Acer Aspire R7-572G :: Only Use Microphone On 4-pin 3.5mm Headset Output
Sep 16, 2014
I own an Acer Aspire R7-572G which has a combined 4-pin 3.5mm headset jack.
I would like to use a normal microphone with an 3.5mm connector. The microphone did not work by directly plugging the connector into the socket, therefore I bought an adapter which splits the 4-pin output into speaker & microphone sockets.
Now the microphone does work properly, however, unless I am connecting external speakers I am not able to use the internal notebook speakers. (maybe because the notebook assumes that a headset is plugged in)
>>> Is there a way to use my external microphone and the internal notebook speakers?
One more thing to mention: If I plug in the cable, a popup on the notebook appears asking which device I just plugged in. Sadly my only three options are "headphones", "speaker output" or "headset". NO MICROPHONE OPTION !!!
I have an HP Envy 14-1111 nr notebook with Windows 7, and I have always had problems with microphones working. I plug in my headset and put the plugs into the correct ports, including putting the Mic plug into the port with a picture of a headset/mic. I also put the audio plug into the correct port.
The audio always works fine- I can hear things properly coming from the headphones. But the mic NEVER WORKS. I've made sure that the mic is enabled, and I've set the headset mic as the default recording device, and made sure it's not muted, and even tried like 3 different types of headsets, but it still doesn't work.
My computer recognizes that my headset has a mic when I plug it in, because the independent headset microphone pops up on my recording devices. But no matter how much noise I make into the mic, my computer doesn't recognize any of it. It is basically saying that it can't detect any sound from the mic.
I just bought new headset for my Lenovo G505S + adapter(mic jack + audio jack in one output) but when I speak microphone on headset is not working but in-built microphone is capturing sound. I checked Smartaudio settings setted on headset option on configuration of conector and neither of theese microphone was working so I set back default.
I had tried that already, sadly still stale results with no change. Tomorrow I'm planning on buying different HDMI cables to see if it's a hardware issue, I don't want to take my computer in if it's happening to all three (I read somewhere that it may be the cord itself) .....
this all started when I first purchased my laptop (Aspire V3-572G-54S6, Windows 8.1) when it was on sale for a great price in mid-August. I had heard great things about Acer, loved the specs and look, and was excited to get it. It arrived a few days later, took it out of the box and with the first start up my display was messed up. About 1/4 up the screen tear a little and the top of the screen was being duplicated at the bottom........never had that happen before so I got in touch with Acer support chat, I updated video drivers, rebooted, did a complete power drain, etc. The problem persisted so they had me send it in for servicing. I got it back from servicing just about 2 weeks ago, and it was fixed! Or at least it was until this past Wednesday when the problem returned. Now the problem only occurs when I've had it on for 30minutes to 1 hour, as it is fine on start up. The service log/sheet I got back with it said all they did was software updates, updated BIOS, and nothing hardware related.
I have got my hard drive replaced under warranty. Now i have installed a fresh copy of windows 8.1. The drivers of wireless have been installed by windows. Its Broadcom 802.11ac version 6.30.223.102.
I got an E1-572G Acer Laptop and I'm having a problem with it.When I press SHUT DOWN the screen goes black but the power led is on.. and I can't turn it ON because I have to press the POWER BUTTON for about 5 seconds then all the led-s turn off and then I can start it. I searched on Google, made a few changes in settings (FAST STARTUP, etc) but I'm having still the same problem. I have this problem about 2 weeks, and I'm really nervous about it.
I've tried disabling certain services, which seemed to work but only for a little while. Is 5400 rpm's too slow to run Windows 8.1 just because of all the programs and services that run in the background?
I have a brand new Acer Aspire V3-572G. Its been a bit of a lemon so far, but I will give it the benefit of the doubt for just a while longer as I'm not particularly tech-savvy so perhaps the problem is me. Yesterday the volume icon (on the bar at the bottom of the screen) stopped working altogether. I can press it with the curser and it changes colour in the way it should when you click on something ... BUT nothing comes up ... no sound/volume control thing that I can adjust. I know I can use the Function key and arrows, but that is just fiddly, and for a brand new computer, I expect things to work.
I have a Acer Aspire V5-572G running Windows 8.1 and have found that the microphone jack won't recognise any external mic that is placed into it. It won't detect on the sound option despite the fact all the drivers are updated.
I have a new aspire E1-572G that won't shutdown completely over an update to windows 8.1 ... I've Updated the Bios and downloaded the drivers from the support site.
I've done a recovery to default factory settings and tried again......no luck
I installed windows 8.1 after i installed al windows updates.
Just got this Lpatop, popped battery in, plugged it in. I turn it on, keyboard backlight comes on, the fans spin up, nothing comes on the screen. Nothing is coming out of the HDMI port, really frustrated at this point as this is the second Acer laptop i bought that had issues (granted first one was used so I gave Acer a pass).
My laptop is Acer Aspire E5-572G. Im having problems connecting a Samsung 840 EVO SSD through a 2nd disk caddy.
I mean, it cannot be recognized at all even in BIOS. I am thinking to install new BIOS system , but when searching for it , I don't find anything and I don't want to flash wrong BIOS update.
[URL]] ....
It is exactly this model , I have entered the serial number I got from Ace's system information software. Any way to recognize the 2nd disk caddy along with the SSD?
