Acer :: Aspire 5610 4537 Memory Upgrade
May 7, 2009
I have been looking into upgrading my Acer aspire 5610-4537 laptop every single place I looked said something different I finally decided I would trust the website www.crucial.com and there crucial system scanner tool which worked perfect and was correct even thought everyone else said it was wrong. My CPU had 2 caches for 2x512mb to make a 1gig of ram which is no where near enough for this laptop to be running windows vista or even thinking of running multiple programs. So after I ran the crucial scanner tool it told me what ram I had currently and how much I could add to my system it picked 2 GB 200pin ddr2 sodimm 256x64 pc2-5300 dual die so I ordered two of them to bring my system to 4gigs. I was a little worried because I do only have a 32bit operating system but all I had to was unplug the old chips and insert the new ones and press power and that was it no updates no changing bios or operating system so I would highly recommend using this web site.
Processor
Genuine Intel(R) CPU T2250 @ 1.73GHz
Memory (RAM)
4.00 GB
Graphics
Mobile Intel(R) 945 Express Chipset Family
Gaming graphics
256 MB Total available graphics memory
Primary hard disk
21GB Free (53GB Total)
Windows Vista (TM) Home Premium
System............................
View 4 Replies
ADVERTISEMENT
Oct 15, 2008
Considering an Aspire One right now because it is less expensive than the others. I have a 512MB RAM (DDR2-PC5300) and 80GB 2.5" SATA HDD from my Thinkpad (which I upgraded both). So, I think maybe I could buy the Aspire One the cheapest version (8GB I guess).
So, is it can be done? I know that there is SATA version of the Aspire One but not sure the connector will be there in the SSD version. Try to google it but found only SSD upgrade....
View 6 Replies
View Related
Oct 1, 2007
My brother just bought an Acer Aspire 3680.He purchased 1 gig of DDR2 Memory from Crucial. When we get to the desktop the screen is fine at first then the screen goes off and back on with 8 bit display. 512 DDR2 came in the machine. Crucial site said he could mix memory sizes. I tried it with the 1 gig stick by itself in case the mixed memory was the problem. Same thing..I've tried 2 sticks of 512...same thing. I've tried 2 sticks of 1 gig each..same problem. This laptop won't allow any upgrade at all. Will only run correctly with (1) 512 stick. I've never seen this problem before. I've installed many memory sticks in computers. This is a first for me. What could be causing this?? Any advice would be appreciated. BTW. the computer shows the upgrade amount of memory but the display color keeps changing to 8 Bit! I change it back to 32 and it reverts back after a few moments to 8 Bit. I went to Acer and installed an updated driver for the Intel Graphics card thinking the driver would help. I haven't installed a bios update yet. Called Acer and they said to return it for repair.
View 4 Replies
View Related
Dec 13, 2014
I have an aspire 5251-1513 with win7 home premium 64bit OS. It came with 2 gig and I'm trying to add a 4 gig memory stick. Win 7 recognizes it now has 5 gig, but won't use the 4 gig. I've tried find a place in bios to make a memory change but can't locate any place to do that. I've tried use the new 4GB stick by its sleep but the laptop won't boot up then. How to get win7 to use this memory?
View 5 Replies
View Related
Jan 18, 2009
I just updated my Acer Aspire 5735 notebook from 3gb DDR2 to 4gb DDR2. The bios now detects 4gb total as does Vista's System Page (Control Panel/System in Ultimate 64bit)
However when i go to task manager/performance my total physical memory shows up as 3000MB and the Physical Memory Usage graph seems to reflect this 3gb total.
Is there something I need to do to get vista to detect and utilise the 4gb total?
View 10 Replies
View Related
Apr 15, 2008
In the specs of my Acer Aspire 5610, it says it will accept up to 4Gb RAM, yet a friend has just told me that it will only recognise up 2Gb of RAM? Is this correct? As I can't see how Acer can say it will take 4Gb of RAM if it will only accept up to 2Gb? Also, I have another slot on the motherboard and the same friend tells me its a mini PCI slot but I don't know what the hell they are? I am geting so confused here listening to people with one person saying one thing and the specs saying something totally different! Also, I have 2Gb of 533 RAM at the moment but I have been told that it will also take PC2 4200?
View 9 Replies
View Related
Apr 12, 2008
I just got one of these from eBay.co.uk. What can I say? OK, its not your all whistles and bells, top of the range gaming machine that some people just have to have but it does exactly what I want it to do and a lot, lot more!
