I installed Windows 7 64-bit, on my notebook. After that I installed drivers for WIndows 7 64-bit from official HP site, but two USB ports not working, only one works. In device manager i have error on Universal Serial Bus Controler. Where I can find driver?
View 5 RepliesMy usb ports on my HP Pavilion dv7-6b56nr Entertainment Notebook PC are not working. Windows 7 Home Premium 64 bit. Product # A1T84UA. No matter what I do I can't get them to work. When I go into device manager it is showing a conflict. When I try to update the drivers it says they are up to date. I even tried to do a full system recovery and if it wasn't for an image I saved my computer would have become a paper weight.
View 6 Replies View Relatedi bought pavilion dv6-6165tx 2 years back and ibought a new internal hdd as my old one became corrupt , i installed os win 7 pro (licensed ) and drivers from HP online.
now the problem is that my left side usb ports are not working , and also my finger print reader
when i checked in device manager i have 2 errors
1.)Universal Serial Bus (USB) controller
2.)Unknown device
and the hardware id's are as follows
PCIVEN_1033&DEV_0194&SUBSYS_3388103C&REV_04PCIVEN_1033&DEV_0194&SUBSYS_3388103CPCIVEN_1033
&DEV_0194&CC_0C0330PCIVEN_1033&DEV_0194&CC_0C03
USBVID_138A&PID_0018&REV_0078USBVID_138A&PID_0018
I bought a new hard drive and replaced my old one and installed windows 7 instead of windows 8 .
All drivers are installed but except this one? IUSB3ROOT_HUB30&VID_8086&PID_1E31&REV_0004&SID_18FD103C ..
All 4 of the usb ports on my dv8000 stopped working. Ive tried updating the drivers, no luck. It originally had XP as the operating system but it was upgraded to windows 7, i dont knows if the usb drives are corrupt or what. When i plug anything into the usb ports it does nothing.
View 4 Replies View RelatedI have upgraded to windows 8.1 and since that moment, my USB ports are not working anymore; tried to check them, but nothing works (de-installation, ...) I have a HP Pavilion 15-B050EB; I cannot find the drivers for the USB ports on the HP site.
View 6 Replies View RelatedI bought a an HP Pavilion g6-2288ca. Uninstalled Windows 8 and installed Windows 7 Ultimate 64-bit.My left USB ports are not working. I'm assuming USB3. They have an exclamation mark beside them under device manager. USB Host controller .I've read many solutions, none worked.
#1 Checked the HP drivers page. They don't have ANYTHING listed for USB for the g6-2288ca nor for Windows 7 .
#2 I called HP, with no support. They said to check with Microsoft (????)
#3 I did all the Windows updates.
#4 I installed the full AMD Catalyst driver and software.
#5 Updated Bios. (tried to see if I can disable USB3 in the BIOS).. But it wasn't there.
My USB ports are still not working.
I own a Envy Dv6 operating Windows 8.1... After one particular shut down, all my USB ports refused to work.
I checked my device manager and it showed that all my USB controllers are working properly, but under other devices three new unknown device showed up with an yellow triangle containing an exclaimation mark showed up. Right clicked and it says that the driver is not installed, but I can't seem to find any that the system is willing to recognise.Without USB ports these days, I find it difficult to function properly.
I have a E1-571 with 3 usb ports. The one on the left works but the two on the right have never worked.
View 1 Replies View RelatedI have a DV5T and just the other day the USB devices stopped working, my printer, my mouse, etc.
They provide power, because when I plug my laptop cooler in via USB it kicks on, does anyone know how or why it won't recognize the USB devices?
I have a 11month old HP envy touchsmart m7 sleekbook and all USB ports quit working. I have GEEK-SQUAD tech support and after they uninstalled drivers are unable to restore and was told to have repair done on WARRANTY. Do I need to contact and send in or can be done in store? 1 year coming up in a few days
View 1 Replies View RelatedProduct: HP Envy 17 Notebook PC
Operating System: Windows 8.1
When I try and use the USB ports on my laptop, the system does not acknowledge the device is plugged in, nor allows the device to operate. There are no error messages and the safetly remove hardware icon does not appear. This problem began after I ran a couple of Windows Updates before shutting my computer down for the night.
The devices worked properly before but have since stopped. Multiple devices have been tried, but to no avail.
I just bought a studio xps 1647 from best buy and today the usb ports stopped working. They could not see multiple jump drives I inserted.
Is this a win 7 flaw or is something wrong with my laptop? It was in sleep earlier. My theory is that the laptop just didn't wake the ports coming out of sleep mode. I'm contemplating returning the laptop for another.
i have a sony VGN-FW463J/B and it turns out that none of my usb ports are working. i tried to like uninstall the usb controller (not sure if i did it right) and it didnt fix the problem at all
View 3 Replies View RelatedI have purchased a USB 3.0 hard drive, but it only works in my USB 2.0 port.I found what looks to be the solution in a previous thread linked below, however the link to one of the drivers in the thread no longer works.
[URL]
I have tried using the "Dell Driver Analyze Utility", but when I get to the stage where I need to run the "Dell System Detect" application I get an error.
