Acer :: Aspire 5672 Orbicam And USB Ports Out
Jun 16, 2009
I'm running an Acer Aspire 5672 WLMI. Recently i upgraded my RAM and hard drive, obviously having to reinstall the OS and driver's etc. Since i made the change, i haven't been able to get the Orbicam or usb ports on the left side of my computer to work.
Luckily there are still 2 ports on the right side that work fine, and the entire rest of the computer is great, but i'd like these things to work (especially the camera). I've re-installed everything 3 times at this point with no luck. The drivers are installed and in programs the camera is listed as an optional webcam. The first time i reformatted i got and error message that said camera is currently in use and cannot be accessed. It would ding on and off repeatedly until i rebooted the computer. Currently what the camera does is basically nothing. It's detected, but when pulled up in a program (such as gmail or acer software) it's simply black. I am wondering if i maybe jostled something inside and it's disconnected or if this is a software issue.
View 4 Replies
ADVERTISEMENT
Nov 10, 2008
My built-in camera ceased to work a while ago, and nothing I have done has made any difference. Can anyone give me any guidance? I think it is a software issue, but I am not certain.
I have an Aspire 5672WLMI
Windows XP Home Edition Service Pack 3
2048 Megabytes Installed Memory
PIONEER DVD-RW DVR-K06RS
Seagate Momentus 5400.2 SATA 1.5Gb/s 120-GB Hard Drive
View 7 Replies
View Related
Jul 13, 2009
My orbicam is functioning properly but when I close my laptop lid, my computer makes a sound and when I open the lid, my computer says that new hardware was found. This "hardware" is recognized by my computer as "Acer Orbicam #2" which means for some reason, my laptop thinks that a new camera is installed or plugged in everytime I close and open my lid.
Also, it searches for a usb driver that it says the camera can connect to to go faster. But there is no actual camera, it is just recognizing my orbicam twice for some reason. This causes a problem since after awhile, when I close and open my lid, my computer goes blue screen and restarts on me.
View 5 Replies
View Related
Mar 18, 2008
I formatted my laptop and then realized that I had lost my backup disc. So i ended up installing a copy of XP Pro.
I've been able to obtain most of the drivers needed on the acer site. However, I am unable to get my USB2.0 working, and I also have issues getting the built-in webcam working as well.
View 4 Replies
View Related
Feb 11, 2009
I have an Acer Aspire 5610-4179 laptop which was recently shipped back to me from the factory. I had been experiencing several problems, all of which were detailed and only some of which were fixed. I love having it back so much, though, that I am reluctant to send it away again. Some of the problems I am running into deal with the Orbicam camera and the touchpad. I have tried updating the drivers for these, but that doesn't seem to solve the problem. The camera still says that it is not plugged into a working USB port even though it's an internal camera; the touchpad works for moving the mouse, but tapping on the touchpad does not act as a mouse-click anymore. In addition, the volume and DVD control buttons on the right side of the keyboard no longer work.
View 4 Replies
View Related
May 14, 2009
This is just my attempt to put Windows 7 on my Aspire 5672.
I know its an older model now, heck it came out in 2006 before even Vista. So I've kept it on Win XP for quite a while, hoping Vista drivers would be worked on. Now that I'm cleaning out all the junk, I figure might as well reformat. Sadly Acer doesn't provide Vista drivers for this model.
Might as well try Windows 7 RC and try finally moving to 64-bit.
Windows 7 installs smoothly, no fuss. Getting drivers is now the issue.
If I can get the minimal devices to work with the same usage as I had under XP, I'll stick with Win 7.
- Video: this uses the Mobility Radeon x1600. Sadly ATI deliberately does not support it through their Catalyst drivers. So have to use the Mobility Modder.
Sadly it doesn't seem to work for the latest Catalyst versions
Ultimately I went with DNA-ATI drivers which are pre-modded.
9.4 removes support for everything but their HD 2000 and higher series.
9.3 causes a WDM crash
9.2 seems to work okay
[url]
One thing now is that the driver is unsigned and won't load. Using the Driver Signature Override tool doesn't seem to work, nor the test mode bcdedit switch...........
