New 2nd generation vostro 3550 laptop fingerprint reader driver software is available in dell online but there is no application software for fingerprint reader without any application how will I use it?
View 5 RepliesBecause of a virus, I recently had to reinstall Windows 7 Professional 64-bit. I have gotten everything else working except the fingerprint reader.I have installed the Validity Fingerprint Reader driver from the Dell Support site. The fingerprint reader shows up in the Device Manager. However, the Biometric Devices applet doesn't appear in the Control Panel.
I tried letting Windows update detect the fingerprint reader. It installed a driver for a Synaptics device. This was enough to get the Biometric Devices applet to appear in the Control Panel. However, when I tried to configure the fingerprint reader, I got an error saying no fingerprint management software was installed. I have seen lots of posts online directing me to validityinc.com for drivers or the DigitalPersona software, but Validity Inc. seems to have gone out of business. The DigitalPersona software is available on the Dell Support site for my service tag.
I have even tried installing the Windows 8 Validity Sensor Driver for my laptop, but though it successfully installs, it produces the same results.
There's a little quirky behavior that's bugged me a little bit ever since I started using Snow Leopard last summer.
Whenever I minimize or close an application using either the yellow/red buttons on the application or simply hitting CMD+M / CMD+W, the menubar for that application persists, necessitating a click on whatever application behind it before that app is actually "active".
For instance, if I were to hit CMD+W on Firefox right now, iTunes would be staring me in the face, but the menubar would still be for Firefox -- and I'd have to click on iTunes before being able to play something.
Is there any config setting or some way to make the menubar minimize/close with the application I'm minimizing or closing?
Problem:1
I have recently purchased Vostro 3550 with Finger Print reader. After i updating all drivers and checked in dell diagnostic also. Nothing happen to no response for my reader. I purchased 07-05-02012.It haven't worked while i purchased itself and i updated all drivers
Problem :2
ST MICRO SCREEN DETECTION SENSOR ISN'T COMPATIBLE WITH THIS VERSION OF WINDOWS - ? Wat i need to do for this???????????
I have checked through installing Free fall data protection. it shows nothing.
I need webcam driver and digital persona finger reader driver for vostro 3550 window 7 64bit. i could not find these driver.
View 7 Replies View RelatedI was wondering if it would be at all possible to add the fingerprint reader after purchasing the laptop?
I have the laptop in my sig and it doesnt have the fingerprint reader, and i now have a need for it
I have managed to find the following on ebay:
http://cgi.ebay.co.uk/DELL-0j448c-J448C-VOSTRO-1510-PALMREST-MOUSEPAD-F182_W0QQitemZ380130791881QQcmdZViewItemQQptZUK_Computing_ComputerComponents_KeyboardsMice?hash=item58818f91c9&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1690|240%3A1318|301%3A0|293%3A3|294%3A50
I got my AS5 today and the ArctiClean 1+2 stuff should be here in a few days. So I decided to check where I should be putting this stuff.
Am I supposed to remove the whole of the black square? It felt like a sticker which started to peel off. Or is it just the silver stuff which will be removed and then replaced with the AS5?
Looked like there was a bit of black stuff on the CPU as well? Also, should I place the AS5 only where the silver stuff is on the picture or shall I go wider/longer than that?
And finally, what is this blue sticky thing which goes onto a chip in the top right of the pic? Do I remove that and what is the chip for?
I have purchased a new laptop (Vostro 3560) with Windows 8 64 Bit. The fingerprint reader stops working, after reinstalling the touchpad and fingerprint reader sometimes the reader starts working again (i.e its detected and I can login to windows by swiping my finger). It says the fingerprint reader is not found (on the Windows Login Screen) and the icon in the DP Fingerprint Software has an x in a red circle.
