Acer :: Aspire 5532 - Usb Ports Quit Working
Mar 27, 2010
i have a acer aspire 5532 laptop. well, the usb ports(both) quit working. i tried everything from doing my laptop back to factory settings, tried un-checking turn off to save power. everything i could find, i tried. im wondering is there something i can use to get some usb ports? like in the front is a multi-in-1 card reader. is there like some adapter i can plug in there, and it have like usb ports? is there anything i can do or buy? with out taking it back. i have 3 items that use usb that i no longer can use
View 7 Replies
ADVERTISEMENT
Jan 7, 2014
I have a 11month old HP envy touchsmart m7 sleekbook and all USB ports quit working. I have GEEK-SQUAD tech support and after they uninstalled drivers are unable to restore and was told to have repair done on WARRANTY. Do I need to contact and send in or can be done in store? 1 year coming up in a few days
View 1 Replies
View Related
Nov 12, 2009
i have a sony VGN-FW463J/B and it turns out that none of my usb ports are working. i tried to like uninstall the usb controller (not sure if i did it right) and it didnt fix the problem at all
View 3 Replies
View Related
Feb 5, 2015
Bought an Acer E 15 ES1-512-c88m first of December. Barely got 12-20 hours of use out of it. Worked fine for 3 weeks and then all of the sudden last night I opened the lid after sitting idle plugged in for 20 hours and immediately the touchpad began acting like I was trying to highlight, drag, or draw boxes around things continuously - when all I was trying to do was move he cursor. At first I assumed it was cold or confused. Shutdowns, restarts, HID driver reinstalls did nothing. After a hour or two of troubleshooting the touchpad performance worsened, to where at this point NO clicks of taps of any kind will work, so I can't pick or select anything - and am forced to navigate menus and options by keyboard - many of which I can't get to.
Final result: all I can do now with the touchpad is move the cursor around, but nothing else. The clicker is mechanically free and never stuck.I'm disappointed because my older Acer 10" D255 from 2011 has never had any issues.Sadly the only impression I'm getting is that the circuitry for the "click" function either shorted or has somehow gone "out of spec" or "out of cal". There is no way to even find out what kind of touchpad it is, because it's not listed on any data sheets.I'm guessing the best thing to do is get it replaced free of charge because it is practically new, but I wondered if there may be any other solutions with less hassle. Who would do this - Acer or NewEgg (where I got it from)?
View 8 Replies
View Related
Dec 29, 2014
I have an Aspire E1-572 that is five months old, running Win 8.1. I've loved the notebook to this point, but now the speakers have quit working completely (the headphone jack still works). I called tech support and they had me delete and reinstall the driver (Realtech high definition audio), which made no difference.
She then told me the next step is to refresh my Windows installation, which will apparently blow away everything I've installed since it was new. I declined to do that because I really don't want to spend an entire day reinstalling all the programs, even though I have the data backed up. Is this truly the only way to make a final determination if it's a hardware or software problem?
View 8 Replies
View Related
Feb 7, 2010
I just purchased my first laptop, I wanted a cheap, but functional laptop, so I choose the Acer Aspire 5532. I've been building and repairing PCs for years, but I have never messed with Laptop repair other then software issues and replacing RAM. I decided to upgrade the CPU to a AMD Turion 64 X2 Dual Core TL60. I started to try and disassemble the laptop, but I can't for the life of me figure out how to do so. I've looked for tutorials for the 5532 with no luck, and I've looked at video tutorials on youtube, but they don't have any for the 5532. Can someone please give me some insight, or point me in the right direction?
View 4 Replies
View Related
Jan 26, 2015
I purchased an Aspire E5-511 about a week ago. At first, I had no problems with the USB ports and what I plugged in would be recognized and work, but now none of them will recognize anything that is plugged into them. This is for multiple devices that work on other computers, so it is not the devices, and obviously it's not the hardware if all 3 simultaneously stopped working. Googling the problem has led nowhere. Additionally, the webcam used to come up automatically in the "Camera" app; this no longer works either and it says "To get started, connect a camera." I have restored the system back to factory defaults, had all files deleted and re-did the entire initial process all over again, to no avail.
View 1 Replies
View Related
Mar 6, 2015
I have a problem with the video being all messed up in my Acer laptop. I made a short video which shows the problem - basically it's a persistent blue colored lines flickering everywhere where the background is supposed to be white and stable. Needles to say it renders my laptop almost unusable.
[URL]
View 3 Replies
View Related
Nov 28, 2014
It still did not solve the issues with my USB ports. I have noticed that the exclamation mark is no longer there but still all my USB ports are still not working.
View 1 Replies
View Related
Jan 26, 2015
I have an Acer Aspire V3-572g. My laptop came with windows 8.1 installed already. Currently, my pc is being reset to factory settings because I can not figure out how to keep the hdmi from going out after windows updates. The only way I can keep get the hdmi port to work is the factory reset it. The only way from keeping the hdmi working is by turning off windows updater. However, I'd like to figure out how to keep the hdmi working without doing so. My graphics card is Nvidia 840 M. Here are a list of things I've done after my laptop stops recognizing the hdmi.