View 9 Replies
View Related
Jan 22, 2009
My fan on my Aspire 5672 recently failed and I need to get me another one. I've looked all over these forums and all the links that I have found with any help were out of stock.
I was wondering if someone can point me in the right direction of where to buy one, as I'm really desperate at this point. (I even bought one from a website and they failed to inform me that it's out of stock even tho it was in stock on their site.... They still haven't given me the refund yet!)
I've contacted Acer Canada and they told me part is discontinued cause the laptop is out of warranty and they sent me to a place which was also out of stock.
View 5 Replies
View Related
Jan 2, 2008
I have a problem with my laptop, is an acer aspire 5672wmli, the model with 1gb of ram.
The drive is a Matsushita UJ-845-S, when it was new it had a firmware version 1.00 and they gave me some incompatible problems with some media, so i decided to flash with a newer version, 1.02 and after that the drive work well but I was unable to did the boot from cd.
The firmware page is this:
[url]
The firmware 1.02 is for toshiba OEM and this is why it give me this problem.
So now wath I can do, I send an email to acer-support but they want only that i send to acer but i must pay because is my fault .
My question is, I see some internal dvd drivers for notebook to buy, so I can buy one and replace with my?.
All internal drives can work fine if I replace or i must see some technical caractheristics?
View 6 Replies
View Related
Jan 5, 2009
I'm trying to find the correct drivers for the above laptop. I found this thread How To's: Acer Aspire 5672 , but it seems some of the links no longer work.
This system had XP Home originally and the HDD died. I installed a new HDD and want to install XP Pro, have disk, and do away with all the Acer stuff.
I've already performed a clean install once before of XP Pro, but wasn't able to find the correct drivers for several pieces of hardware. I'm in the USA. Is there even an Acer USA? I can't seem to find the drivers at Acer.
I have my original backup disk that I created using Acer erecovery and an XP pro install disk.
View 4 Replies
View Related
Dec 11, 2008
Right down to the matter at hand. Yesterday I was working on my laptop, plugged in, but charging, about 40%, when all of a sudden it shuts down. I wasnt doing anything overly stressful, CPU's were each at about 50% load tops (Ubuntu 8.10, mysql, apache2, rythmbox, firefox, opera, some file browsers, pidgin).
My initial thought was that the power supply adapter had gone - thus it was draining whilst i worked and i hadnt noticed (since the connector is a little worn). I noticed that the little green light was blinking rapidly on it. However when I unplugged it from the laptop, it returned to its static green state.
I went to remove the HDD today as i had to get my work from it, so I thought I would try to start it up anyway. Nothing. Whilst removing the HDD i noticed an occasional clicking (3 little consecutive clicks to be precise, as if it were trying to start but just couldnt. This happened a few times, until I removed the battery, then it stopped. I can replicate this by turning it on and it will keep happening until I remove the battery.
Also I have gone inside, attempted to clean any dust off and cleaned the battery contacts, so it is unlikely to be anything like that.
I know its an old laptop these days and sometimes these things die, but this thing has been my baby. I learnt to code on this thing, I learnt Linux on this thing and I'm not giving it up without a fight.
View 10 Replies
View Related
Oct 1, 2008
I am considering upgrading my original HD in my Aspire 5672.
what drive I should consider?
I would like at least 200GB to make it worthwhile to do.
Great if I could increase performance as well.
View 10 Replies
View Related
Dec 13, 2008
i own an aspire 5672 wmli i`ve done many upgrades to it and always try to have the latest updates for all my drivers but i`m curious i see in the europe site has different bios updates with different dates there is a update wich is the latest on 3239 from 2008 and there is another from 2/23/2007 3236 but under vista now i use vista ultimate should i use the one for vista is there some difference, some integration for vista or something or just go for the latest 3239?
View 6 Replies
View Related
Nov 27, 2008
Over the past few months I noticed my laptop was super hot to touch and the fan was working overtime. I put this down to the additional memory and bluetooth device I installed 6 months ago.
The laptop began powering off without warning. It would just die.
I took out the memory and turned off the bluetooth and started disabling services I did not need in Windows XP.
This seemed to work for a short time. I noticed the fan going full speed whenever I used GFX intensive games. After power-off in the middle of a battle in Civ IV I decided enough.
