I have a Acer Aspire V5-572G running Windows 8.1 and have found that the microphone jack won't recognise any external mic that is placed into it. It won't detect on the sound option despite the fact all the drivers are updated.
View 1 RepliesI have a Acer Aspire V5-572G running Windows 8.1 and have found that the microphone jack won't recognise any external mic that is placed into it. It won't detect on the sound option despite the fact all the drivers are updated.
View 1 Replies View RelatedBought Acer E5-572G NX.MQ0EL.005.
It has 4 gb RAM(Samsung 12800 1600mhz) then bought one stick - Crucial 4GB DDR3 PC3-12800 CL11 SO-DIMM CT51264BF160BJ.
Place it into second free slot.
Result - BIOS shows only 4 GB RAM and Windows shows same 4 GB RAM(something aroung 3.8 GB)
Tried to replace second ram stick but same result.
Bought Acer E5-572G NX.MQ0EL.005.
It has 4 gb RAM(Samsung 12800 1600mhz) then bought one stick - Crucial 4GB DDR3 PC3-12800 CL11 SO-DIMM CT51264BF160BJ.
Place it into second free slot.
Result - BIOS shows only 4 GB RAM and Windows shows same 4 GB RAM(something aroung 3.8 GB) Tried to replace second ram stick but same result.
I have a new aspire E1-572G that won't shutdown completely over an update to windows 8.1 ... I've Updated the Bios and downloaded the drivers from the support site.
I've done a recovery to default factory settings and tried again......no luck
I installed windows 8.1 after i installed al windows updates.
After upgrading to Windows 8.1 x64 bit, my bluetooth is not detecting and cannot be detected by other devices (my mobile phone). In device manager, I have NO yellow triangles with exclamation marks, when I search automatically for updates, windows says everything is up to date (see picture below) so everything seems fine and running. Bluetooth is on but after searching does not find devices (even if the phone is also on bluetooth).
View 9 Replies View RelatedI have an Acer Aspire V3-572g. My laptop came with windows 8.1 installed already. Currently, my pc is being reset to factory settings because I can not figure out how to keep the hdmi from going out after windows updates. The only way I can keep get the hdmi port to work is the factory reset it. The only way from keeping the hdmi working is by turning off windows updater. However, I'd like to figure out how to keep the hdmi working without doing so. My graphics card is Nvidia 840 M. Here are a list of things I've done after my laptop stops recognizing the hdmi.
Uninstall and reinstall the display drivers, both from intel and Nvidia
Update the drivers to be up to date
Downloaded intel's utility manager to keep driver update to date
Downloaded factory installed drivers from Acer's website
Contacting microsoft and have them remotely connect to my laptop
Restored back my laptop to previous working conditions (although the hdmi never worked by going to a restore point)
Swapped hdmi cords and displays
After several hours of researching and trying different things I'm stumped. I bought this computer with the sole purpose of connecting it to a TV. I've also had this issue with another laptop which I returned. This problem isn't a hardware problem as I'm connected to the same monitor with an old desktop using the same cords. I'm guessing there is a compatability issue with windows and the display drivers when there is an update.
ive got a slight problem with my laptop. 2-3 months ago i added an addition gig of ram to my acer aspire 3050 for a total of 1.5gbs. it was the correct type of ram(i made sure it was the same as what was already in there). for some reason the computer will recognize that the ram has been placed in the slot but it does use it at all. when i am running programs will it will still draw what's needed from the hard drive even though peak usage rarely surpassed 700mb of ram. was there something i was supposed to activate/adjust after installing the ram?
and another disconcerting thing is that since i installed the ram the fan is on fullblast 100% of the time and the machine heats up almost to the point of overheating really fast even when doing basic things like surfing the web
I have been searching for days for Blu-ray help. Apparently after everything I've looked at, ACER really screwed up their ads of blu-ray on computer. Because, even though my notebook should play blu-rays....it wont even recognize the disc. It tells me there is nothing there. I am getting really fustrated that there are no drivers or any other useful help out there.
View 6 Replies View RelatedI had tried that already, sadly still stale results with no change. Tomorrow I'm planning on buying different HDMI cables to see if it's a hardware issue, I don't want to take my computer in if it's happening to all three (I read somewhere that it may be the cord itself) .....
