With my PC I can record streamed audio via Audacity. However I can only see the microphone as an input source for I/O inputs. I have looked at all settings and cannot find anything relevant. It seems you cannot also run the Realtek control panel presumably this is a Acer configuration.
View 5 RepliesI have an ACER Aspire 9413 (9410 Series) laptop..
After a little problems i decided to format everything and reinstall Windows XP Service Pack 2.
Oke Everything went fine untill now:
When i install my driver the Realtek High-Definition Audio from official website of Acer. The install does everything fine, after reboot: No Sound...
In the hardware stuff i can't find anything of the installed driver (realtek). I know its This driver i need, because i had it working a while ago before i formatted my laptop...
I have a new Aspire 8935G with Realtek audio (AL889, if I read it well) and I'm not able to use digital output.
I tried using a common stereo jack to RCA cable, using just the left (black) RCA to plug into the digital COAX input of my ampilfier, but nothing came from the speakers.
Do you know how to setup the digital output of the Aspire?
I have a problem with my laptop and it's spdif optic output. I want to connect it to my hi-fi but I am having trouble with enabling digital output. I just don't know how to do it
In my Realtek Mixer there are options only for analog outputs - no digital options at all. I use now the newest drivers, 1.70 or 1.77 - nothing. I've tried older versions, something like 1.30 and then spdif flashed red colour and I thought that it will be OK, but nope. Still no sound and no digital options in Realtek's mixer. On these new drivers (1.7x) it doesen't ever light up.
Someone here said that one cannot acutally see the LED inside blinking, well... I can see it As I told before on older drivers it's "on" all the time - althou no sound.
In the other topics I've read that one has to change default output to digital output - I see no such option, if I am just blind and retarded then someone posting a screenshot would be nice
I have a N411z with a Conexant audio card. I have upgraded to 8.54.45.0, A04. Can I get this card to recognize a audio in source via a USB port?
View 1 Replies View RelatedI have a Stream 11 with Windows 8.1 I can't find the Realtek equalizer in the Control Panel. Where is it?
View 8 Replies View RelatedI can't get the audio input jack to work using either an MP3 or a microphone. This is a new Inspirion and when I call Dell, they send me overseas to someone that
keeps telling me it's a problem with the three MP3's I have tried and the microphone so they send me to "Pro Support"
that wants a credit card number. Anybody have an idea if this is a software issue or a defective input jack?
I have a really annoying problem with sound quality. When i install the realtek hd audio driver, the sound starts to be noisy. I hear it when no sound is on output, or moving my mouse, HDD activity, etc. I used the sound card with win7 driver (no realtek), and it was really good, but the mic was just awful. 2 years ago i found an old version of realtek driver, which was good, but i dont remember the version number.
View 3 Replies View RelatedI just updated the Realtek Audio Driver this morning when I saw the update available in the Update center. The driver went from v 6.0.1.6914 to v 6.0.1.7040. Now, the Dolby Advanced Audio v2 won't work. It forgot my previous EQ settings and when I make a new one, it doesn't change a thing in the sound. Is there a way to roll back to the previous version?
This is really bad as I'm listening to lots of music on this laptop while I'm working and without the Dolby EQ, the sounds is not very good...
I'm under Windows 8.1 64-bit.
I'm using HP Pavillion dv6 1330-er. The problem is - both my mic and webcam mic were working fine untill yesterday's morning. The evening before i was talking with my friend on skype and then gone to sleep. When i woke up - both mic input and webcam mic weren't working. I am using Windows 7 Ultimate x64 ... Nothing like this happened before.
Webcam video itself working fine. Headphones working fine.Tried to reinstall driver - didnt work. Laptop was resting on the table, just like i left it in the evening. Have 2 different windows installed on my laptop (the another one is windows XP, not a single program installed, just drivers) - mics aren't working.
The same mic on different PC working fine.The system detects both headphones mic and webcam mic and the system shows when i'm taking headphones' mic in and out.
if these will run on the machines mentioned?
View 10 Replies View RelatedThe microphone is "active" all the time, touching the area around it and you can hear it through the speakers. Opening the Realtek device manager and the Mic is ticked in the top row of three "Speakers (ticked) Digital out (unticked) and Mic (Ticked). How do you turn it off ?