Apparently, it is dual channel memory but it doesn't actually tell you what memory it will take or what memory speeds it will take as the destruction manual isn't very helpful at all (typical Acer)? I know it will hold up tp 4Gb of RAM and it has 1 x 1Gb 533/667 (I think that's what it is) in at the moment but I would like to upgrade to faster memory if possible? Could anybody assist and let me know exactly what the specs for the memory are please?
View 7 Replies
View Related
Feb 15, 2010
Have windows 7 installed for past 5 months just recently only when playing poker on facebook the computer will shut down on its own, could this be a Ram isuue, I tried restoring the computer to 2 weeks prior to the issue,
View 5 Replies
View Related
Feb 25, 2008
I'm having 3 problems with my notebook:
1. The silver directional square in between the two buttons on my touchpad dont scroll anymore, now they just act like the left click button. i used to be able to push the downward part and it would bring the page down.
2. my media buttons on the right side of the keyboard do not work at all. (the volume, play, fb, ff)
3. My windows side bar is activated, but doesnt show up...
View 4 Replies
View Related
Oct 27, 2008
My Acer Aspire 5610 constantly overheats and shuts off. The fans arent clogged or anything and there's nothing that I can see that would prevent them from cooling the chips.My battery goes low quite fast even though I have it set to power saver.Buttons on my keyboard don't work very well, I can't use the mouse/touchpad or scroll buttons to scroll. And now when it performs POST, it has a lot of short beeps...like beep beep beep beep beep beep beep beep...no break or pause between the beeps.And it keeps going, it doesnt allow me to turn the computer off by pressing the button either, I have to take the battery completely out. The only way to pass the POST and beeping, I have to press F2 as if I wanted to go to setup, then it loads up correctly.
View 4 Replies
View Related
Apr 20, 2009
I have an Aser Aspire 5610 - 2328. The model is 5610z. I have the same issue with my webcam and it is orbicam with logitech software. I also here the unplugging sound and also get BSOD's. My laptop is under warranty and it has been sent in to be checked. They could not find any issues also when I click the orbicam icon first try it shows it disconnected. I try again it works. They still claim its working and nothing they can do they have also seen what it doese when clicking on the icon and still claim its working.
Not sure if they really checked the connections I will look into it. It is under warranty thru Wal-Mart and was sent to a place called Cyber Test in Longwood Florida.
View 10 Replies
View Related
Aug 16, 2009
I am trying to perform a factory reset for a Acer laptop but I cannot find an option that I am looking for.
I hit ALT + F10 at bootup and I get to the eRecovery Management screen.
From here, I get two choices:
1. Restore system to factory default.
2. Restore system from CD/DVD
As, I do not have any DVDs, I choose option 1. After that, the recovery process continues without any more prompts and restores the laptop to its default settings.
Here is the problem but. The laptop has a 120GB Had drive which after factory reset is split into 2 partitions of 55GB each with the remaining 10GB for the hidden recovery partition. Thus there is 3 partitions in total.
As it is Vista Premium, C: is already 50% full straight after the factory reset.
Is there any way I can perform the reset and have an option to just have one C drive of 110GB? I did not see any such option when performing the reset by using ALT + F10. There doesn't seem to be an option for this when performing the reset from within Windows itself.
I was thinking maybe deleting the D partiton before performing the reset may help but I am not 100 percent sure as I am not sure if the factory image contains 1 or 2 partitions.
View 4 Replies
View Related
Apr 7, 2009
Have a AS5610 and recently it is dog slow on bootup (8 Mins until the computer is usable). Have removed hard drive and scanned it with several malware scanners, tested the hard drive for physical problems as well as running memtest on the memory. None showed any problems.
Have run msconfig and disabled everything and that allowed a usual computer after 4 mins.
I ran a shareware util called BootLog XP and it appears to indicate that LVPRICINJ.DLL is running for 509 secs of a normal bootup. This is the logitech video camera driver. I was thinking of uninstalling the Orbitcam software and drivers but can not find the current drivers on the Acer (N America) site.
View 5 Replies
View Related
Feb 11, 2009
I have an Acer Aspire 5610-4179 laptop which was recently shipped back to me from the factory. I had been experiencing several problems, all of which were detailed and only some of which were fixed. I love having it back so much, though, that I am reluctant to send it away again. Some of the problems I am running into deal with the Orbicam camera and the touchpad. I have tried updating the drivers for these, but that doesn't seem to solve the problem. The camera still says that it is not plugged into a working USB port even though it's an internal camera; the touchpad works for moving the mouse, but tapping on the touchpad does not act as a mouse-click anymore. In addition, the volume and DVD control buttons on the right side of the keyboard no longer work.
View 4 Replies
View Related
May 8, 2008
what is the highest capacity HDD I could use in the Aspire 5610 Series please? At the moment, I have a 160gb SATA HDD but would like to upgrade to a higher capacity if at all possible?