Searched on-line and found some interesting notebook tools that reported the temperature of the CPU. Yep it was super hot. It appeared to be operating about 86oC. The system will power off once the CPU reach a critical threshold.
I figured the fan effectiveness must be reduced. I opened up the 5672 and took a look at the fan. Sure enough the dust was like looking into my vacuum cleaner.
I spent about an hour with a small screw driver, tweezers, some cotton swabs (q-tips) and alcohol based cleaner bulling balls of fluff out of the fan enclosure.
After I got all the clog out the CPU now operates a comfortable 55oC. No super fan blowing or sudden-power off.
View 7 Replies
View Related
Oct 7, 2008
I own an Acer Aspire 5672AWLMI (5670 series) Inter Core duo 1,7, 2GB Ram,
Ati Mobility Radeon x1600, 120GB SATA HD @ 5400rpm.
I am thinking of making 2 upgrades after 2 years of great functionality (despite the fact that it rises high temperatures and i mostly use it on Thermaltake's TaiChi cooler)
1)Upgrade exesting HD to
Hitachi Deskstar 500 GB Internal SATA Hard Drive
7200 RPM, 16 MB Buffer - Serial ATA 3.0 Gbps
2) Upgrade RAM to 3 or 4GB
The reason i am writing is to ask if this Hard drive is compatible with my mobo or should i try to update BIOS or is not compatible at all.
What is the best option for RAM - modules, vendors etc
View 4 Replies
View Related
Jan 26, 2015
I purchased an Aspire E5-511 about a week ago. At first, I had no problems with the USB ports and what I plugged in would be recognized and work, but now none of them will recognize anything that is plugged into them. This is for multiple devices that work on other computers, so it is not the devices, and obviously it's not the hardware if all 3 simultaneously stopped working. Googling the problem has led nowhere. Additionally, the webcam used to come up automatically in the "Camera" app; this no longer works either and it says "To get started, connect a camera." I have restored the system back to factory defaults, had all files deleted and re-did the entire initial process all over again, to no avail.
View 1 Replies
View Related
Nov 23, 2008
I was reading one of your discussions about the orbicam and I did just like the person I read about. I reformated my computer and the cam doesn't work now. When I click it on I get this message-a problem cause the program to stop working correctly. Windows will close the program and notify you if a solution is available. I have not got any response from windows.
View 4 Replies
View Related
Nov 20, 2009
I have an Acer Aspire 5630 and the USB ports do not go off when Windows is shutdown, hibernating or when it goes into slleep (standby) mode. They only go off when I disconnect the AC power. I just bought an external USB drive as my internal is almost full, but I don't want to have the external drive on 24/7. Disconnecting the drive is a bit inconvenient as I use the laptop with an external display and keyboard and keep the laptop itself hidden behind my desk. I updated the BIOS to Ver. 3.60, but I don't see settings in the BIOS for USB ports. Can these ports be turn off programatically. Do I need a special Acer Application or drivers to turn off the USB ports? I removed all the Acer Management bloatware that came with the laptop. Are there any jumpers inside the laptop that need to be changed?
View 6 Replies
View Related
Mar 27, 2010
i have a acer aspire 5532 laptop. well, the usb ports(both) quit working. i tried everything from doing my laptop back to factory settings, tried un-checking turn off to save power. everything i could find, i tried. im wondering is there something i can use to get some usb ports? like in the front is a multi-in-1 card reader. is there like some adapter i can plug in there, and it have like usb ports? is there anything i can do or buy? with out taking it back. i have 3 items that use usb that i no longer can use
View 7 Replies
View Related
Mar 2, 2009
about three weeks ago i noticed the two usb ports on the left side of my laptop were turning devices off intermittantly but i put this down to a problem with the device in question which is a mobile broadband dongle. i then looked into this further as i have tried the device on another pc and it works flawlessly.
i have found now that these two usb ports are almost dead in that they will power a mouse but if i plug in anything else like a usb memory stick or mobile phone or camera both ports just shut off. the odd thing is that they appear active in device manager and show no problems but the devices i have plugged in do not connect to the laptop at all. i have used a set of recovery disks to reset to factory default which did not help.
