
I've just bought an Acer Aspire 5920G and the Crystal Eye webcam works perfect with MSN and so does the internal microphone. However, I've started hosting a show on an Internet radio and the sound quality from the internal mic is too low. Therefore I bought a microphone that I plugged in the appropriate jack on the laptop (next to the jack for the headphones) but when recording or broadcasting it seems that my laptop uses BOTH the external and the internal mic. Could anybody tell me how to DISABLE the internal mic and use the external instead?
I've tried to disable the Crystal Eye from the Device Manager on Windows Vista but that doesn't solve the problem. I've also tried to modify the settings from the recording devices but the LineIn is not plugged in. I'd just like to plug a mic and use that instead of the webcam's one. Any help would be really appreciated as I have to host a show in 2 days and I don't have a clue on how to solve this problem.
I own an Acer Aspire R7-572G which has a combined 4-pin 3.5mm headset jack.
I would like to use a normal microphone with an 3.5mm connector. The microphone did not work by directly plugging the connector into the socket, therefore I bought an adapter which splits the 4-pin output into speaker & microphone sockets.
Now the microphone does work properly, however, unless I am connecting external speakers I am not able to use the internal notebook speakers. (maybe because the notebook assumes that a headset is plugged in)
>>> Is there a way to use my external microphone and the internal notebook speakers?
One more thing to mention: If I plug in the cable, a popup on the notebook appears asking which device I just plugged in. Sadly my only three options are "headphones", "speaker output" or "headset". NO MICROPHONE OPTION !!!
I am not good at this, but my microphone has stopped working. When using Skype I can hear the conversation no problem. They cannot hear me.
View 3 Replies View RelatedBefore I Upgrade My Pc It Was Workin All Good
View 5 Replies View RelatedI have a dv7-1025nr, I used to run XP SP3 on it and it worked great, but I have to pass the laptop on to my brother and I am getting a dv7-2000. So I had to reinstall Vista, tried x64, everything works except Realtek LAN. It is only detected in Safe Mode, in Normal Mode or even in Safe Mode with Networking, the LEDs for activity stop lighting up during Vista loading.
I tried Vista x86, same problem. I tried XP SP3 again, LAN is there, no problems at all.
I tried Vista x64 again, Safe Mode, LAN works perfect, I can even browse the net.
What the heck is going on ? I tried all possible driver combinations, unless in Safe Mode, all drivers say the hardware is not even present.
I get random crashes and the apparent crashes I get all relate to this error message:
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (rtlh86.sys, rtlh64.sys)
This problem was caused by a missing driver for Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (rtlh86.sys, rtlh64.sys), which was created by Realtek Semiconductor Corp.
According to the spec sheet for my laptop and Hp's website this is what I have on my laptop: Realtek RTL8101 Family PCI-E Fast Ethernet NIC rather than the 8168.
Could this conflicting information be the source of the problem? How come Windows shows a different NIC to the HP website? I've tried to download the driver off the Realtek website but I find the website frustratingly annoying and basically pants (for such a global player)!
I have a Stream 11 with Windows 8.1 I can't find the Realtek equalizer in the Control Panel. Where is it?
View 8 Replies View Related