I have an Acer Aspire 5610-4179 laptop which was recently shipped back to me from the factory. I had been experiencing several problems, all of which were detailed and only some of which were fixed. I love having it back so much, though, that I am reluctant to send it away again. Some of the problems I am running into deal with the Orbicam camera and the touchpad. I have tried updating the drivers for these, but that doesn't seem to solve the problem. The camera still says that it is not plugged into a working USB port even though it's an internal camera; the touchpad works for moving the mouse, but tapping on the touchpad does not act as a mouse-click anymore. In addition, the volume and DVD control buttons on the right side of the keyboard no longer work.
Have a AS5610 and recently it is dog slow on bootup (8 Mins until the computer is usable). Have removed hard drive and scanned it with several malware scanners, tested the hard drive for physical problems as well as running memtest on the memory. None showed any problems.
Have run msconfig and disabled everything and that allowed a usual computer after 4 mins.
I ran a shareware util called BootLog XP and it appears to indicate that LVPRICINJ.DLL is running for 509 secs of a normal bootup. This is the logitech video camera driver. I was thinking of uninstalling the Orbitcam software and drivers but can not find the current drivers on the Acer (N America) site.
My orbicam is functioning properly but when I close my laptop lid, my computer makes a sound and when I open the lid, my computer says that new hardware was found. This "hardware" is recognized by my computer as "Acer Orbicam #2" which means for some reason, my laptop thinks that a new camera is installed or plugged in everytime I close and open my lid.
Also, it searches for a usb driver that it says the camera can connect to to go faster. But there is no actual camera, it is just recognizing my orbicam twice for some reason. This causes a problem since after awhile, when I close and open my lid, my computer goes blue screen and restarts on me.
I formatted my laptop and then realized that I had lost my backup disc. So i ended up installing a copy of XP Pro.
I've been able to obtain most of the drivers needed on the acer site. However, I am unable to get my USB2.0 working, and I also have issues getting the built-in webcam working as well.
I'm running an Acer Aspire 5672 WLMI. Recently i upgraded my RAM and hard drive, obviously having to reinstall the OS and driver's etc. Since i made the change, i haven't been able to get the Orbicam or usb ports on the left side of my computer to work.
Luckily there are still 2 ports on the right side that work fine, and the entire rest of the computer is great, but i'd like these things to work (especially the camera). I've re-installed everything 3 times at this point with no luck. The drivers are installed and in programs the camera is listed as an optional webcam. The first time i reformatted i got and error message that said camera is currently in use and cannot be accessed. It would ding on and off repeatedly until i rebooted the computer. Currently what the camera does is basically nothing. It's detected, but when pulled up in a program (such as gmail or acer software) it's simply black. I am wondering if i maybe jostled something inside and it's disconnected or if this is a software issue.
In the specs of my Acer Aspire 5610, it says it will accept up to 4Gb RAM, yet a friend has just told me that it will only recognise up 2Gb of RAM? Is this correct? As I can't see how Acer can say it will take 4Gb of RAM if it will only accept up to 2Gb? Also, I have another slot on the motherboard and the same friend tells me its a mini PCI slot but I don't know what the hell they are? I am geting so confused here listening to people with one person saying one thing and the specs saying something totally different! Also, I have 2Gb of 533 RAM at the moment but I have been told that it will also take PC2 4200?
I just got one of these from eBay.co.uk. What can I say? OK, its not your all whistles and bells, top of the range gaming machine that some people just have to have but it does exactly what I want it to do and a lot, lot more!
Apparently, it is dual channel memory but it doesn't actually tell you what memory it will take or what memory speeds it will take as the destruction manual isn't very helpful at all (typical Acer)? I know it will hold up tp 4Gb of RAM and it has 1 x 1Gb 533/667 (I think that's what it is) in at the moment but I would like to upgrade to faster memory if possible? Could anybody assist and let me know exactly what the specs for the memory are please?
Have windows 7 installed for past 5 months just recently only when playing poker on facebook the computer will shut down on its own, could this be a Ram isuue, I tried restoring the computer to 2 weeks prior to the issue,
1. The silver directional square in between the two buttons on my touchpad dont scroll anymore, now they just act like the left click button. i used to be able to push the downward part and it would bring the page down.
