Acer :: Aspire 5935G - Power Smart Button Is Not Working (cannot Find Drivers / Application To Make It Work)
Sep 23, 2009
I recently formatted my Acer Aspire 5935G and downloaded and installed all drivers from the Acer website. I currently am experiencing the following probs:
1. The Acer PowerSmart Button is not working (cannot find drivers / application to make it work)
2. Cannot switch from the onboard video card (Intel) and the "discrete" one which is an ATI Radeon Mobility 4570 HD
Wonder if anyone has upgraded to windows 7 x64 Home Premium and got the powersmart key working on this model? I have downloaded and installed the powersmart manager from the acer website but it has made no difference.
I know that in the power options you can change what pressing the power button does, but "lock" isn't an option. Before I upgraded to Windows7, I discovered how to set this but I can't figure out how to do it anymore.
A few days ago I was bought a new Acer Aspire 5935G-744G50N notebook. I would like to install the original nvidia 185.85 WHQL driver for the GT130M video card from the nvidia site. But the installer drop down me and doesn't installed the driver.
He says: "Doesn't found components for the driver". Or something like that. Okay, I install back the original Acer-Nvidia driver from the driver backup dvd, but the screen brightness is too dark. I repaired the system with the system-restore. I delete again the originally installed Acer-Nvidia driver, and I download a modded .inf with nvidia driver from the laptopvideo2go.com. That's generate a bad screen resulation and after some installs black sreens. After it, I download a "Dox" modded driver from here, too, but it doesn't work correctly, too.
My question is: How I install newest Nvidia drivers for this good laptop?
And now my issues: I cant find drivers for bluetooth.... USBVID_04CA&PID_2009&REV_0112 (wifi works) cant find drivers for...USB2.0 CRW .. USBVID_0BDA&PID_0129&REV_3960 and the scrolling with mousepad/touchpad (two fingers) doesn't work .... I read here i have to intall intel IO drivers but which one?! if its possible with links.
Aspire E3-112-C7LY. It had inside windows 8.1 64b. But it was difficult for her, so he bought a Windows 7 Home Edition. I did a disk deep delete and installed them. But... no drivers. I couldn't find drivers for USB ports and many others. How can i get a recovery disk? Because i cleaned totally the disk (delete also the recovery parition on it, been on GPT so i can install the Win7).
I currently have a Acer Aspire V3 Laptop that runs on the most current version of Windows 8. Ran perfectly fine last night without any kind of problems. Went to get on it this morning and the power button won't respond. When it is plugged in, the LED light shows that it's charging, but when I try to turn it on, the power button doesn't respond. Every few presses, the power button lights up for a split second, then turns off. The screen never responds to the power button being on for a split second.
I own an Acer Aspire v5-572P-6858 laptop. I was using it last night and it worked perfectly fine. I turned it off and set it aside for the next day. Today I woke up and tried to turn on my laptop but nothing happened. Pressing the power button gets no result. The battery is charged as well. What do I do?
I have an ACER Aspire 5542g and i've had a problem with it lately, when I turn it on, the fan starts running, the harddrive turns on, and the CD drive starts up, the power button LED is on, but all that shows up is a black screen. I have tried the "Take out the charger and battery, hold the power button for 30 seconds", tried switching the RAM, tried taking out the harddrive, and all have been a fail. And I am honestly confused, because some of the time (rarely) it will turn on, and literally everything about the laptop is perfectly fine, and its like nothing happened. Until you turn it off.
I have an Aspire V5-572P-6454. Occasionally I accidentally hit the power button on the side of the computer and it makes my screen go black. I can't figure out how to get me screen back, thought it was a lighting issue and tried Fn and the left and right arrows, but that doesn't work. Usually end up rebooting and losing what I've been working on.
I have a Problem with the Acer Powersave mode. When I switch on the power save mode, the brithness decrease to 30% I can change the brightness but after restart the value is 30% again. Anyone knows how to change the brithness default value in power save mode?
i have acer aspire 5738G witho windows windows vista i upgrade OS to windows 7 and every think ok but my problem with acer powr smart manager didnot work when i press the button not work and lamp not light and not work and open launch manager and i select power smart manager.exe but no change... i have acer upgrade kit and i try install drivers and app but no change
I bought one for a customer, and it's been a nightmare. I've done all of the suggestions and ended up taking it to an authorized repair facility. They "reset" it and said it was fixed. Of course it was not. Acer has to provide a fix as it is their product that does not function correctly.
