Acer Aspire E3-112-C7LY :: Couldn't Find Drivers For USB Ports
Jan 5, 2015
Aspire E3-112-C7LY. It had inside windows 8.1 64b. But it was difficult for her, so he bought a Windows 7 Home Edition. I did a disk deep delete and installed them. But... no drivers. I couldn't find drivers for USB ports and many others. How can i get a recovery disk? Because i cleaned totally the disk (delete also the recovery parition on it, been on GPT so i can install the Win7).
And now my issues: I cant find drivers for bluetooth.... USBVID_04CA&PID_2009&REV_0112 (wifi works) cant find drivers for...USB2.0 CRW .. USBVID_0BDA&PID_0129&REV_3960 and the scrolling with mousepad/touchpad (two fingers) doesn't work .... I read here i have to intall intel IO drivers but which one?! if its possible with links.
I have a problem with my wireless devices on my Hp envy 15 notebook k000nx - Windows 8.1. I have tried many ways to turn on the wireless network by reinstalling drivers from hp website and turn off the airplane mode.
Even when i use the troubleshooter it only sees the cable problem. But there is no sign of my wireless or the bluetooth they are just gone. And here is some picture for my problem ..
I'm running an Acer Aspire 5672 WLMI. Recently i upgraded my RAM and hard drive, obviously having to reinstall the OS and driver's etc. Since i made the change, i haven't been able to get the Orbicam or usb ports on the left side of my computer to work.
Luckily there are still 2 ports on the right side that work fine, and the entire rest of the computer is great, but i'd like these things to work (especially the camera). I've re-installed everything 3 times at this point with no luck. The drivers are installed and in programs the camera is listed as an optional webcam. The first time i reformatted i got and error message that said camera is currently in use and cannot be accessed. It would ding on and off repeatedly until i rebooted the computer. Currently what the camera does is basically nothing. It's detected, but when pulled up in a program (such as gmail or acer software) it's simply black. I am wondering if i maybe jostled something inside and it's disconnected or if this is a software issue.
I purchased an Aspire E5-511 about a week ago. At first, I had no problems with the USB ports and what I plugged in would be recognized and work, but now none of them will recognize anything that is plugged into them. This is for multiple devices that work on other computers, so it is not the devices, and obviously it's not the hardware if all 3 simultaneously stopped working. Googling the problem has led nowhere. Additionally, the webcam used to come up automatically in the "Camera" app; this no longer works either and it says "To get started, connect a camera." I have restored the system back to factory defaults, had all files deleted and re-did the entire initial process all over again, to no avail.
I have an Acer Aspire 5630 and the USB ports do not go off when Windows is shutdown, hibernating or when it goes into slleep (standby) mode. They only go off when I disconnect the AC power. I just bought an external USB drive as my internal is almost full, but I don't want to have the external drive on 24/7. Disconnecting the drive is a bit inconvenient as I use the laptop with an external display and keyboard and keep the laptop itself hidden behind my desk. I updated the BIOS to Ver. 3.60, but I don't see settings in the BIOS for USB ports. Can these ports be turn off programatically. Do I need a special Acer Application or drivers to turn off the USB ports? I removed all the Acer Management bloatware that came with the laptop. Are there any jumpers inside the laptop that need to be changed?
i have a acer aspire 5532 laptop. well, the usb ports(both) quit working. i tried everything from doing my laptop back to factory settings, tried un-checking turn off to save power. everything i could find, i tried. im wondering is there something i can use to get some usb ports? like in the front is a multi-in-1 card reader. is there like some adapter i can plug in there, and it have like usb ports? is there anything i can do or buy? with out taking it back. i have 3 items that use usb that i no longer can use
about three weeks ago i noticed the two usb ports on the left side of my laptop were turning devices off intermittantly but i put this down to a problem with the device in question which is a mobile broadband dongle. i then looked into this further as i have tried the device on another pc and it works flawlessly.
i have found now that these two usb ports are almost dead in that they will power a mouse but if i plug in anything else like a usb memory stick or mobile phone or camera both ports just shut off. the odd thing is that they appear active in device manager and show no problems but the devices i have plugged in do not connect to the laptop at all. i have used a set of recovery disks to reset to factory default which did not help.
now the real problem i have found is that there is no recovery partition on my laptop and after ringing acer support they seem unwilling to help with diagnosing simply saying that as the recovery partition was gone the warranty was void and there would be a charge for any repair. what if there was no recovery partition to start with!
my laptop has not been tampered with as the acer support person stated but as far as i can see it never had a recovery partition or for some reason this partition has gone as i had to get the recovery disks off a friend who has the same laptop. i used to have two partitions on my hard disk Acer(C) and Data(D) but now i just have one 74.5GB hard disk.
has anyone got any ideas on what has gone wrong with my laptop or how to get the usb ports working as the partition is not a real problem except for Acer! the tech asked me to reset to factory settings using the recovery partition but i cant so that was the end of acer's support.