now the real problem i have found is that there is no recovery partition on my laptop and after ringing acer support they seem unwilling to help with diagnosing simply saying that as the recovery partition was gone the warranty was void and there would be a charge for any repair. what if there was no recovery partition to start with!
my laptop has not been tampered with as the acer support person stated but as far as i can see it never had a recovery partition or for some reason this partition has gone as i had to get the recovery disks off a friend who has the same laptop. i used to have two partitions on my hard disk Acer(C) and Data(D) but now i just have one 74.5GB hard disk.
has anyone got any ideas on what has gone wrong with my laptop or how to get the usb ports working as the partition is not a real problem except for Acer! the tech asked me to reset to factory settings using the recovery partition but i cant so that was the end of acer's support.
View 5 Replies
View Related
Sep 21, 2008
Just taken ownership of a 2nd hand 5101. looks like it has been reset back to factory settings but the built in orbicam doesn't seem to work properly !
I have tried reading various posts, I have tried to install both the bison and logitech drivers , but all I get is a greyed out screen no matter what I am using ...msn messenger, orbicam software, etc ...
going through the hardware check etc , it says all ok with cam ?
I am running XP on it !
View 4 Replies
View Related
Jun 28, 2009
I installed the Acer Webcam software & driver and just the driver separately, the download files came from the Acer website. Neither of these allowed me to use my webcam.
When I first got the laptop, the camera was working fine, so it isn't a hardware problem. I recently changed my OS to Windows XP Pro SP3.
The software (both the Orbicam software and the thing in My Computer for windows that usually lets you use the camera) say that another software is using the camera.
View 4 Replies
View Related
Jul 31, 2007
After buying this notebook with Vista preinstalled I was surprised at how slow it was so I removed Vista and installed XP SP2. Now, still Win XP only sees 3 of the 4 GB RAM, but further the notebook is soooooooooo much faster. All seems to work well except for one thing, that damn orbicam. I downloaded the XP drivers for it from the ACER website, but there were two versions; bizoncam and logitech. I tried both, but it just won't work.
When Camera Driver Bison Ver.5.0.0.10 is installed and I open Acer orbicam nothing happens, no program opens. When Camera Logitech Ver.9.4.4.1082 is installed I can open the program, but it says: connect the camera while showing an USB-cable, but it's an integrated webcam, not external! But the crazy thing is, in MSN Messenger everything works without a problem!
Is there another driver? In the hardware (I run a Dutch version, don't know the English tab name) tab of 'my computer' I don't see any webcam, just an USB-Videodevice.
View 4 Replies
View Related
Jan 5, 2015
Aspire E3-112-C7LY. It had inside windows 8.1 64b. But it was difficult for her, so he bought a Windows 7 Home Edition. I did a disk deep delete and installed them. But... no drivers. I couldn't find drivers for USB ports and many others. How can i get a recovery disk? Because i cleaned totally the disk (delete also the recovery parition on it, been on GPT so i can install the Win7).
Also while in win7, i get a lot of BSOD...
View 9 Replies
View Related
Nov 28, 2014
It still did not solve the issues with my USB ports. I have noticed that the exclamation mark is no longer there but still all my USB ports are still not working.
View 1 Replies
View Related
Jan 26, 2015
I have an Acer Aspire V3-572g. My laptop came with windows 8.1 installed already. Currently, my pc is being reset to factory settings because I can not figure out how to keep the hdmi from going out after windows updates. The only way I can keep get the hdmi port to work is the factory reset it. The only way from keeping the hdmi working is by turning off windows updater. However, I'd like to figure out how to keep the hdmi working without doing so. My graphics card is Nvidia 840 M. Here are a list of things I've done after my laptop stops recognizing the hdmi.
Uninstall and reinstall the display drivers, both from intel and Nvidia
Update the drivers to be up to date
Downloaded intel's utility manager to keep driver update to date
Downloaded factory installed drivers from Acer's website
Contacting microsoft and have them remotely connect to my laptop
Restored back my laptop to previous working conditions (although the hdmi never worked by going to a restore point)
Swapped hdmi cords and displays
After several hours of researching and trying different things I'm stumped. I bought this computer with the sole purpose of connecting it to a TV. I've also had this issue with another laptop which I returned. This problem isn't a hardware problem as I'm connected to the same monitor with an old desktop using the same cords. I'm guessing there is a compatability issue with windows and the display drivers when there is an update.
