i have acer aspire 5738G witho windows windows vista i upgrade OS to windows 7 and every think ok but my problem with acer powr smart manager didnot work when i press the button not work and lamp not light and not work and open launch manager and i select power smart manager.exe but no change... i have acer upgrade kit and i try install drivers and app but no change
Wonder if anyone has upgraded to windows 7 x64 Home Premium and got the powersmart key working on this model? I have downloaded and installed the powersmart manager from the acer website but it has made no difference.
I have a Problem with the Acer Powersave mode. When I switch on the power save mode, the brithness decrease to 30% I can change the brightness but after restart the value is 30% again. Anyone knows how to change the brithness default value in power save mode?
I recently formatted my Acer Aspire 5935G and downloaded and installed all drivers from the Acer website. I currently am experiencing the following probs:
1. The Acer PowerSmart Button is not working (cannot find drivers / application to make it work)
2. Cannot switch from the onboard video card (Intel) and the "discrete" one which is an ATI Radeon Mobility 4570 HD
My original hard drive of Acer aspire 5738G crashed and I bought a new 1 TB WD hard drive. I tried to reinstall Windows 7 from recovery disk. All data copy and system restoration (from 3 restoration disks) completed successfully. But after the auto reboot, during “Setup is applying system settings” stage I encountered error message “Windows Setup could not configure Windows to run this computer’s hardware”. I tried reinstalling the OS multiple times but every time I am getting the same error. Before replacing my hard drive, I was using Windows 7 Home Premium OEM version and now I was trying to restore the same in my system.
I have acer 5738G with ati mobility 4570 512mb GDDR3
The problem is ati 4570 mobility by default has memory speed of 800MHz but ati catalyst on me laptop shows memry speed of 500 mhz only i tried GPU-Z it also shows defalut clock 800mhz but current 500 mhz and message that current low speed is for low power consumption.
i want to know how can i increase it back to 800 mhz and will there be any heating problems at higher memory clock...
I am intending to buy acer aspire 5738G next friday. But I cannot find any valuable reviews on the net . I am concerned about it build and durability. the specs are fine. can any one tell me is it strongly built and durable or not. I hear a lot about the acer screen damage and other stuff.
I bought an acer aspire 5738G a couple of days ago with windows 7 x64 installed ,catalyst 9.9. When playing any game or using any 3D demanding application both my GPU temp. jumps up to 85-95 degrees C, and the CPU to 75-85 degrees C. according to GPU-Z my fan speed is always at 30% no matter how hot the lappy gets. I also wanna mention I didn't OC or use any modded stuff yet.
My questions are:
-Are these normal temps since this is my first acer and my previous lappy which wasn't an acer with a Nvidia Geforce GO7900 never got past the 75 degrees barrier
- Is there something wrong with the fan or it is supposed to kick in only at critical heat point
Does anyone happen to find an ati GFX driver from acer that is opencl compatible and works on HD4570 because the 5738G driver doesn't have opencl support
When I power on, after about 5-6 minutes the fan (I assume the CPU fan) kicks in. However, it then seems to remain on constantly until the laptop is turned off, even if I'm only idling. This is slightly annoying, not just because of the noise, but also it seems to have quite a noticeable effect on the battery life.
I have installed SpeedFan to keep track of the CPU temp and it seems that the fan kicks in initally when the core temps reach about 35 C, but then the fan does not switch off, even when temps drop back down to 25/26 C, which seems very cool.
On every other laptop I have used (none of which were Acers), the CPU fan only comes on now and again, as and when it is needed.
So, is this normal behaviour or is there possibly a fault with the fan control mechanism ? If so I will consider taking back to the retailer for an exchange.
my laptop overheating problems ever since I bought it, I almost tried everything ..... but alas nothing worked the final straw im hanging on is to downgrade my bios to the utterly old version 1.13 which is the last known stable & heat friendly version which is not on Acer website anymore .... So I was wondering if anyone has the windows 7 x64 executable bios 1.13 for aspire 5738G on their laptop
I bought my Acer Aspire 5738G laptop last november and this month I experienced for the first time my laptop shutting down by itself while playing cs-source.
The laptop is quite hot and upon searching the net found out that it's most likely due to overheating.
My question is about the ventilation at the bottom of 5738G.
Is it supposedly closed? No holes/slots? Cause I think it's the cause of overheating.
The system doesn't have a way to take-in air
It's like it was designed to be a bottom vent for air intake but then forgot to make holes in it.
I also searched for it's manual and confirmed that it is a ventilation slot.
It even says there "do not cover or obstruct the opening of the fan".
(I've got a screen shot attached. I'm talking about part 6. That part of my laptop doesn't have holes/slots but clearly there should be according to the manual.
I have bought the Aspire 5738G over half a year ago and it was just a couple of days back from now, when Everest showed me a hardware report about an integrated Intel 4500MHD onboard, which is inactive.
I couldn't find any info on this matter online, so I thought that with your help and my readiness to disassemble my laptop, we could figure out a way to make use of this integrated chip, which would result in serious power savings when running on battery.
I am thinking that maybe there is some place in the circuitry that was cut in order to disable the chip or something, or that it has no access to the LCD and HDMI ports.
Also, I downloaded a Service Manual for my model and I couldn't find my 5738G specification in it.
I'm in the process of upgrading my L521X/XPS 15 to Windows 8. The A09 BIOS introduced UEFI booting, which I of course intend to use. However, I can't get Windows installed when Smart Response is activated in the BIOS. The installer simply doesn't show any disks - even when loading the correct drivers. Changing to AHCI allows me to install - but of course without the benefit of Smart Response. Now, the question is: is it possible to use pure UEFI and Intel Smart Response Technology on the L521X?
I am having issues connecting the Acer Travelmate P243 to a Smart Board, but will project through a projector. The acer and SMART smartboard can't seem to read each other.
I just received my 1410 last week and I'm absolutely thrilled with it! It runs so much faster, has better battery life and better build quality, than my HP Mini 311. I had some spare time this past weekend, so I installed another copy of Win 7 on it and it's now a dual-booter. I have re-installed most of the Acer software - but I cannot find a way to re-install the green Acer welcome screen.
I have an Aspire 6930 that suddenly died and will not power on. The LED power button was dark and unresponsive. I performed a power reset and the blue light on the power button came back on until I pressed the button to try to restart the laptop. When I did that, the blue LED immediately went dark and stayed that way until I did another power reset. It never gets to the point of anything powering on. Is it a problem with the battery or it the laptop toast?
This is a real bummer since I just replaced the hard drive a few weeks ago and replaced Windows Vista with Linux Mint (which btw is blazing fast compared to Vista).
Acer 5253 - Will not power on, battery or on AC power. Have tried all the suggested solutions but none have worked. Is it possible to get maintenace instructions (disassembly, where certain items are located, etc)?
I have a Sony Vaio Z which I use it in my home(DHCP) and office(STATIC) wherein both sites are using Wifi.
The problem is Vaio Smart Network is not smart enough to automatically switch in different wifi access. It always says the I need to create a profile wherein there is already profiles created for both my home and office wifi access. I always need to open the vaio smart network utility and select the profile and switch to it and sometimes it doesn't work at all!
I ran the Lenovo Solution Center Harddisk test on my Thinkpad R61 (8918DFG) laptop and got a warning regarding the "SMART short self-test" with the result code: WHD01V000-QIHW7J.
The "SMART drive self-test" was Not Available. The other HDD tests went OK.
Reinstalled Windows 7 on Precision M6500. Smart Card Reader does not respond. My SDHC card is recognized on my other Dell Laptop. What can I do to fix this?