2. my media buttons on the right side of the keyboard do not work at all. (the volume, play, fb, ff)
3. My windows side bar is activated, but doesnt show up...
My Acer Aspire 5610 constantly overheats and shuts off. The fans arent clogged or anything and there's nothing that I can see that would prevent them from cooling the chips.My battery goes low quite fast even though I have it set to power saver.Buttons on my keyboard don't work very well, I can't use the mouse/touchpad or scroll buttons to scroll. And now when it performs POST, it has a lot of short beeps...like beep beep beep beep beep beep beep beep...no break or pause between the beeps.And it keeps going, it doesnt allow me to turn the computer off by pressing the button either, I have to take the battery completely out. The only way to pass the POST and beeping, I have to press F2 as if I wanted to go to setup, then it loads up correctly.
I have an Aser Aspire 5610 - 2328. The model is 5610z. I have the same issue with my webcam and it is orbicam with logitech software. I also here the unplugging sound and also get BSOD's. My laptop is under warranty and it has been sent in to be checked. They could not find any issues also when I click the orbicam icon first try it shows it disconnected. I try again it works. They still claim its working and nothing they can do they have also seen what it doese when clicking on the icon and still claim its working.
Not sure if they really checked the connections I will look into it. It is under warranty thru Wal-Mart and was sent to a place called Cyber Test in Longwood Florida.
I am trying to perform a factory reset for a Acer laptop but I cannot find an option that I am looking for.
I hit ALT + F10 at bootup and I get to the eRecovery Management screen.
From here, I get two choices:
1. Restore system to factory default. 2. Restore system from CD/DVD
As, I do not have any DVDs, I choose option 1. After that, the recovery process continues without any more prompts and restores the laptop to its default settings.
Here is the problem but. The laptop has a 120GB Had drive which after factory reset is split into 2 partitions of 55GB each with the remaining 10GB for the hidden recovery partition. Thus there is 3 partitions in total.
As it is Vista Premium, C: is already 50% full straight after the factory reset.
Is there any way I can perform the reset and have an option to just have one C drive of 110GB? I did not see any such option when performing the reset by using ALT + F10. There doesn't seem to be an option for this when performing the reset from within Windows itself.
I was thinking maybe deleting the D partiton before performing the reset may help but I am not 100 percent sure as I am not sure if the factory image contains 1 or 2 partitions.
I have been looking into upgrading my Acer aspire 5610-4537 laptop every single place I looked said something different I finally decided I would trust the website www.crucial.com and there crucial system scanner tool which worked perfect and was correct even thought everyone else said it was wrong. My CPU had 2 caches for 2x512mb to make a 1gig of ram which is no where near enough for this laptop to be running windows vista or even thinking of running multiple programs. So after I ran the crucial scanner tool it told me what ram I had currently and how much I could add to my system it picked 2 GB 200pin ddr2 sodimm 256x64 pc2-5300 dual die so I ordered two of them to bring my system to 4gigs. I was a little worried because I do only have a 32bit operating system but all I had to was unplug the old chips and insert the new ones and press power and that was it no updates no changing bios or operating system so I would highly recommend using this web site.
Processor Genuine Intel(R) CPU T2250 @ 1.73GHz
Memory (RAM) 4.00 GB Graphics Mobile Intel(R) 945 Express Chipset Family Gaming graphics 256 MB Total available graphics memory Primary hard disk 21GB Free (53GB Total) Windows Vista (TM) Home Premium
what is the highest capacity HDD I could use in the Aspire 5610 Series please? At the moment, I have a 160gb SATA HDD but would like to upgrade to a higher capacity if at all possible?
I was reading one of your discussions about the orbicam and I did just like the person I read about. I reformated my computer and the cam doesn't work now. When I click it on I get this message-a problem cause the program to stop working correctly. Windows will close the program and notify you if a solution is available. I have not got any response from windows.
Just taken ownership of a 2nd hand 5101. looks like it has been reset back to factory settings but the built in orbicam doesn't seem to work properly !
