The monitor on my ACER laptop is broken. I've got an external LG monitor. However I cant view the login screen (on XP) on the broken monitor in order to login and switch monitors. The Laptop has F5 as the key to switch monitors. But fn+F5 does nothing. How can I make the external monitor my main monitor.
Also does anyone know replacing the laptop monitor is it worth the cost/effort? if so approx how much would that be?
Im interested in an alternate use of PQSERVICE and the ALT-F11 D2D Trigger. I would like to put something else other than recovery software on the PQSERVICE partition, specifically a secondary OS. One that can be launched secretly by holding the D2D key combo on startup.
As far as i know, the only limitations are that PQSERVICE has to be named that, be the first partition on disk, be smaller than 5 gigs, be of partition type, be FAT32, and has to have Acer's special mbr.
So, knowing those facts, how can i get something else other than the winPE recovery software to boot when holding down alt-f11? What file does the BIOS D2D functionality look for, is it just NTLDR?
If this is the case, i should just be able to install windows on that partition, restore acer's mbr, reset the partition type to 12, and have it work as long as i keep the other parameters the same. Hypothetically, windows would boot
I have 2 identical VAIO laptops. Sorry don't remember the model. If important
I will check when come home. But they are last year model core 2 duo.
Silver ones
One of laptops fall down. The screen is not functionning (just all kind of lines).
It goes to windows prompt( I can see background of login box.
When I connect external screen, there is no output signal.
First, I thought that something is really wrong with the board. FN F7 make no changes.
But I decided to connect external screen to my second identical laptop.
And it not gives any external signal. But when I login to windows I can switch to external with FN F7.
Looks like F7 is managed by software inside the Windows.
Logically output from the laptop should be during the boot.
What are my options? Don't want to put a nice hardware in the garbage.
I have an M6400 that came with the monster sized 210w power adapter and I'm trying to find a smaller adapter. Yesterday I tried using a Dell DA90 AC adapter, it is a smaller adapter that is used on the D820 and E1705 laptops. The output voltage is the same as the M6400 adapter, the connector plug is the same, but the max wattage is only 90watts.
As soon as I connected the DA90 the screen jumped to full brightness and the laptop poped up a message saying that this charger may not provide enough power to run the laptop and charge the battery at the same time, no surprise there. What did surprise me was that even when the M6400 is off, the DA90 will not charge the battery at all!
I also used a Kill-A-Watt meter to measure the power use of my M6400 and it uses about 50watts when not using the 3D chip (Quadro FX3700m). Has anyone had any luck using a charger other than the 210watt monster brick? I want to find something smaller and I don't mind a slow battery drain during extensive 3D graphics use.
I own an Acer Aspire 6920G. I'm thinking about changing my OS from Windows Vista, to Windows 7. Is there anything I should know, like driver and software problems? Anything I should be ready to fix if I decide to install Windows 7 On this laptop?
View 10 Replies View RelatedI'm trying to upgrade my OS from XP Home to XP Pro SP3. However during the installation process (about 70%)it just switches off and reboots back to the old OS.
Is there a special process that I'm not aware of?
The main one is the laptop keeps switching itself [going to powersave HD off mode] off, I have acer epower uninstalled and am using Vista power settings, both set to always on.
I have run all updates etc and even updated USB drivers thinking that could be an issue having read it could cause this.
The second is that I am unable to change boot order in the setup bios, it shows boot order, but will allow no changes, which makes no sense at all! So am unable to boot from any CD!
am fed up of leaving PC working only to find task stopped as its gone to sleep mode!
On another note, the specs for the LT are:
# Processor - AMD Athlon X2 QL-60 / 1.9 GHz ( Dual-Core )
# RAM - 2 GB (installed) / 4 GB (max) - DDR2 SDRAM - 667 MHz ( 2 x 1 GB )
# Hard Drive - 250 GB - Serial ATA-150
# Operating System - Microsoft Windows Vista Home Premium
# Screen - 17' TFT 1440 x 900 ( WXGA+ ) - 24-bit (16.7 million colours) - CrystalBrite
# Optical Drive - DVD±RW (±R DL) / DVD-RAM - integrated
# Graphics - ATI Mobility Radeon HD 3200 - 256 MB
# Bluetooth - Yes
# Notebook Camera - Integrated
Am I right in thinking this could run 64 bit vista ok?
I am a Macbook owner for about a year now and since I've had it I've had problems with the Login Keychain. When using Safari it asks for me to use the login keychain every few pages. This confuses me as I never set it up in the first place. Also it asks for me to use the login keychain everytime I launch Skype which is a pain in the . The only cause of this I can think of is that my IT department at college thought it would be clever to set up a login keychain before they handed my Macbook over to me and not tell me the password. I've tried my main password to log into my Macbook and its keeps saying the password is invalid. not a massive problem but still would like to get to the bottom of it.