I have an Acer Aspire V3-772g, a relatively new laptop (8 months old), which randomly decided to stop booting.
Windows 8.1Core i7 2.2ghznVidia GTX 760m8gig's of ram (2x4gb)7200 RPM SATA
Was playing a game just fine. Shut down as normal, went to work, came home 8 hours later, attempted to boot - nothing.
Exact problem: Hit power button, power button comes on. Light next to the lightbulb (power light?) Comes on, stays solid. Charging stays solid orange/blue.
HDD light? Flickers. Screen flickers a dark grey color that may be the very initial part of a startup. No acer logo.The screen and HDD light flicker in synchronisation, at the same exact time. You can hear the fans fire up, and the HDD spin up. Screen just flickers about once per second (it's very faint.)
--Heres what I've tried---
-Removing power cord/battery, holding button for 60 seconds 3 times, plugging back in and powering up. - Almost every varation of that, I have attempted. -Inserting a new harddrive. Same result. -Plugging in an external monitor. (Tried VGA and HDMI) - Power does not transfer to external monitors. Screen still flickers on laptop, no change in behavior. -Removed 1 stick of RAM - No **BUT** behavior changes slightly. Flickering of screen and HD light reduced to about once every 45 seconds rather than once every second. -Removed both sticks of RAM - no flickering, no HDD light flickering. Pure black screen. -Rotated the sticks of RAM - No change.
Also interestingly, with everything normal, if I hold Fn+Esc, the computer will do a new startup process (Screen still black), then after about 20 seconds goes into the normal screen flickering/HDD indicator flickering. Different behavior, slightly.
I have very recently bought an Acer laptop, and tried to load my old Chamionship Manager 2001 game which i used often on my old laptop. Anyway, the game says that i don't have enough memory to run it on the laptop (definitely not true unless the laptop is lying about its memory)) but I did notice when it was laoding it said it needed DirectX and I should install a service pack (didn't get this with the laptop). Just been looking and it says Windows 7, which I have, has DirectX incorporated into it, is this true? Should I be downnloading DirectX to make my game work?
I bought an Inspiron 15 3542 laptop and it works fine; the Power button has an LED which never lights up; also, the system LED at the right bottom (front of the laptop), does not light up all the time. It only lights up in white when I start the laptop from sleep or shutdown. Is this a design flaw or is something wrong with the laptop? I have never seen the Power button LED light up, which is annoying since the keyboard area is always dark without any lights; I have a HP Pavilion which has many blue LEDs on the surface and front of the laptop, so I find it weird not to have any lights on the Dell.
I have a new Acer Aspire 5315 Notebook, I've only had it about a month, and just a few days ago when I tried to plug in, as the batter was about to die, it wouldn't register that I was plugging it into the AC adapter. I can't get it to charge at all. I did notice that the small LED on the box on the AC adapter was coming on, so I know it's getting power, it just won't take power to the notebook, could someone tell me if there's a way to check if it's the adapter that's the problem?
It is still under warranty, so I called Acer support, and the guy wouldn't listen to me, he kept interrupting me just saying they'd send a new adapter. I just want to be sure that's the problem.
I have purchased hp pavilion d107tx with DOS and now I am unable to find Network Controller Drivers because of which I am unable to use Wi-fi on my laptop. How to find the right drivers for my laptop.
I have a 5738z and upgraded to windows 7. I had to do a clean install as I upgraded to x64 Win7 from x86 vista to use the 4gb of RAM the machine has. The upgrade went fine, no problems. All drivers installed fine and the machine runs great. My problem is that the ePower button will not work no matter what I try (it's the P button on other models) and it wont light up green. I've used the Acer upgrade disk, which installed the launch manager software, but the button still wont work.
New 2nd generation vostro 3550 laptop fingerprint reader driver software is available in dell online but there is no application software for fingerprint reader without any application how will I use it?
There's a little quirky behavior that's bugged me a little bit ever since I started using Snow Leopard last summer.
Whenever I minimize or close an application using either the yellow/red buttons on the application or simply hitting CMD+M / CMD+W, the menubar for that application persists, necessitating a click on whatever application behind it before that app is actually "active".
For instance, if I were to hit CMD+W on Firefox right now, iTunes would be staring me in the face, but the menubar would still be for Firefox -- and I'd have to click on iTunes before being able to play something.
Is there any config setting or some way to make the menubar minimize/close with the application I'm minimizing or closing?