I have tried reading various posts, I have tried to install both the bison and logitech drivers , but all I get is a greyed out screen no matter what I am using ...msn messenger, orbicam software, etc ...
going through the hardware check etc , it says all ok with cam ?
I installed the Acer Webcam software & driver and just the driver separately, the download files came from the Acer website. Neither of these allowed me to use my webcam.
When I first got the laptop, the camera was working fine, so it isn't a hardware problem. I recently changed my OS to Windows XP Pro SP3.
The software (both the Orbicam software and the thing in My Computer for windows that usually lets you use the camera) say that another software is using the camera.
After buying this notebook with Vista preinstalled I was surprised at how slow it was so I removed Vista and installed XP SP2. Now, still Win XP only sees 3 of the 4 GB RAM, but further the notebook is soooooooooo much faster. All seems to work well except for one thing, that damn orbicam. I downloaded the XP drivers for it from the ACER website, but there were two versions; bizoncam and logitech. I tried both, but it just won't work.
When Camera Driver Bison Ver.5.0.0.10 is installed and I open Acer orbicam nothing happens, no program opens. When Camera Logitech Ver.9.4.4.1082 is installed I can open the program, but it says: connect the camera while showing an USB-cable, but it's an integrated webcam, not external! But the crazy thing is, in MSN Messenger everything works without a problem!
Is there another driver? In the hardware (I run a Dutch version, don't know the English tab name) tab of 'my computer' I don't see any webcam, just an USB-Videodevice.
My built-in camera ceased to work a while ago, and nothing I have done has made any difference. Can anyone give me any guidance? I think it is a software issue, but I am not certain.
I have an Aspire 5672WLMI Windows XP Home Edition Service Pack 3 2048 Megabytes Installed Memory PIONEER DVD-RW DVR-K06RS
Seagate Momentus 5400.2 SATA 1.5Gb/s 120-GB Hard Drive
I have an Acer 5610-4610 system. It was repartitioned to one XP drive for several years. I am finally wanting to put the PQ service partition back on it but none of the folders of the restore CD's have any of the files needed to recreate this partition. I am wanting to put the factory (VISTA Home Premium) system on C. With all the system files and folders from the 3 restore CD's into the PQSERVICE partition. I have no clue how to proceed.
I do remember there was an acer(C) partition and a data (D) partition when I got it. The PQSERVICE partition was there back then.
The first (System) CD has none of the files mbrwrdos.exe or rtmbr.bin used to create the PQSERVICE system.
I run the ACER Disk Formatter and it cannot find any drives on the laptop.
Weird! From what I've been able to glean my thought was that that the Formatter disk would facilitate creating the correct partitions?
I just bought 2x2gb ram from my Acer Extensa 5610 and my Windows 7 x64 can see it right, but only use 3gb. Resource monitor says the other 1gb is Hardware reserved. In the Bios theres an info saying extended memory 3gb. Is that what the problem is? coz its not something I can set in this version of bios.
Do i have to upgrade my bios? if so, to what version? The manual clearly says i can upgrade to 4gb. (extensa 5610 has intel 945 chipset)
How I put the bluetooth back on my 5610? When I first got the laptop, bluetooth was enabled (I think) as there was a blue LED lit on the front of the machine by the sliding bluetooth control button. I have since had to reformat as I loaded some drivers for a Compro TV stick that was 'supposed' to be Vista compatible. Needless to say, it screwed everything up so I ended up just reformatting and reloading everything. I have been to the Acer FTP site as Acer themselves told me to do and clicked on the Vista link and downloaded the Bluetooth program and loaded it but nothing happens? No blue LED or nowt.
I want to stop using my wireless connection on my laptop and plug an ethernet lead in.
But when I plug this lead in my laptop just stays connected to to my wireless network. I tried disabling the Wireless on my computer then putting the lead in but still it wont attempt to connect to the internet with the ethernet lead in. What driver do I need to download so it will recognize the lead is in the laptop and attempt to connect to the internet?