View 5 Replies
View Related
Oct 28, 2008
i currently have a TM 5720 with 2GB of ram. I was thinking of upgrading it to 3GB. I was wondering if you think it will make much of a difference and whether any of these would be suitable (already done a small bit of research)
i cant post any links but had seen a few on play.com
2gb pc 5300 200 pin
would it matter that there would be 2 different types of RAM in the laptop.
View 5 Replies
View Related
Jan 28, 2010
I found out from the release notes for BIOS 3.60 that one of the changes is to "update kernel code for 4GB memory support". Does it mean that if I update my BIOS from v 3.33(dated 9/1/07) to v 3.60 I will be able to increase my current maximum memory of 2GB to 4GB in Acer Aspire5610z.
View 5 Replies
View Related
Sep 4, 2007
I have Aspire2000 and am trying to upgrade RAM to 1GB.
I already bought 2x512mb sticks and I CANNOT find second ram slot.
I managed to find the first one which is located on the bottom of laptop.
Where is the second slot? If it is under the keyboard or you have to dissect whole computer, how do you get to that area?
View 6 Replies
View Related
Jun 22, 2009
I've just completed a CPU upgrade on my 5315 (to a T7300, which took 15 minutes!). I'm now thinking of upgrading the memory from my current 2GB @ 667 MHz (with the new CPU the memory runs at 667 MHz rather than 533 MHz with the old CPU) to 2GB @ 800 MHz.
However, I've read that the performance increase between 667 MHz and 800 MHz is very little, thus, it's not worth spending the money, even if it is only $AUD40.
Can anyone provide any input, benchmarks or experiences?
View 10 Replies
View Related
Apr 7, 2010
I have a 5810TZ that I have upgraded to Win 7 64-bit. I have tried to upgrade to 8GB ram and Windows hangs. CMOS reads it as 8GB, but I cannot get Windows 7 to boot.
I have installed two 10600 DDR3 chips. If I remove one chip, it boots normally. It doesn't matter which slot I use or which chip I use. But when I put both chips in, Win 7 hangs.
View 7 Replies
View Related
Jan 12, 2015
I just purchased a used Elitebook 8540w with i7 quad core and four memory slots (I love it!). It is running 64 bit Windows 7 Professional It came with one 4gb memory module and I purchased an additional 4gb module to bring total RAM to 8gb.
I have the HP document that shows for two 4gb memory modules, one should be in memory slot 1 and the other in memory slot 3 for correct functioning of dual channel memory. All set right?
Not quite. In the Elitebook 8540w, the primary memory slots under the keyboard are clearly labeled "1" and "2" However, the expansion memory slots on the underside of the chassis are also clearly labeled "1" and "2" Opps! There is no "3" and there is no "4" In which of the unfilled three slots do I install the second 4gb module for correct functioning of dual channel memory?
View 3 Replies
View Related
Apr 7, 2009
Have just rebuilt an Acer Travelmate 2200,loaded XP Professional on it, but when I try to upgrade the memory from the standard chip it doesnt like it!
If I add an extra 1Gb chip into the spare slot under fan casing it comes up on start up as file missing system32drivers tfs.sys. If I remove the original chip and replace with one 1Gb card only it fires up ok, but again when you try to add the second 1Gb card the same error message, file missing system32drivers tfs,sys comes up.I have looked at a PDF of the instruction manual and follwed to the letter as far as ram upgrade but at this juncture am now completely at a loss as to what to do next.The 2200 will support 2Gb ram so why cant I load it?
View 10 Replies
View Related
Jan 29, 2009
I have an Acer 5003WLMi and I would like to add 1GB of memory. I did a crucial scan and they recommended some memory, specifically the DDR-PC2700 1GB CT478616. Now, I was ready to buy it, but on Amazon I did a search for DDR-PC2700 memory and found another 1GB DDR-PC2700, this time with part number CT12864X335. Given the sensitivity here, I would like reassurance, so is there any difference in these two parts and is it okay to buy the memory from Amazon, or should I just buy the one Crucial recommended?
Here are the links for each memory from Crucial.
View 10 Replies
View Related
Oct 16, 2014
I have an AO722-0825. I'm looking to increase the speed and performance of this machine, and so I wanted to upgrade the memory (and possibly swap in a SSD). So my questions are:
1) Is it possible to upgrade the memory on this machine?
2) What brand of memory does Acer?
3) taking out the hard drive and putting in a solid state drive?