View 5 Replies View RelatedI've just done a clean install of Windows 7 64bit and installed the latest Realtek HD driver (2.42) from their site, selected 5.1 in the sound properties through Windows and Audio Manager but when I playback media the sound is still tinny and only 2.0.
I haven't installed anything else and let Windows find the other drivers for my 9600M GS etc
This is the second time I've installed the OS as facing the same problem before and thought it might have been a corrupt installation or something.
if there's any new realtek drivers for the 6920g, Ive done multiple search's myself and came up with nothing
I ask because whilest playing games or just listening to music every so often (well pritty regulary actualy) the sound just becomes verry distorted and unplayable untill I restart the app/game. I have tryed to install the latest official realtek driver 2.06 (not acer's version), I now know this was'nt the smartest of moves on my part as the sound then became verry tinny witch i now know was because the normal realtek driver's dont account for the ''tuba'' in acers.
when i turn on my laptop this error appears when i log on to windows. it appears to be having a conflict with acer eAudio Manager as when i switch to another plan(like,games,or music>rock or smtn from the list) it doesn't change anything.and that error appears again.the sound was way better before,and i even had that 5.1 output,which i miss...
View 5 Replies View RelatedIt worked yesterday but as of this morning no sound. The Realtek highDef sound device has the current driver and is identified as operational by the Win 8.1 device manager, but no sound comes out from any source. Rolling back the driver to an earlier version did result in a pulse of static during the changeover but still no output.
As side note the Devices and Printers button is no longer working in Classic Shell.
I have a Acer 6935G which I have recently installed Windows 7 on (x64). Windows found most of the drivers, audio included. I then downloaded the Windows Vista version of Launch Manager (version 2.0.0.2), and installed - and yes, everything worked great.
That is, until I found I had an issue with my microphone in Skype. I had ALOT of audio noise coming through when using the mic... I realised this was because the gain was up too high, however to reduce the microphone gain (or boost), it was impossible with the stock Windows 7 drivers.
So? I went to Realtek's website and downloaded the newest Realtek HD Audio driver - for Windows 7. I installed this, and then low and behold, in the Audio manager, I found that the mic boost was set to +20db! I removed this boost, and my audio issues were fix! Horray... Or at least, so I thought.
Upon doing this, I realised that the new Realtek audio drivers had some how stopped Launch Manager from working correctly. The "e", web and e-mail buttons all work fine, however the touch screen audio slider, mute button, etc. do not register when I press them.
Even before installing Launch Manager, on a fresh install, the mute button would work!
So this led me to go down the route that Launch Manager, and specifically the "Cinedash" part (volume controls etc) were trying to control the wrong audio device. In my audio devices, I have two "playback devices" listed, Speakers (on Realtek High Definition Audio) and Realtek Digital Output (also on Realtek High Definition Audio).
I went ahead and disabled the latter (Realtek Digital Output), but no, nothing... the controls on the cinedash still didn't do anything!
So, i decided I'd uninstall the Realtek drivers i'd just installed. After doing that? Nothing! The cinedash audio controls STILL don't control my audio!.......
i have an Acer Aspire 5520-5912 laptop. It has a AMD Turion 64 X2 Dual-Core Proccessor Running at 1.9 ghz. if Anyone Knows, please tell me, What is the PLL For this chipset? I want to overclock the proccesor to about 2.0 or even 2.1, no higher so i dont burn the chipset. Also if anyone else has any advice for Aspire 5520 Laptop's please tell me.
id like to know what do you think the estimated FPS for Counterstrike Source would be on this laptop.
Dual-Core 1.9Ghz AMD Turion 64
Nvidia Geforce 7000M GO
2 Gb Ram DDR2 667
160 GB Hard-Drive
i have a Acer Aspire 8920G and on the side there is an port with the name "HDMI" . If i plug a HDMI cable in from my Ps3 would my screen work as monitor ? so is the HDMI an input or (and) output
View 5 Replies View RelatedI have a Counter Strike Source CDs sitting here on my shelf and I would like to play it on my 'future' Macbook.