Uninstall and reinstall the display drivers, both from intel and Nvidia
Update the drivers to be up to date
Downloaded intel's utility manager to keep driver update to date
Downloaded factory installed drivers from Acer's website
Contacting microsoft and have them remotely connect to my laptop
Restored back my laptop to previous working conditions (although the hdmi never worked by going to a restore point)
Swapped hdmi cords and displays
After several hours of researching and trying different things I'm stumped. I bought this computer with the sole purpose of connecting it to a TV. I've also had this issue with another laptop which I returned. This problem isn't a hardware problem as I'm connected to the same monitor with an old desktop using the same cords. I'm guessing there is a compatability issue with windows and the display drivers when there is an update.
View 2 Replies
View Related
Sep 25, 2014
I had a hard disk fail and had to reinstall Windows 7 on a new disk, but I could not read the COA. I ordered the recovery disks and now have a slight problem. When I try and boot to the System Disk 1 I get a no bootable media on disk message. I installed Windows 7 from a DVD I have for another computer and it works fine, but I can not validate Windows. How can I make the laptop run System Disk 1?
View 1 Replies
View Related
Jul 23, 2009
The fan located on the bottom of my xps-1330 quit working. Can I replace the fan alone or is there parts that need replacement?
View 6 Replies
View Related
Nov 4, 2014
I have a E1-571 with 3 usb ports. The one on the left works but the two on the right have never worked.
View 1 Replies
View Related
Sep 20, 2009
A couple days ago, Windows (Vista Home Premium 64) updated to SP2 and I lost sound. Now, when I boot my computer, the mute button stays orange and also the IDT control panel does not load. When I try to load it manually, it says the driver is not accessible.
I searched online quick and it sounds like I'm not the only one with this problem--though I haven't seen any fixes.
HP hasn't listed an updated driver for my particular computer yet, and last time I tried to update my audio driver, I ended up with all of these features that for some reason didn't work and made things sound worse and run slow.
It's times like these when I wonder why the heck I put up with all the inconsistencies I've had with Vista
System restore is a very last resort for me.
View 5 Replies
View Related
Feb 28, 2013
I have a E1405 that quit working. I replaced the keypad and got a new battery. It won't boot. The only thing that happens is the Numlock, Caps lock and a third led, which escapes me now comes on and stays on for about thirty seconds. I checked to see if the ram was loose, removed and re-installed the cmos battery, even tried my spare HD. I am thinking the system board might be toast.
View 3 Replies
View Related
May 31, 2013
Within the last couple of weeks, the sound quit working on my laptop. Since purchasing, I have been able to mute the sound and turn it back on with no trouble, but now when I unmute the sound, nothing happens. The sound icon and the Volume Mixer all show that the sound is working and is set at the highest volume, but nothing comes out. Given that this laptop has beatsaudio, it's frustrating.
View 9 Replies
View Related
Feb 19, 2013
I have the above laptop. It quit working, when I turn it on it goes to a blank screen. The mouse arrow still works
1hn2sn1 I have no warranty or the reboot or take it back where it was. Not sure what to do.
View 4 Replies
View Related
Jan 2, 2015
My wife was on her Studio 1550 the other night. I moved the laptop a little bit so she could show me something. When I moved it, the screen went white and then it quite working. The back of the laptop and the mouse pad got real hot and smelled hot.
It will not power up at all now with the battery or the power cord. It will not do anything when you press the power button. When the power cord is plugged in the laptop continues to get very hot and actually smoked a little bit once.
What happened to the laptop or if it can be fixed? Did the motherboard get fried somehow?
View 4 Replies
View Related
Oct 13, 2014
I have a TravelMate TMP645-MG connected to ProDock II. The problem is that the USB ports on docking staion are not working, I can see the following yellow exclamation mark in device manager when the docking station is connected (no errors when not docked).
Windows 8.1 Enterprise, 64bit. All latest drivers from Acer homepage are installed.
View 1 Replies
View Related
Jun 16, 2009
I'm running an Acer Aspire 5672 WLMI. Recently i upgraded my RAM and hard drive, obviously having to reinstall the OS and driver's etc. Since i made the change, i haven't been able to get the Orbicam or usb ports on the left side of my computer to work.
Luckily there are still 2 ports on the right side that work fine, and the entire rest of the computer is great, but i'd like these things to work (especially the camera). I've re-installed everything 3 times at this point with no luck. The drivers are installed and in programs the camera is listed as an optional webcam. The first time i reformatted i got and error message that said camera is currently in use and cannot be accessed. It would ding on and off repeatedly until i rebooted the computer. Currently what the camera does is basically nothing. It's detected, but when pulled up in a program (such as gmail or acer software) it's simply black. I am wondering if i maybe jostled something inside and it's disconnected or if this is a software issue.