View 2 Replies View RelatedI just bought a Dell Vostro 3400, and i am having a nightmare with this Fingerprint Reader. I tried installing the Digital Persona Fingerprint Reader [URL] .... and it worked, but the program kept telling me that there was no Fingerprint reader detected. Then i tried to uninstall and reinstall the program, but when I did, the program said that a previous version was not found to update, so it couldn't be installed. I don't have a recovery CD either.
View 5 Replies View RelatedAsked this question in the other thread but I thought I make a new one here.
I formated and reinstalled my e6500.
Now I saw before the reinstallation that I had a dell program that connected to their website (database) and checked if all my drivers where up to date.
Now after reinstallation I dont find this neat application any of you who know whats it called?
I installed Windows 8 on my Vostro 3560 and even installing the new driver for Win8 video card AMD HD 7670 Randeon the note presents several bugs this board, such as:* apps made for Win8 (with technology underground) not roam well with AMD board, where they are fighting or simply leave the slow note.* The computer now does not go into an idle state automatically after the time set in the Power Options, due to various errors that prevent this driver please note the suspended state.* The fingerprint reader no longer works at the log on screen or lock Windows 8. The reader only works when I'm on the desktop or on the start screen, also due to a problem with the video card drivers because it is causing several incompatiblidades system.All these mistakes I vii event log windows.Have I contacted AMD who said that Dell is to update the driver for the notebook has two cards (intel and AMD) and fits Dell make changes and corrections.And then Dell??
View 10 Replies View RelatedI don't own a Mac, but I've used them. One of the things that has always bothered me about them is the way applications launch. Specifically, they always seem to launch in their own un-maximized window. The yellow button doesn't always fully maximize the application and one has to drag the window into full screen and even then the front row thingy blocks the window from fully maximizing.
Is there a simple way to fully maximize an application on a Mac? Is there a setting that will make it so that all apps automatically launch maximized?
i have the aluminium body mac book and i use bootcamp ( with windows 7) Is there any application to take pictures using the built in webcam (something like photobooth for mac)
View 5 Replies View RelatedMS Word application crashed a couple of minutes ago, not too bad as I only edited my thesis marginally, but I used a picture for the first page that I cannot find on the internet again.
View 3 Replies View RelatedWhat is the method to automatically launch an application when the user logs in. Does it involve putting an alias of the app in some specific "startup" folder, like in Windows?
I am trying to install an older scanner driver on my new MBP, which I was only partially able to do. The "button manager" app, would not install automatically using the installer app. Hence, in order for the buttons on the scanner to work, I have to first manually launch the Button Manager. On my older MB, it would launch at login, so it was resident at all times. I none such difficulty installing the same driver package on the old MB.
I find it odd that my new MB has so many quirks that my 1 year old MB unibody does not. They are running exactly the same OS version. Hmm And Migration Assitant left a boatload of stuff (such as this), unmoved.
Yesterday I plugged in an HDMI cable to output to a Toshiba tv. After unplugging the cable I no longer have sound on my HP Envy 17 Notebook (this notebook has Beats Audio). The product # is EOK85UA#ABA.
View 3 Replies View RelatedI tried to install the Dell System Detect application but I couldn't because of this error;Unable to install or run this application. This application requires Version 4.0 Full or other compatible .NET Framework..Where do I get this framework version?
View 2 Replies View RelatedJust bought this laptop. Upon booting up got a Rapid Start error Message. Uninstalled the Rapid Start Driver and downloaded the latest Rapid Start Intel driver from Dell Downloads. Upon trying to install it, I get the following message:
"This computer does not meet the minimum requirments for installing this software"
Intel Rapid Storage is working. I checked the BIOS and Intel Rapid Response is enabled.
Recently done a clean install of W7 so lost most of my acer applications (god is it hard to find them) and was having trouble finding the Crystal eye programme. Does anyone have any knowledge of where i could find a version that works with my model (6930g, W7 home prem 32) and will record video, the version i installed when i got w7 only let me take pictures?
View 6 Replies View RelatedHopefully it will go through in a few days. I'm waiting pretty anxiously.