Is there anyway to install it on Mac OS X and play the game... or would I have to install Windows XP in BootCamp in order to play CS: Source?
What audio plug (#1 or #2 in the picture) does my Aspire One A0725 laptop need to feed stereo audio out and mono audio in (or is it also stereo in). See the picture at the following Dropbox link [URL] ....
View 8 Replies View RelatedMy Mat$hita UJ-832D DVD burner has given out, and I wanted to purchase a replacement, but am having a hard time finding one online for my Sony Vaio TX750p/b notebook. Does anyone out there know of a good source that carries a replacement burner (any brand) that will fit my notebook?
View 10 Replies View RelatedI have a dv7-1025nr, I used to run XP SP3 on it and it worked great, but I have to pass the laptop on to my brother and I am getting a dv7-2000. So I had to reinstall Vista, tried x64, everything works except Realtek LAN. It is only detected in Safe Mode, in Normal Mode or even in Safe Mode with Networking, the LEDs for activity stop lighting up during Vista loading.
I tried Vista x86, same problem. I tried XP SP3 again, LAN is there, no problems at all.
I tried Vista x64 again, Safe Mode, LAN works perfect, I can even browse the net.
What the heck is going on ? I tried all possible driver combinations, unless in Safe Mode, all drivers say the hardware is not even present.
i'm pretty close to buying the 17" mbp, but i was hoping to clear somethings up beforehand. now, i know nothing about computers, so don't ask me stuff that i wouldn't know. how would the mpb cope with running counterstrike source, for say a couple of hours everynight.? i play on low settings and @ 1024x768 res. - read a little bit about bootcamping but that means nothing to me. and about heating, i have read that the mbp overheats/gets hot quite easliy, so would it be worth getting a stand/cooling to help?
View 7 Replies View RelatedI can't find cards anywhere, used or new! My GTX in one 9400 bit the dust this morning and my GS bit the dust 2 weeks ago (I have a few 9400's). I need to get some replacement cards but can't find them anywhere and woul
View 4 Replies View RelatedIt sounds like there are some dodgy sellers for the Dell power supplies, at least on ebay, based on some discussions. If anyone has purchased a 130W PS and feels like they could recommended the seller I'd appreciate the tip. If posting an ebay or retail link violates forum rules then just PM me.
View 15 Replies View RelatedI have this problem since last night and there had no problem from I bought my computer last year until last night.
I leave my pc there and I went out somewhere. When I get back, I saw my screen blank, and no responding at all. I force shutdown and restart again, the bios screen didn't show up.
But after a while I turn on my pc, I can see the bios screen again and log on to windows. After that I go to event viewer and check what is that error just now, and the error message is:
"The description for Event ID 14 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer."
And then I didn't bother that and start to play game. But suddenly my screen went to look like low graphic, many pink pixed, and then went to blank screen. I force to turn off the pc and then turn on again.
I searched all over the internet and they asked to uninstall the driver and reinstall again. But still have this kind of problem, even I surfing internet the problem still occurs.
I get random crashes and the apparent crashes I get all relate to this error message:
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (rtlh86.sys, rtlh64.sys)
This problem was caused by a missing driver for Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (rtlh86.sys, rtlh64.sys), which was created by Realtek Semiconductor Corp.
According to the spec sheet for my laptop and Hp's website this is what I have on my laptop: Realtek RTL8101 Family PCI-E Fast Ethernet NIC rather than the 8168.
Could this conflicting information be the source of the problem? How come Windows shows a different NIC to the HP website? I've tried to download the driver off the Realtek website but I find the website frustratingly annoying and basically pants (for such a global player)!
Link
Quote:
Grand Central Dispatch may not exactly be a household name to the average Apple user, but it's certainly a hot topic among developers, who may know it better as "libdispatch," and are no doubt thrilled that Apple has now made the whole thing open source. Among other things, that means developers are now able to take full advantage of multi-core processors in Snow Leopard, which obviously has some fairly big implications for applications as soon as those developers are able to get a handle on things. Know what you're doing? Just like to get in over your head? Then you can find the complete source code and other necessary information at the read link below.
More specifically, I am trying to convert flv to mp3, but I of course want as many conversion options as possible.
View 4 Replies View Related