He had a broken screen and a virus. I repaired his screen and he then took it to a "buddy" who partitioned the HD to save the pictures ect on it and put XP on the other partition.
My brother was updating drivers when he rebooted it and it just wouldn't restart.
This is a description of the problem: "I hit the power button , lights come on (no HD light though). and the Fan spins for about 30 seconds and stops. After about 1 minute the fan starts back up and stays on. Power light , battery charger light stay on but nothing happens."
I pulled the covers off the back and everything seems seated and where it belongs.
Recovery disks have been ordered (before I knew the full extent of the problem) and will be here in a week or so but I don't think they will do any good on a system that wont boot.
I have repaired a few desktops but this is my 1st laptop repair.
My Acer 5610 had a "Supervisor Password" entered, I believe by my grandson two years ago. I noticed it once, didn't know how go get in so never did. Recently had a bad day. Used what I had for a restore back a few days, nothing worked.
I have the two Recovery Disk I made the day I bought this. Never used them. I can't get the disk to take hold and restore to Factory. I get a message I'm going to try to attach. It's not clear. What is stumping me is the last entry. "[ /NoExecute=Option]" That is the bottom. On the bar at the bottom is "ENTER=Submit" I've tried every thing I know to do.
I've learned to use the PC on my own as I live many miles from a city. Done fair but now I'm stumped. By the way I'm 75 years of age. My learning term as been more than 7 years.
The Hitachi-LG GSA-4082N cd/dvd burner seems to have mostly died. It only occasionally recognises that a disk is in the drive, and burns almost always fail.
I've tried cleaning the lens and I've removed the unit and given the contacts a clean and a dust down. Still problematic.
I'm assuming that there's a hardware fault on the drive.
I'd like to replace the drive but the only GSA-4082N I can find are 2nd-hand out of old lHPs etc on eBay.
Is there a new and not-too-expensive unit that will work as a drop-in replacment?
I am using a Acer 5610 with Vista and a touchpad. Often when I am moving my pointer over a list of files, with the touchpad, the pointer drags and drops files without clicking. Very annoying. I undo alot of unwanted moves. Acer email support does not respond....
My Acer Aspire One, which I love, does one thing that drives me NUTS! The touchpad, mainly noticed in games (FPS are the most detectable), doesn't respond while pressing keys... IE, I press "W" to run forward, and the touchpad doesn't work simultaniously... I can run, or look around, but not both at the same time... why is that? No other touchpad in a laptop I've ever used had the limitaion? And, when using an external mouse, the mouse works great, meaning I can move around pressing keys on the keyboard all while looking around. It just gets annoying having to stop, look around, then move, stop, look around, move, etc.
Is this a driver problem or a hardware problem? Even the EEE Pc that I use to have didn't do this, so why the new Acer? Curious, and no idea how to fix it.... Maybe it's even a setting somewhere I'm unaware of...
Basic issue is that all of a sudden the touchpad has stopped working and that little icon that was in the systray has dissapeared. it was working fine a few weeks ago. i currently am using a USB mouse, but i need the touchpad at uni as the desk space is very limited. its a shame this issue has came up now a day before a MAJOR assesment is due, and i cant finnish it because i cant use the mouse at uni.
Anyways, so i have tried the FN+F7 thing, doesnt work. Tried Re installing and rebooting the drivers, still doesnt work. tried a system restore to when it was working. still doesnt work i have basically tried EVERYTHING mentioned on various forums and on google. nothing seems to work. the drivers appear to be installed but wont work for some reason. i will attach photos to the main options so you can see how it appears to me.
there are no bios otpions i looked for those. seriously its so weird, nothing works and its very frustrating! in the past few weeks i have installed adobe illustrator CS3, dont know if that could be the reason for it not working, but i dont think so. I have windows XP SP2. when i try installing the original drivers off a backup cd my dad made, it just installs and does nothing. i downloaded the newest drivers from the website and still the same thing. the program does appear in the program files, and the control panel/add remove, but just doesnt seem to run!
I really want a middle click and just more options in general but there seems to be no way. i called up tech support and the guy told me i have a generic mousepad and there was no on other mouse options besides the basic ones in mouse properties.