View 4 Replies
View Related
Nov 20, 2009
I have an Acer Aspire 5630 and the USB ports do not go off when Windows is shutdown, hibernating or when it goes into slleep (standby) mode. They only go off when I disconnect the AC power. I just bought an external USB drive as my internal is almost full, but I don't want to have the external drive on 24/7. Disconnecting the drive is a bit inconvenient as I use the laptop with an external display and keyboard and keep the laptop itself hidden behind my desk. I updated the BIOS to Ver. 3.60, but I don't see settings in the BIOS for USB ports. Can these ports be turn off programatically. Do I need a special Acer Application or drivers to turn off the USB ports? I removed all the Acer Management bloatware that came with the laptop. Are there any jumpers inside the laptop that need to be changed?
View 6 Replies
View Related
Mar 2, 2009
about three weeks ago i noticed the two usb ports on the left side of my laptop were turning devices off intermittantly but i put this down to a problem with the device in question which is a mobile broadband dongle. i then looked into this further as i have tried the device on another pc and it works flawlessly.
i have found now that these two usb ports are almost dead in that they will power a mouse but if i plug in anything else like a usb memory stick or mobile phone or camera both ports just shut off. the odd thing is that they appear active in device manager and show no problems but the devices i have plugged in do not connect to the laptop at all. i have used a set of recovery disks to reset to factory default which did not help.
now the real problem i have found is that there is no recovery partition on my laptop and after ringing acer support they seem unwilling to help with diagnosing simply saying that as the recovery partition was gone the warranty was void and there would be a charge for any repair. what if there was no recovery partition to start with!
my laptop has not been tampered with as the acer support person stated but as far as i can see it never had a recovery partition or for some reason this partition has gone as i had to get the recovery disks off a friend who has the same laptop. i used to have two partitions on my hard disk Acer(C) and Data(D) but now i just have one 74.5GB hard disk.
has anyone got any ideas on what has gone wrong with my laptop or how to get the usb ports working as the partition is not a real problem except for Acer! the tech asked me to reset to factory settings using the recovery partition but i cant so that was the end of acer's support.
View 5 Replies
View Related
Jan 5, 2015
Aspire E3-112-C7LY. It had inside windows 8.1 64b. But it was difficult for her, so he bought a Windows 7 Home Edition. I did a disk deep delete and installed them. But... no drivers. I couldn't find drivers for USB ports and many others. How can i get a recovery disk? Because i cleaned totally the disk (delete also the recovery parition on it, been on GPT so i can install the Win7).
Also while in win7, i get a lot of BSOD...
View 9 Replies
View Related
Apr 29, 2010
The left click on my 3690 has quit working,and when I use the touch pad to control the cursor,it drags a blue box around.I tried uninstalling the drivers and reinstalling but I get the same problem.I also tried to update the drivers with no luck.I think it's a hardware problem.Any other suggestions?I wouldn't worry about it,but I use it to run my GPS,and I can't use a mouse in my vehicle.
View 4 Replies
View Related
Sep 4, 2014
I own a Envy Dv6 operating Windows 8.1... After one particular shut down, all my USB ports refused to work.
I checked my device manager and it showed that all my USB controllers are working properly, but under other devices three new unknown device showed up with an yellow triangle containing an exclaimation mark showed up. Right clicked and it says that the driver is not installed, but I can't seem to find any that the system is willing to recognise.Without USB ports these days, I find it difficult to function properly.
View 9 Replies
View Related
Mar 2, 2009
I have a DV5T and just the other day the USB devices stopped working, my printer, my mouse, etc.
They provide power, because when I plug my laptop cooler in via USB it kicks on, does anyone know how or why it won't recognize the USB devices?
View 6 Replies
View Related
Oct 2, 2014
My usb ports on my HP Pavilion dv7-6b56nr Entertainment Notebook PC are not working. Windows 7 Home Premium 64 bit. Product # A1T84UA. No matter what I do I can't get them to work. When I go into device manager it is showing a conflict. When I try to update the drivers it says they are up to date. I even tried to do a full system recovery and if it wasn't for an image I saved my computer would have become a paper weight.
View 6 Replies
View Related
Sep 4, 2014
I installed Windows 7 64-bit, on my notebook. After that I installed drivers for WIndows 7 64-bit from official HP site, but two USB ports not working, only one works. In device manager i have error on Universal Serial Bus Controler. Where I can find driver?
View 5 Replies
View Related
Oct 19, 2014
Product: HP Envy 17 Notebook PC
Operating System: Windows 8.1
When I try and use the USB ports on my laptop, the system does not acknowledge the device is plugged in, nor allows the device to operate. There are no error messages and the safetly remove hardware icon does not appear. This problem began after I ran a couple of Windows Updates before shutting my computer down for the night.
The devices worked properly before but have since stopped. Multiple devices have been tried, but to no avail.
View 2 Replies
View Related
Apr 22, 2010
I just bought a studio xps 1647 from best buy and today the usb ports stopped working. They could not see multiple jump drives I inserted.
Is this a win 7 flaw or is something wrong with my laptop? It was in sleep earlier. My theory is that the laptop just didn't wake the ports coming out of sleep mode. I'm contemplating returning the laptop for another.
View 10 Replies
View Related
