Acer :: 5738G GFX Opencl Driver
Jan 17, 2010Does anyone happen to find an ati GFX driver from acer that is opencl compatible and works on HD4570 because the 5738G driver doesn't have opencl support
View 4 RepliesDoes anyone happen to find an ati GFX driver from acer that is opencl compatible and works on HD4570 because the 5738G driver doesn't have opencl support
View 4 RepliesI have acer 5738G with ati mobility 4570 512mb GDDR3
The problem is
ati 4570 mobility by default has memory speed of 800MHz but ati catalyst on me laptop shows memry speed of 500 mhz only i tried GPU-Z it also shows defalut clock 800mhz but current 500 mhz and message that current low speed is for low power consumption.
i want to know how can i increase it back to 800 mhz and will there be any heating problems at higher memory clock...
i cannot find drivers for windows 7 for ati radeon hd 4570 512mb for my acer 5738g....
View 6 Replies View RelatedI am intending to buy acer aspire 5738G next friday. But I cannot find any valuable reviews on the net . I am concerned about it build and durability. the specs are fine. can any one tell me is it strongly built and durable or not. I hear a lot about the acer screen damage and other stuff.
View 10 Replies View RelatedI bought an acer aspire 5738G a couple of days ago with windows 7 x64 installed ,catalyst 9.9. When playing any game or using any 3D demanding application both my GPU temp. jumps up to 85-95 degrees C, and the CPU to 75-85 degrees C. according to GPU-Z my fan speed is always at 30% no matter how hot the lappy gets. I also wanna mention I didn't OC or use any modded stuff yet.
My questions are:
-Are these normal temps since this is my first acer and my previous lappy which wasn't an acer with a Nvidia Geforce GO7900 never got past the 75 degrees barrier
- Is there something wrong with the fan or it is supposed to kick in only at critical heat point
i have acer 5738G comming with windows vista where can i download or buy windows 7 recovery and drivers & app dvd
View 5 Replies View Relatedi have acer aspire 5738G witho windows windows vista i upgrade OS to windows 7 and every think ok but my problem with acer powr smart manager didnot work when i press the button not work and lamp not light and not work and open launch manager and i select power smart manager.exe but no change... i have acer upgrade kit and i try install drivers and app but no change
View 6 Replies View RelatedWhen I power on, after about 5-6 minutes the fan (I assume the CPU fan) kicks in. However, it then seems to remain on constantly until the laptop is turned off, even if I'm only idling. This is slightly annoying, not just because of the noise, but also it seems to have quite a noticeable effect on the battery life.
I have installed SpeedFan to keep track of the CPU temp and it seems that the fan kicks in initally when the core temps reach about 35 C, but then the fan does not switch off, even when temps drop back down to 25/26 C, which seems very cool.
On every other laptop I have used (none of which were Acers), the CPU fan only comes on now and again, as and when it is needed.
So, is this normal behaviour or is there possibly a fault with the fan control mechanism ? If so I will consider taking back to the retailer for an exchange.
my laptop overheating problems ever since I bought it, I almost tried everything ..... but alas nothing worked the final straw im hanging on is to downgrade my bios to the utterly old version 1.13 which is the last known stable & heat friendly version which is not on Acer website anymore .... So I was wondering if anyone has the windows 7 x64 executable bios 1.13 for aspire 5738G on their laptop
View 9 Replies View Relatedgive me review on acer aspire 4736,5738G,5739G.
View 5 Replies View RelatedI bought my Acer Aspire 5738G laptop last november and this month I experienced for the first time my laptop shutting down by itself while playing cs-source.
The laptop is quite hot and upon searching the net found out that it's most likely due to overheating.
My question is about the ventilation at the bottom of 5738G.
Is it supposedly closed? No holes/slots? Cause I think it's the cause of overheating.
The system doesn't have a way to take-in air
It's like it was designed to be a bottom vent for air intake but then forgot to make holes in it.
I also searched for it's manual and confirmed that it is a ventilation slot.
It even says there "do not cover or obstruct the opening of the fan".
(I've got a screen shot attached. I'm talking about part 6. That part of my laptop doesn't have holes/slots but clearly there should be according to the manual.
I have bought the Aspire 5738G over half a year ago and it was just a couple of days back from now, when Everest showed me a hardware report about an integrated Intel 4500MHD onboard, which is inactive.
I couldn't find any info on this matter online, so I thought that with your help and my readiness to disassemble my laptop, we could figure out a way to make use of this integrated chip, which would result in serious power savings when running on battery.
I am thinking that maybe there is some place in the circuitry that was cut in order to disable the chip or something, or that it has no access to the LCD and HDMI ports.
Also, I downloaded a Service Manual for my model and I couldn't find my 5738G specification in it.
[url]
If you check Apple's Snow Leopards specs the following GPUs are supported for OpenCL and h.264:
Quote:
QuickTime H.264 hardware acceleration
requires a Mac with a NVIDIA 9400M graphics processor.
OpenCL
NVIDIA Geforce 8600M GT, GeForce 8800 GT, GeForce 8800 GTS, Geforce 9400M, GeForce 9600M GT, GeForce GT 120, GeForce GT 130.
ATI Radeon 4850, Radeon 4870
The most glaring omission for OpenCL is for desktops with ATI GPUs, namely the HD 2400XT, HD 2600Pro, HD2600XT, and HD3870. Now it's not like these GPUs can't support GPGPU operation since they already do so in Windows under ATI's own CTM and Brook+ language.