View 5 Replies View RelatedI was on mesenger for mac earlier when it froze with the spinning beach ball mouse and i had to force quite the application, is this a sign of hardware failior some how, or is it just a poorly coded program? i have never had an application freeze befor in the past 8 years of having macs
View 7 Replies View RelatedProduct name: HP ENVY m6 Notebook PC
Product number: D1E93UA#ABA
Â
I have uninstalled/re-installed the driver, rebooted, and still no sound. Â When I right-click Speakers/HP, and Test - the pop-up says Device in Use. Â There are no legit applications using the device. Â I have been running Windows Defender since I used the official HP Recovery Discs I ordered. Â I have not visited questionable websites, yet, it looks like I have malware? Â
I have Dell Inspiron 5447 i3 with AMD Radeon R7 M265 with Windows 8.1 and have recently updated all needed windows updates.
I know how to add applications in the switchable settings as high-performace with *.exe extension but when I installed applications from the apps store (i.e. Asphalt 8 - Airborne, etc.) I cannot seem to add them to the switchable graphis settings to get the AMD GPU used. I know that the AMD GPU not getting used because I used a monitoring tool (openhardwaremonitor) that says it was not used. I can add applications like some other games I installed but not from the windows apps store so now I am really confused.Â
How can I get the AMD graphics to work with some apps in the apps store (specifically in my case, Asphalt)
if anyone can recommend a firewall application that controls both the incoming and the outgoing traffic. The built in firewall protects from incoming request, but I'd like to control the outgoing connections as well. I did a search and found 1 thread, but it's more than a year old.
Little Snitch and WaterRoof (and its simpler version NoobProof) seem to fit the bill. Any recommendation besides these?
Every time I open one of the Lenovo apps like like Support or Companion, I get the message "Enhanced functions for this application are available". Â I click the message, a browser opens up, I download "dependecypackage.exe", I install, setup asks for a restart and I let it, and the process repeats again and again. Â I keep getting this "Enhanced functions..." message. Â It is driving me crazy. Â How do I end this cycle?
Â
T440s
i5-4300U
4GB RAM
256GB SSD
Factory Win 8 upgraded to Win 8.1
I've uninstalled and reinstalled drivers for the camera. It does not work in any application.
Â
I've seen a few threads about this but not 100% if there's been a resolution...
Â
running 8.1 windowsÂ
1. Advise a downloader(on Vista pc i use Flashget and enjoy it), Speed Download is shareware+interface is not too friendly. some pals recomended:
iGetter, Leech, Download Queue, Download Wizard, and Download Manager, but which one to choose, which is better ?
2. Which application delete program would you suggest:
à) AppZapper
b) CleanApp
c) AppDelete
3. need a prog. for .RAR files ( not Stuffit, cos it has unfriendly interface for me, imho), which is better:
Unrar X,
Simply Rar
UnArchiver
My T530 (a month old) is driving me crazy with this issue: Depending on which application is in the foreground, it will dim/undim the built-in screen (1600x900 version). I have turned off adaptive screen brightness in the power options, and I've turned off Film Mode Detection and Adaptive Contrast Enhancement in the Intel Graphics and Media Control Panel, but this "feature" won't go away.
Â
How in the world can I get the screen to be on 100% brightness, unless I manually change it?
This message came with a Microsoft update in about April 2014. I am running:
HP ENVY m6 Notebook PCÂ Â Â
Product Name D5F64PA#ABG
Windows 8.1 64-bitÂ
Intel(R) HD Graphics 4000 and AMD Radeon HD 7600M Series
I recently formatted my Acer Aspire 5935G and downloaded and installed all drivers from the Acer website. I currently am experiencing the following probs:
1. The Acer PowerSmart Button is not working (cannot find drivers / application to make it work)
2. Cannot switch from the onboard video card (Intel) and the "discrete" one which is an ATI Radeon Mobility 4570 HD
- Both video cards are installed
Current OS - Vista Ultimate x86 SP1