When I recieved my Y510p about 8 months ago, the usb ports worked perfectly fine. Around October they stopped working properly. The only solution which I found to work was doing a system restore. When I did this, an Unrecognized Device in the Device Manager was no longer unrecognized, and was instead replaced by USB xHCL (or something along those lines). However, as soon as i restared my computer again, the ports broke, and the unrecognized device reappeared. Repeating the restore followed by a restart breaks the ports every time.
View 7 Replies View RelatedI have a problem on my Dell laptop Inspiron N4050, all USB ports suddenly stopped working, I tried to troubleshoot my laptop to fix the problem but it didn't work.
I upgraded the version of my BIOS, the chipset, and downloaded the latest version of the driver but still not working, I even tried to re-format my laptop but the problem is still the same.
My laptop is already out of warranty.
I've bought 2 Inspiron N7110 laptops. Both have win7 64bit OS, and 2 usb ports (3.0 ports) are not working. I have all the latest drivers form dell's web page, but I can't get them to work. Is this a driver issue or this laptop series is affected by Chipset circuit design issue? Should I return them, or there is something wrong with drivers, and it can be fixed?
View 16 Replies View RelatedHP Split 13 X3 M110sa- USB ports on right side not working
View 3 Replies View RelatedI purchased an Aspire E5-511 about a week ago. At first, I had no problems with the USB ports and what I plugged in would be recognized and work, but now none of them will recognize anything that is plugged into them. This is for multiple devices that work on other computers, so it is not the devices, and obviously it's not the hardware if all 3 simultaneously stopped working. Googling the problem has led nowhere. Additionally, the webcam used to come up automatically in the "Camera" app; this no longer works either and it says "To get started, connect a camera." I have restored the system back to factory defaults, had all files deleted and re-did the entire initial process all over again, to no avail.
View 1 Replies View RelatedI recently purchased the Dell Vostro 3550 (2 days back) and i just figured out that only one of the 3 usb ports are working.
1 USB PORT AT BACK (USB 3) not working
1 USB PORT RIGHT (USB 3) not working
1 USB LEFT (USB 2) works
1 USB LEFT (USB 2.0/ SATA) WORKS
Why not the other. I even updated BIOS.
My product is hp pavilion g6 2320tx and im using windows 7 os in, the problem is that am not able to enable 2 usb ports out of 3(one port working normally but remaining two are not detecting any usb devices..)
View 4 Replies View Relatedi have a acer aspire 5532 laptop. well, the usb ports(both) quit working. i tried everything from doing my laptop back to factory settings, tried un-checking turn off to save power. everything i could find, i tried. im wondering is there something i can use to get some usb ports? like in the front is a multi-in-1 card reader. is there like some adapter i can plug in there, and it have like usb ports? is there anything i can do or buy? with out taking it back. i have 3 items that use usb that i no longer can use
View 7 Replies View Relatedrecently installed windows 7 on my laptop 15-n203tx
problem is my usb ports are working great in pre installed win 8.1 but now in win 7 just one port is working and it is usb port 2.0 and other two are 3.0 and not working!
A friend of mine just bought a Lenovo G580 (2189), It's currenlty running Windows 7 x64.
But I can't get the 2 USB 3.0 ports working. If I plug in a keyboard I get no power to the keyboard.
I have 2 unknown devices in Device Manager. I have installed all drivers matching my system.
Proud user of Lenovo T510.
I've had this laptop for about a year or two and all of sudden my two left usb 3.0 ports stop working, although when I first turn on my laptop, the left side works for about a second and then stops working. My right usb port which is the 2.0 one works just fine.
View 6 Replies View RelatedRecently I purchased a Lenovo IdeaPad S510p with DOS installed in it.
Then I installed Windows 7 Ultimate SP1 x64, and downloaded all Windows 7 drivers from the lenovo support website.
But the left two USB 3 ports don't detect at all. They are not working.
I've installed win7 64bit on my Ideapad S410p. The problem is 2 USB3.0 ports can't be used, only 1 USB2.0 that can be used. The driver was installed and nothing wrong. In order to use USB3.0, I need to plug in the device and then restart my laptop. I must do that every time plug to USB3.0.
View 4 Replies View RelatedAfter a fresh install of Win 7 Pro 64bit, I'm not able to get the drivers installed for the 2 3.0 USB ports on the left hand side of this laptop. I did install the chipset, which is supposed to include the drivers for those ports, as the first driver installed after the fresh install of Win 7 but it doesn’t seem to work.
View 3 Replies View RelatedI bought a Dell N5110 last month but about 2 weeks ago, the USB port to the right side stopped working completely. And just today i noticed the USB port at the back has also stopped working. I now only have the left side port working and fear that may seize to work soon.
When i go to the device manager and click on "Other devices" i have this device in list "Universal Serial Bus (USB) Controller" One of which have a yellow error icon of some sort. When i double click either of them this is the message i get:
The drivers for this device are not installed. (Code 28) &There is no driver selected for the device information set or element,To find a driver for this device, click Update Driver.