View 4 Replies View Relatedthis all started when I first purchased my laptop (Aspire V3-572G-54S6, Windows 8.1) when it was on sale for a great price in mid-August. I had heard great things about Acer, loved the specs and look, and was excited to get it. It arrived a few days later, took it out of the box and with the first start up my display was messed up. About 1/4 up the screen tear a little and the top of the screen was being duplicated at the bottom........never had that happen before so I got in touch with Acer support chat, I updated video drivers, rebooted, did a complete power drain, etc. The problem persisted so they had me send it in for servicing. I got it back from servicing just about 2 weeks ago, and it was fixed! Or at least it was until this past Wednesday when the problem returned. Now the problem only occurs when I've had it on for 30minutes to 1 hour, as it is fine on start up. The service log/sheet I got back with it said all they did was software updates, updated BIOS, and nothing hardware related.
View 3 Replies View RelatedI have an aspire v3 572g 55FT and when I go to bios I find that under security the HDD password is frozen. How do I fix this?
View 1 Replies View RelatedI have got my hard drive replaced under warranty. Now i have installed a fresh copy of windows 8.1. The drivers of wireless have been installed by windows. Its Broadcom 802.11ac version 6.30.223.102.
View 9 Replies View RelatedI got an E1-572G Acer Laptop and I'm having a problem with it.When I press SHUT DOWN the screen goes black but the power led is on.. and I can't turn it ON because I have to press the POWER BUTTON for about 5 seconds then all the led-s turn off and then I can start it. I searched on Google, made a few changes in settings (FAST STARTUP, etc) but I'm having still the same problem. I have this problem about 2 weeks, and I'm really nervous about it.
View 4 Replies View RelatedI own an Acer Aspire R7-572G which has a combined 4-pin 3.5mm headset jack.
I would like to use a normal microphone with an 3.5mm connector. The microphone did not work by directly plugging the connector into the socket, therefore I bought an adapter which splits the 4-pin output into speaker & microphone sockets.
Now the microphone does work properly, however, unless I am connecting external speakers I am not able to use the internal notebook speakers. (maybe because the notebook assumes that a headset is plugged in)
>>> Is there a way to use my external microphone and the internal notebook speakers?
One more thing to mention: If I plug in the cable, a popup on the notebook appears asking which device I just plugged in. Sadly my only three options are "headphones", "speaker output" or "headset". NO MICROPHONE OPTION !!!
I've tried disabling certain services, which seemed to work but only for a little while. Is 5400 rpm's too slow to run Windows 8.1 just because of all the programs and services that run in the background?
View 3 Replies View RelatedI have a brand new Acer Aspire V3-572G. Its been a bit of a lemon so far, but I will give it the benefit of the doubt for just a while longer as I'm not particularly tech-savvy so perhaps the problem is me. Yesterday the volume icon (on the bar at the bottom of the screen) stopped working altogether. I can press it with the curser and it changes colour in the way it should when you click on something ... BUT nothing comes up ... no sound/volume control thing that I can adjust. I know I can use the Function key and arrows, but that is just fiddly, and for a brand new computer, I expect things to work.
View 3 Replies View RelatedA friend brought me a Aspire 3023WLMi few weeks ago. Problem: Unable to boot. BIOS didn't recognize harddrive. I switched it to another laptop which reported SMART-error. I replaced it with another harddrive. Now BIOS still won't recognize harddrive or DVD-drive (can't remember if it recognized DVD earlier with original harddrive). I can't open DVD-drive, so obviously it's not getting any power. if this a sign of broken MB, or just loose cabling? Or something else? If it's loose cabling, how to check it?
View 4 Replies View RelatedJust got this Lpatop, popped battery in, plugged it in. I turn it on, keyboard backlight comes on, the fans spin up, nothing comes on the screen. Nothing is coming out of the HDMI port, really frustrated at this point as this is the second Acer laptop i bought that had issues (granted first one was used so I gave Acer a pass).
View 1 Replies View RelatedMy laptop is Acer Aspire E5-572G. Im having problems connecting a Samsung 840 EVO SSD through a 2nd disk caddy.
