I own a Envy Dv6 operating Windows 8.1... After one particular shut down, all my USB ports refused to work.
I checked my device manager and it showed that all my USB controllers are working properly, but under other devices three new unknown device showed up with an yellow triangle containing an exclaimation mark showed up. Right clicked and it says that the driver is not installed, but I can't seem to find any that the system is willing to recognise.Without USB ports these days, I find it difficult to function properly.
When I try and use the USB ports on my laptop, the system does not acknowledge the device is plugged in, nor allows the device to operate. There are no error messages and the safetly remove hardware icon does not appear. This problem began after I ran a couple of Windows Updates before shutting my computer down for the night.
The devices worked properly before but have since stopped. Multiple devices have been tried, but to no avail.
My usb ports on my HP Pavilion dv7-6b56nr Entertainment Notebook PC are not working. Windows 7 Home Premium 64 bit. Product # A1T84UA. No matter what I do I can't get them to work. When I go into device manager it is showing a conflict. When I try to update the drivers it says they are up to date. I even tried to do a full system recovery and if it wasn't for an image I saved my computer would have become a paper weight.
I have a 11month old HP envy touchsmart m7 sleekbook and all USB ports quit working. I have GEEK-SQUAD tech support and after they uninstalled drivers are unable to restore and was told to have repair done on WARRANTY. Do I need to contact and send in or can be done in store? 1 year coming up in a few days
I installed Windows 7 64-bit, on my notebook. After that I installed drivers for WIndows 7 64-bit from official HP site, but two USB ports not working, only one works. In device manager i have error on Universal Serial Bus Controler. Where I can find driver?
I just bought a studio xps 1647 from best buy and today the usb ports stopped working. They could not see multiple jump drives I inserted.
Is this a win 7 flaw or is something wrong with my laptop? It was in sleep earlier. My theory is that the laptop just didn't wake the ports coming out of sleep mode. I'm contemplating returning the laptop for another.
i have a sony VGN-FW463J/B and it turns out that none of my usb ports are working. i tried to like uninstall the usb controller (not sure if i did it right) and it didnt fix the problem at all
I have purchased a USB 3.0 hard drive, but it only works in my USB 2.0 port.I found what looks to be the solution in a previous thread linked below, however the link to one of the drivers in the thread no longer works.
[URL]
I have tried using the "Dell Driver Analyze Utility", but when I get to the stage where I need to run the "Dell System Detect" application I get an error.
When I recieved my Y510p about 8 months ago, the usb ports worked perfectly fine. Around October they stopped working properly. The only solution which I found to work was doing a system restore. When I did this, an Unrecognized Device in the Device Manager was no longer unrecognized, and was instead replaced by USB xHCL (or something along those lines). However, as soon as i restared my computer again, the ports broke, and the unrecognized device reappeared. Repeating the restore followed by a restart breaks the ports every time.
i bought pavilion dv6-6165tx 2 years back and ibought a new internal hdd as my old one became corrupt , i installed os win 7 pro (licensed ) and drivers from HP online.
now the problem is that my left side usb ports are not working , and also my finger print reader
I have a problem on my Dell laptop Inspiron N4050, all USB ports suddenly stopped working, I tried to troubleshoot my laptop to fix the problem but it didn't work.
I upgraded the version of my BIOS, the chipset, and downloaded the latest version of the driver but still not working, I even tried to re-format my laptop but the problem is still the same.
I've bought 2 Inspiron N7110 laptops. Both have win7 64bit OS, and 2 usb ports (3.0 ports) are not working. I have all the latest drivers form dell's web page, but I can't get them to work. Is this a driver issue or this laptop series is affected by Chipset circuit design issue? Should I return them, or there is something wrong with drivers, and it can be fixed?
I purchased an Aspire E5-511 about a week ago. At first, I had no problems with the USB ports and what I plugged in would be recognized and work, but now none of them will recognize anything that is plugged into them. This is for multiple devices that work on other computers, so it is not the devices, and obviously it's not the hardware if all 3 simultaneously stopped working. Googling the problem has led nowhere. Additionally, the webcam used to come up automatically in the "Camera" app; this no longer works either and it says "To get started, connect a camera." I have restored the system back to factory defaults, had all files deleted and re-did the entire initial process all over again, to no avail.
i have a acer aspire 5532 laptop. well, the usb ports(both) quit working. i tried everything from doing my laptop back to factory settings, tried un-checking turn off to save power. everything i could find, i tried. im wondering is there something i can use to get some usb ports? like in the front is a multi-in-1 card reader. is there like some adapter i can plug in there, and it have like usb ports? is there anything i can do or buy? with out taking it back. i have 3 items that use usb that i no longer can use
recently installed windows 7 on my laptop 15-n203tx
problem is my usb ports are working great in pre installed win 8.1 but now in win 7 just one port is working and it is usb port 2.0 and other two are 3.0 and not working!
I've had this laptop for about a year or two and all of sudden my two left usb 3.0 ports stop working, although when I first turn on my laptop, the left side works for about a second and then stops working. My right usb port which is the 2.0 one works just fine.
I've installed win7 64bit on my Ideapad S410p. The problem is 2 USB3.0 ports can't be used, only 1 USB2.0 that can be used. The driver was installed and nothing wrong. In order to use USB3.0, I need to plug in the device and then restart my laptop. I must do that every time plug to USB3.0.
All 4 of the usb ports on my dv8000 stopped working. Ive tried updating the drivers, no luck. It originally had XP as the operating system but it was upgraded to windows 7, i dont knows if the usb drives are corrupt or what. When i plug anything into the usb ports it does nothing.
After a fresh install of Win 7 Pro 64bit, I'm not able to get the drivers installed for the 2 3.0 USB ports on the left hand side of this laptop. I did install the chipset, which is supposed to include the drivers for those ports, as the first driver installed after the fresh install of Win 7 but it doesn’t seem to work.
I bought a Dell N5110 last month but about 2 weeks ago, the USB port to the right side stopped working completely. And just today i noticed the USB port at the back has also stopped working. I now only have the left side port working and fear that may seize to work soon.
When i go to the device manager and click on "Other devices" i have this device in list "Universal Serial Bus (USB) Controller" One of which have a yellow error icon of some sort. When i double click either of them this is the message i get:
The drivers for this device are not installed. (Code 28) &There is no driver selected for the device information set or element,To find a driver for this device, click Update Driver.
I am in the process of downgrading an HP 15-g013dx (J5T33UA) laptop from Windows 8.1 to Windows 7. This is a quad-core AMD A8 APU system.
I am having trouble with USB 2.0 devices not being recognized by the hardware. I have all the devices installed in device manager, but the computer will not detect USB 2.0 devices.
It will recognize USB 3.0 devices just fine when they are plugged into the USB 3.0 port, but neither of the USB 2.0 ports. USB 2.0 devices won't work in any port. I can't confirm USB 1.1 devices at this time.
CMOS setup is set to Legacy mode: Disable.
Is there an additional driver or configuration that I am missing, or is there another issue going on?
I purchased a manufacturer refurbished Lenovo Thinkpad T410 2522EC8 a few days ago. My USB ports are simply not responding to anything. I've tried uninstalling and reinstalling the drivers. The only sign the USB ports show is when I plug in my mouse, the mouse lights up, but it doesn't actually work. Also, when I look under disk management, the only drives that show up are System Reserved, C: Drive, and D: Drive.
I have upgraded to windows 8.1 and since that moment, my USB ports are not working anymore; tried to check them, but nothing works (de-installation, ...) I have a HP Pavilion 15-B050EB; I cannot find the drivers for the USB ports on the HP site.