I have an Acer Aspire V3-572g. My laptop came with windows 8.1 installed already. Currently, my pc is being reset to factory settings because I can not figure out how to keep the hdmi from going out after windows updates. The only way I can keep get the hdmi port to work is the factory reset it. The only way from keeping the hdmi working is by turning off windows updater. However, I'd like to figure out how to keep the hdmi working without doing so. My graphics card is Nvidia 840 M. Here are a list of things I've done after my laptop stops recognizing the hdmi.
Uninstall and reinstall the display drivers, both from intel and Nvidia Update the drivers to be up to date Downloaded intel's utility manager to keep driver update to date Downloaded factory installed drivers from Acer's website Contacting microsoft and have them remotely connect to my laptop Restored back my laptop to previous working conditions (although the hdmi never worked by going to a restore point) Swapped hdmi cords and displays
After several hours of researching and trying different things I'm stumped. I bought this computer with the sole purpose of connecting it to a TV. I've also had this issue with another laptop which I returned. This problem isn't a hardware problem as I'm connected to the same monitor with an old desktop using the same cords. I'm guessing there is a compatability issue with windows and the display drivers when there is an update.
After a while my camera stopd working now its not avalible, the windows 7 does not find the hd camera. I cant even use it on facebook or skype, I tried looking for a driver and i saw no driver for the ACER E1-731 laptop.
I cant find my bluetooth device in my (acer aspire s3 ultrabook i5 2467m 13.3) before i am using window7 it works properly but now im switch to windows8.1 and i cant find my bluetooth device even in device manager. i also used scan driver but nothing happend..
I just got a 2GB RAM for my Aspire One NAV50 but when I install it, it doesn't boot or even POST, I just get a blank black screen. Why can't I find a BIOS flash for this model? When I enter the model or SNID, the Acer website gives me nothing.
I was going to say "it won't even accept my S/N, what's on my label is less than 22 characters long (expected by the site)" but I just now (before posting this message) found I was consistently skipping a couple digits.
Acer aspire 5742. HDD crashed. I nstalled WD HDD. Booted with recovery disk. 1st screen US english next. second screen no OS in box. tried restore with image you have created earlier. could not find image. tried other recovery tool, Recovery Management. will not let me click on completely restore system to factory defaults. If I go back and click install drivers the disk has many applications and drivers. Put the old HDD back in and booted from disk. It allowed me to click on restore to default but when finished and restarted nothing. restarted wit f2 and with old drive in shows no HDD
After upgrading to Windows 8.1 x64 bit, my bluetooth is not detecting and cannot be detected by other devices (my mobile phone). In device manager, I have NO yellow triangles with exclamation marks, when I search automatically for updates, windows says everything is up to date (see picture below) so everything seems fine and running. Bluetooth is on but after searching does not find devices (even if the phone is also on bluetooth).
I just installed Windows 8 on my HDX 16 and I quickly found out the drivers for the network adapters are not installed by default. When I go to HP's website, there are no drivers for Windows 8, just Windows 7. When I tried installing windows 7 drivers, it told me it was the wrong verson. That was for the Ethernet port. For my wifi, it's telling me I need to have .net framework 2.0 or higher, and won't let me install that driver. After making sure I installed the latest version, it still doesn't detect that I have the latest .net.
I have a M1730 and was looking for some drivers which I cant find out. My laptop is still in warranty so I talked with a representative. He/she found me the drivers and now I am being charged for that saying its dell on call service. I had a chat using Contact Technical Support and now I have a due.
I recently reinstalled windows 7 (64 bit) on my pavilion dv6-6135dx.Problem is the system can't find drivers for the PCI device, SM Bus Controller, and two USB controllers. The yellow exclamation sign shows up next to them in device manager.Out of the 4 USB ports I have, only the two on the right side work.