I mean, it cannot be recognized at all even in BIOS. I am thinking to install new BIOS system , but when searching for it , I don't find anything and I don't want to flash wrong BIOS update.
[URL]] ....
It is exactly this model , I have entered the serial number I got from Ace's system information software. Any way to recognize the 2nd disk caddy along with the SSD?
I have a new E1-572G laptop. Long story short, I installed Win 7 on it, and after that, Ubuntu 14.10. I had issues with bootloader, but after fiddling around with legacy/UEFI booting, secure boot, and things like that, I almost successfully configured the laptop. When I selected the ubuntu uefi bootmgr in the bios, in secure boot mode, I rebooted the laptop for what I thought the last time, but then it did not go past the Acer logo. Only combination that works is ctrl+alt+delete. If I remove the hdd, then the acer logo flashes for half a second, and a black screen appears, with a static console cursor at the left upper corner.
I searched a lot in the topic, wanted to reset the bios, but there is no jumper for this, nor can I remove the bios battery. I wanted to reflash the bios, but I could not find proper instructions on this.
Just got this Laptop, popped battery in, plugged it in. I turn it on, keyboard backlight comes on, the fans spin up, nothing comes on the screen. Nothing is coming out of the HDMI port, really frustrated at this point as this is the second Acer laptop I bought that had issues (granted first one was used so I gave Acer a pass).
Anything I can do to fix this or is it just dead and send it back?
I have a brand new Acer Aspire E1-572G. It has 1TB HDD and with no partitions. So I want to create partitions as I wish, but before that, I would like to know if the recovery option will work if I alter the default HDD structure. Before I have failed with restoring after creating partitions with some other brands.
View 3 Replies View RelatedI put a new Windows 8 on my pc due too my old HDD dying --' and my recovery partition was corrupted so i had to clone the c:/ drive of a friend of mine with a similar laptop on my new sshd.
Until now everything was working fine some double drivers but they posed no problems but i have 1 problem with my 1 usb 3.0 port, it won't recognise anything, when i put in my external hdd it fires up so i know the port is giving power but it doens't recognise the drive, same goes for my usb wireless mouse and usb drive.
I know its not the drives or mouse themselves because when i put them in one of my usb 2.0 ports they function without problem.
I have already tried uninstalling the drivers, restarting the computer, took out the battery for several minutes and so on.
I also remarked that in the devices and printers there is a device called unknown USB device (port reset failed)...
I had problem with my E5-572G-77BU with windows 7 installation. But now I cannot find any Win 7 drivers for my PC.
View 6 Replies View RelatedI needed to use Windows resore. after restart, the acer logo dont show and laptop stay in black screen and HDD LED blink in aqual time slice. Then after a few minutes acer logo shown and Windows starts.
This, happend few times but now acer logo dont show and it stay in black screen .
My laptop has just started doing the same thing, at least every 5 minutes it drops the net connection.
View 2 Replies View RelatedI had my notebook evaluated by a local technician who told me the trouble I was experiencing was due to the DVD disc not recognizing and communicating with the computer. Upon further investigation she determined that the drive did read and play audio just fine. Video and graphics (pictures) would not play on the drive. Her conclusion was that the drive had a defect of some sort related to the DVD function only.
I have two questions.
1. Could it be that the ROM is corrupt and can that be replaced?
2. IF I have to replace the drive can I do that myself or do I have to have a professional do it??
I've a new P276M laptop running Windows 8.1. I can't get it read USB flash storage devices.
The USB ports seem to be working - wireless mouse OK. Also it works fine with an external Seagate hard drive.
I've tried a number of different flash keys - encrypted and non-encrypted. The system 'sees' the device but all I can get in Device Manager is an icon with yellow exclamation mark.
Question: How can I back up my Acer Aspire one 532h-2630 to an external hard drive or to another computer? It has Windows 7 starter which does not seem to allow me to do it.
My brother gave me his old external hard drive, it's a Maxtor Shared Storage Drive capacity is 300GB.
I love my Acer but want to back it up and restore it to factory settings. I've been using it for over 2 years so it's full of stuff by now and I'd like to start fresh.