ATI's OpenCL drivers for Windows should be available soon, they were promised for H1, and if it turns out the HD2xxx and HD3xxx series is capable of supporting OpenCL but only in Windows and not OS X it'd be very disappointing. Somehow I don't think Apple envisions iMac users having to use Boot Camp to use OpenCL accelerated apps.............
My original hard drive of Acer aspire 5738G crashed and I bought a new 1 TB WD hard drive. I tried to reinstall Windows 7 from recovery disk. All data copy and system restoration (from 3 restoration disks) completed successfully. But after the auto reboot, during “Setup is applying system settings” stage I encountered error message “Windows Setup could not configure Windows to run this computer’s hardware”. I tried reinstalling the OS multiple times but every time I am getting the same error. Before replacing my hard drive, I was using Windows 7 Home Premium OEM version and now I was trying to restore the same in my system.
View 8 Replies View RelatedHave done a clean install of VISTA HP. Keep being prompted to install driver for "Mass storage controller". Device manager shows it with yellow exclamation mark. Windows cannot locate a driver. Looked on the Acer site but unsure what to install for this one.
Device manager just calls it "other device" Acer Aspire 9301awsmi.
I just installed XP Pro on my Acer Extensa 4630Z and I installed all the drivers successfully but the wireless driver. I tried all the drivers from acer's support site [url] none of them work. I also tried what worked for Davoucci with same laptop but this driver also doesn't work for me
View 10 Replies View Relatedi bought a ACER AS6530G-804G64MN and it supports 1080p (full hd 1080p playback) but my desktop resolution can be maximum at 1366x768.. is it ok or is it a driver problem should i force it to 1920*1080 ?
View 10 Replies View Relatedi reformated my acer 5100 from vista to xp..i want to know whats the latest driver for ar5005g that will connect to wpa2 becuase i downloaded one before and it only worked with wep
View 8 Replies View RelatedI am thinking to add XP to my TL.
I kinda tried drivers from acer.com but some did not work.
Anybody successfully installed XP on thier TL?
I want to stop using my wireless connection on my laptop and plug an ethernet lead in.
But when I plug this lead in my laptop just stays connected to to my wireless network. I tried disabling the Wireless on my computer then putting the lead in but still it wont attempt to connect to the internet with the ethernet lead in. What driver do I need to download so it will recognize the lead is in the laptop and attempt to connect to the internet?
I have an ACER 5610/Z
What is the newest driver for this card? I went to ati's website and downloaded under vista 32 bit integrated/motherboard x1250 and i don't think it is for my laptop;. Did i screw up my video card by downloading this? Do I need to uninstall it?
View 6 Replies View RelatedI had to reinstall windows vista on my computer because att communication manager messed my computer up...
Now that i have the new windows vista i dont have the drivers and i cant seem to find them...
i believe my nvidia is somewhat a bit twweaked by acer so it performs with the laptop,anyways what driver you use for yours, my driver is horrible and yes its new...i need a good one gaming, no overclocks cause it heats my laptop up causeing lag...if yo do say a driver number pelase give me a link also [url]
View 10 Replies View RelatedI have a new Aspire 8935G with Vista 32 preinstalled.
Take audio drivers for example.
Acer update site reports Realtek audio driver version 6.0.1.5847 for my system.
If I switch to Seven 32, it reports 6.0.1.5915.
If I look for Aspire 8940G, Vista 32 (same audio hardware as mine), I see 6.0.1.5918, and, finally, 8940G Seven 32 has 6.0.1.5930.
They are all different from official Realteak drivers: they are at version 2.39 and lacks a control panel element (from Realtek...) that is present in the Acer divers, the one with the desk picture and the speakers around the room.
First question is: does Acer ever update drivers for different system or they just offer the drivers that were present in the retailed system?
Second: how comes the Realtek drivers lack the control panel component?
My Acer 1810T has Windows 7 Home Premium x64 installed and it is using a Microsoft Webcam driver version 6.1.7600.16385 dated 6/21/2006.
On Acer's site, they list 3 Camera drivers for Windows 7 Home Premium x64:
Chicony - 1.1.95.71
liteon - 0.905
Suyin - 5.2.7.1
I've been looking for hours for a LAN driver for this laptop...my wifi works perfect via the Intel Software from the acer website. But the usa/european site doesn't have the LAN driver. I lost the original CD.
View 6 Replies View RelatedI have a acer 6920G Gemstone, I have installed windows 7 beta but cannot get the touch panel or the empowering technologies button to work at all.
View 10 Replies View Relatedwhat is the best driver for the 8600M GT?
View 7 Replies View RelatedI bought Acer aspire 4720z yesterday and it's come with Vista home but i don't like it.
I want download XP but i don't have XP driver.
If someone know where i can find it tell me and i will download it all.
How I know If my laptop support SATA drive?
i recently installed WinXP on my Acer 5930G (went from vista). i managed to find all the drivers (including the ICH9M SATA ACHI-mode driver) except one called the SM Bus Controller which is showing up in device manager with a little yellow ! symbol. Does anyone know where I can find this driver? the Intel website and their chipset identifier tool seems to be quite useless. The chipset identifier can't identify anything except the I/O controller (82801MB ICH9M SATA AHCI-mode) which was installed from the '32-bit floppy configuration files'
5930G Specs:
C2D P7350
3GB RAM
Geforce 9600M GT
Intel 965 Express (i think)
does anyone know which SM Bus Controller driver i need for XP?