View 2 Replies
View Related
Oct 25, 2008
i had my acer far a lil after a year and it died on me. i know it over heats like a fresh baked cinnamon roll in your hands. i added heat sinks to the chips helped a lil. anyway. laptop was running fine. played cod2,tf2 etc. i left it on playing music and all of a sudden, died. it just turned off. tried the power button and bought a new charger. still no go. i plug the ac adapter in without battery, nothing. when i plug it in i c the ac adapter blink. laptop shows no sign of life, none of the leds light up. i tore down the laptop for further inspection. cpu looks fine, memory looks fine, hard drive still works on my desktop.
View 10 Replies
View Related
Aug 8, 2007
I've been getting this weird, on and off, random, buzzing/almost scraping noise from the fan of my Acer 5672 laptop. It spins really loudly, I'm assuming the ball bearings are going bad or something's wrong. Is there any store or place I can check to buy a replacement? I know it's a Sunon brand fan/heatsink, but I've been searching around endlessly for a place to buy a replacement.
View 5 Replies
View Related
Mar 12, 2008
I have an Aspire 5672 and had it plug into an outlet when the circuit breaker went of in the house and when I turned it back on the Laptop there was nothing (no power light or charging with or without the battery). I am sure that I messed up something, but I am not sure how bad it is. I am comfortable digging into the workings and took it apart once already just to see if it might be a bad connection or if the had some sort of inline fuse.
View 4 Replies
View Related
Sep 14, 2009
I found a BIOS v.3239 on the Acer.com (Pan America) driver website. However I don't know if it's for Vista or still XP, the website doesn't specify like the acer europe site did, however that BIOS version is 3234.
So, does anyone know about the Panam acer site with the BIOS v.3239 for vista (or windows7)?
And no I don't need my BIOS updated from the 3234 version, just curious.
View 8 Replies
View Related
Sep 29, 2008
I bought an Acer 5672 WLMI a little over 2 years ago. I thought the Acer offered good value for the money. The specs were Intel Core Duo processor T2300, 2GB RAm, X1400 ATI Video card, 120gb HDD, 15.4" screen, winXp Pro -cost of the system was $1800 + tax (Canadian dollars).
The 5672 always ran hot. It was almost hard to keep it on my lap it sometimes got so hot. I was not even gaming. I was just doing standard web browsing/word processing. The bottom of the latop got so hot that is basically disintegrated most of the Microsoft WinXP Certification sticker. I pulled the bottom cover off and there was nothing obstructing the CPU Fan. I also would intermittently get a green/blue? line about 3-4 inches wide down the middle of the screen. This green/blue line was intermittent. Generally, the screen problem and the heat problem became worse as the 5672 became older.
After 15 months the hard drive failed. I put in a new 160gb HDD. Acer never gave me the original winXP CD and the Win XP Certification Sticker had burned itself off. I reinstalled another copy of winXP Pro that I had. The laptop ran ok for a bit, but then the wireless starting acting up...I would get dropped wireless connections and sometimes it could not detect wireless signals that I knew were there. I stopped using the wireless completely.
After about 18 months the CPU fan started to make an intermittent noise. At approx 2 years, the CPU fan failed completely. I thought I could replace the CPU fan, but realized the CPU was an intergrated unit with cooling tubes and cooled the CPU chip in addition to some other chips on the motherboard. I checked the Acer web site and did not see this part listed (not many parts were listed). I checked on ebay saw a few posting for a new fan/cooling unit -cost was approx $170. I debated whether or not I wanted to spend $200 and time fixing a 2 year laptop...that always ran hot and had some potential screen issues.
For a few days I ran the latop with no CPU fan and used an external fan to try and keep everything cool. I had motherboard monitor and could see this was not working and temps were getting high. I was debating what to do, when the laptop just died. The screen displayed a bunch of funky colours and then it just died. I was able to power it up again, but a few minutes later it did the same thing (funky colours on the display and shutdown by itself). I tried rebooting and nothing..it was dead. I pulled the hard drive and checked that it was ok...............
View 10 Replies
View Related