I have a new E1-572G laptop. Long story short, I installed Win 7 on it, and after that, Ubuntu 14.10. I had issues with bootloader, but after fiddling around with legacy/UEFI booting, secure boot, and things like that, I almost successfully configured the laptop. When I selected the ubuntu uefi bootmgr in the bios, in secure boot mode, I rebooted the laptop for what I thought the last time, but then it did not go past the Acer logo. Only combination that works is ctrl+alt+delete. If I remove the hdd, then the acer logo flashes for half a second, and a black screen appears, with a static console cursor at the left upper corner.
I searched a lot in the topic, wanted to reset the bios, but there is no jumper for this, nor can I remove the bios battery. I wanted to reflash the bios, but I could not find proper instructions on this.
Just got this Laptop, popped battery in, plugged it in. I turn it on, keyboard backlight comes on, the fans spin up, nothing comes on the screen. Nothing is coming out of the HDMI port, really frustrated at this point as this is the second Acer laptop I bought that had issues (granted first one was used so I gave Acer a pass).
Anything I can do to fix this or is it just dead and send it back?
I have a brand new Acer Aspire E1-572G. It has 1TB HDD and with no partitions. So I want to create partitions as I wish, but before that, I would like to know if the recovery option will work if I alter the default HDD structure. Before I have failed with restoring after creating partitions with some other brands.
I have a Acer Aspire V5-572G running Windows 8.1 and have found that the microphone jack won't recognise any external mic that is placed into it. It won't detect on the sound option despite the fact all the drivers are updated.
I needed to use Windows resore. after restart, the acer logo dont show and laptop stay in black screen and HDD LED blink in aqual time slice. Then after a few minutes acer logo shown and Windows starts.
This, happend few times but now acer logo dont show and it stay in black screen .
After upgrading to Windows 8.1 x64 bit, my bluetooth is not detecting and cannot be detected by other devices (my mobile phone). In device manager, I have NO yellow triangles with exclamation marks, when I search automatically for updates, windows says everything is up to date (see picture below) so everything seems fine and running. Bluetooth is on but after searching does not find devices (even if the phone is also on bluetooth).
I have an Acer Aspire V3-572g. My laptop came with windows 8.1 installed already. Currently, my pc is being reset to factory settings because I can not figure out how to keep the hdmi from going out after windows updates. The only way I can keep get the hdmi port to work is the factory reset it. The only way from keeping the hdmi working is by turning off windows updater. However, I'd like to figure out how to keep the hdmi working without doing so. My graphics card is Nvidia 840 M. Here are a list of things I've done after my laptop stops recognizing the hdmi.
Uninstall and reinstall the display drivers, both from intel and Nvidia Update the drivers to be up to date Downloaded intel's utility manager to keep driver update to date Downloaded factory installed drivers from Acer's website Contacting microsoft and have them remotely connect to my laptop Restored back my laptop to previous working conditions (although the hdmi never worked by going to a restore point) Swapped hdmi cords and displays
After several hours of researching and trying different things I'm stumped. I bought this computer with the sole purpose of connecting it to a TV. I've also had this issue with another laptop which I returned. This problem isn't a hardware problem as I'm connected to the same monitor with an old desktop using the same cords. I'm guessing there is a compatability issue with windows and the display drivers when there is an update.
I recently bought Acer aspire E15 model E5-572G-5577 which came with i5-4210m (2.6 to 3.2Ghz),8GB RAM,Nvidia GeForce 840M 2GB dedicated VRAM,1TB HDD and freeDOS. Since i recieved Win8.1 x64 for my Birthday i bought this laptop without windows and installed 8.1, as Acer claims that fully supports this OS.
Everything was ok in installation and i even installed HD4600 driver but when installed Nvidia driver although it looked ok and it was shown in device manager the graphic card wasn't show in my display (only HDGraphics) and in nvidia control panel i had only the 3D settings option but still it seems that 840M hasn't kicked in.
I assume its the driver so after many attempt with different drivers i still have the same issue. The laptop is brand new and in OEM 8.1 it seems to work but not for all of us that have a bought copy of Windows. I have wasted so much money on a Acer with 840M GPU that wont work.
Is there really no way to use an external microphone without purchasing one of those USB-pens to transfer it through that?
The in-built microphone is dreadful, and I recently bought a microphone. I thought every laptop nowadays had an input for microphones. The AA e1-522 doesn't, or am I missing something? Why remove it in the first place...?
I've just bought an Acer Aspire 5920G and the Crystal Eye webcam works perfect with MSN and so does the internal microphone. However, I've started hosting a show on an Internet radio and the sound quality from the internal mic is too low. Therefore I bought a microphone that I plugged in the appropriate jack on the laptop (next to the jack for the headphones) but when recording or broadcasting it seems that my laptop uses BOTH the external and the internal mic. Could anybody tell me how to DISABLE the internal mic and use the external instead?
I've tried to disable the Crystal Eye from the Device Manager on Windows Vista but that doesn't solve the problem. I've also tried to modify the settings from the recording devices but the LineIn is not plugged in. I'd just like to plug a mic and use that instead of the webcam's one. Any help would be really appreciated as I have to host a show in 2 days and I don't have a clue on how to solve this problem.