View 3 Replies
View Related
Oct 21, 2008
One of the things that truly bugged me about this laptop was that it only shipped with 533MHz RAM (PC2-4200) when the hardware supported 667MHz (PC2-5300). When I started looking to upgrade I was bugged again that the 667MHz memory I was finding had a CAS Latency of 5 where the 533MHz ran at CL4. Then I finally located some 667MHz CL4 memory and decided to pull the trigger.
I am happy with the purchase and would recommend the upgrade to anyone with this laptop. I can't say if I used the best memory benchmarking program, but at the very least I can publish my results using SiSoftware Sandra Lite:
1) Memory Bandwidth test (HIGHER is better)
2) Memory Latency test (LOWER is better for both)
3) Cache & Memory test (HIGHER is better for Combined, LOWER is better for Speed factor)
PC4200 CL4 2x1GB (Original memory)
1) Memory bandwidth 3524 MB/s
2) Memory latency 138 ns, Speed factor 66.0
3) Cache & memory Combined index 9375 MB/s, Speed factor 14.2
PC5300 CL5 2x1GB (borrowed from a friend during the upgrade for reference)
1) Memory bandwidth 3588 MB/s
2) Memory latency 122 ns, Speed factor 63.7
3) Cache & memory Combined index 9645 MB/s, Speed factor 13.3
PC5300 CL4 2x1GB
1) Memory Bandwidth: 3663 MB/s
2) Memory Latency: 114 ns, Speed factor 55.2
3) Cache & Memory: Combined index 9910 MB/s, Speed factor 12.6.......
View 5 Replies
View Related
Dec 31, 2009
I have an Acer 5610-4610 system. It was repartitioned to one XP drive for several years. I am finally wanting to put the PQ service partition back on it but none of the folders of the restore CD's have any of the files needed to recreate this partition. I am wanting to put the factory (VISTA Home Premium) system on C. With all the system files and folders from the 3 restore CD's into the PQSERVICE partition. I have no clue how to proceed.
I do remember there was an acer(C) partition and a data (D) partition when I got it. The PQSERVICE partition was there back then.
The first (System) CD has none of the files mbrwrdos.exe or rtmbr.bin
used to create the PQSERVICE system.
I run the ACER Disk Formatter and it cannot find any drives on the laptop.
Weird! From what I've been able to glean my thought was that that the Formatter disk would facilitate creating the correct partitions?
View 7 Replies
View Related
Apr 22, 2009
I just bought 2x2gb ram from my Acer Extensa 5610 and my Windows 7 x64 can see it right, but only use 3gb. Resource monitor says the other 1gb is Hardware reserved. In the Bios theres an info saying extended memory 3gb. Is that what the problem is? coz its not something I can set in this version of bios.
Do i have to upgrade my bios? if so, to what version? The manual clearly says i can upgrade to 4gb. (extensa 5610 has intel 945 chipset)
View 10 Replies
View Related
Apr 19, 2008
How I put the bluetooth back on my 5610? When I first got the laptop, bluetooth was enabled (I think) as there was a blue LED lit on the front of the machine by the sliding bluetooth control button. I have since had to reformat as I loaded some drivers for a Compro TV stick that was 'supposed' to be Vista compatible. Needless to say, it screwed everything up so I ended up just reformatting and reloading everything. I have been to the Acer FTP site as Acer themselves told me to do and clicked on the Vista link and downloaded the Bluetooth program and loaded it but nothing happens? No blue LED or nowt.
View 4 Replies
View Related
May 14, 2009
I want to stop using my wireless connection on my laptop and plug an ethernet lead in.
But when I plug this lead in my laptop just stays connected to to my wireless network. I tried disabling the Wireless on my computer then putting the lead in but still it wont attempt to connect to the internet with the ethernet lead in. What driver do I need to download so it will recognize the lead is in the laptop and attempt to connect to the internet?
I have an ACER 5610/Z
View 10 Replies
View Related
Mar 30, 2009
I am working on my brothers laptop.
Its an Acer 5610 that came with Vista.
He had a broken screen and a virus. I repaired his screen and he then took it to a "buddy" who partitioned the HD to save the pictures ect on it and put XP on the other partition.
My brother was updating drivers when he rebooted it and it just wouldn't restart.
This is a description of the problem:
"I hit the power button , lights come on (no HD light though). and the Fan spins for about 30 seconds and stops. After about 1 minute the fan starts back up and stays on.
Power light , battery charger light stay on but nothing happens."
I pulled the covers off the back and everything seems seated and where it belongs.
Recovery disks have been ordered (before I knew the full extent of the problem) and will be here in a week or so but I don't think they will do any good on a system that wont boot.
I have repaired a few desktops but this is my 1st laptop repair.
View 15 Replies
View Related