View 5 Replies View RelatedIs there some way to quickly change the configuration of the touchpad? My wife and I use the same computer but don't like each others setup. I would be nice if there were some way to easily switch from one configuration to the other.
View 5 Replies View Relatedi havent played games on my laptop in a while and recently decided to start playing games again after upgrading to Windows 7.
I installed the drivers 197.16 for my Nvidia 9500m Gs and started playing Age of Conan.
My laptop seems to be heating up alot and the fan is always on when playing. I have read up alot and have fixed the throttling problem by using Throttlestop. Also i have disabled powermizer through resistry settings. The main problem i have now is after about 15 minutes my laptop just switches off for no reason. I have checked my temps using hw monitor and GPU gets to around 80 degrees which could be the problem?
I got a Acer Aspire 4315 for Christmas this year....
It has been running great , on Vista, untill recently....
I have 2 problems:
1....
When switching on sometimes i get a blank white screen....?
I can hear it swithing on, the fan spinning and the windows welcome noise but NO SCREEN!
What is going on?
This also happens at random times, sometimes i think its when it gets too hot?
2.....
My Ac adapter, power suply...
When left on fora long time gets very hot? I understand that this is normal...
But why does it make a very annoying high pitched noise?
So my Acer Aspire e5 571 which ive been using for about 3 days just had a windows update. Now it starts up fine but I get a black screen once I log in. However some programs are still able to see and popup randomly. I also tried going into my bIOS but it asks for a password which I do not know.
View 9 Replies View RelatedAcer Aspire V5 seems to be "stuck" on the lock screen before you go to the login screen. We are unable to swipe up to get to the next screen. I tried clicking on FN-7 to see if maybe the screen was locked but it didn't work. I powered the computer off 10 sec and unplugged .. still nothing..Â
View 1 Replies View RelatedDue to what I thought were issues with SP1, I uninstalled it. Finding it not to be the case and that the uninstall left my machine somewhat "stuttery", I set it up for a system restore and went to bed. About eight hours later, I checked it and it was still restoring! I figured it had locked up (it's done this before) so I powered it off. Dumb move, I know.
Now, though, I try to start windows but it the screen gets stuck on black before it loads up the glowing windows logo. It will do the loading animation but that's it. I've tried loading Windows from CD but it doesn't make a difference. It loads the files with the DOS-like loading screen, then does the exact same thing.
I've also tried to get it to start in Safe Mode. I push the key to get there but the start-up selection screen only flashes before going right into loading Windows normally.
Please, I don't know what to do and I desperately need this machine to get anything done. It's just outside of warranty, so if there's any way for me to fix this myself I'd like to try.
Some things I've wondered about:
1) Is there a for sure way to get into the start-up selection screen?
2) Can I format the HDD with FDISK and then load windows from my vista cd and have it reinstall?
I have an acre aspire 5535. I cannot login and keep going round in circles with the message which says "the user profile service failed to login. User profile cannot be loaded". Â I have switched off and opened again but no change.
View 1 Replies View RelatedI recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
View 6 Replies View Relatedi dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
I have an HP DV 6000T. I just bought a HP Elite M9510f Desktop from HP.com, and I don't have a monitor yet, so I am trying to connect my Desktop VGA to my Laptop VGA in and use my DV6000T as a monitor.
I also have a Sharp TV which I tried using as a monitor but the thing keeps flashing the Power and OPC lights and won't let me see anything.
Anyway I can make my Laptop monitor work with my desktop for the time being?
I have a t5750 CPU in my laptop atm (M1530), and I'd like to replace it with a t8300. Before i make a decision, id like to know if it's even possible to do?
I know the bios must recognize both and they need to be the same line or whatever, but a guy i know has a t8300 in the same laptop i do, and he is using the same bios and bios version as myself (A12).
if it is possible to stop the video card from going into 3d clocks for certain applications. For instance, my skin for my computer uses a lot of transparencies and any simple movement of a window causes the video card to go into 3d clock mode. To me that seems like an unnecessary waste of heat for just everyday simple tasks like surfing the internet etc. I'd still want it to dynamically change to 3d clocks when I run a game or something though.
View 15 Replies View RelatedHas anyone with the SZ series got the wireless switching utility to work on windows 7. I got everything else to work except that. I tried both the vista driver and xp.
I don't use bluetooth so i prefer to turn it off. But when it's disabled the blue bluetooth light is still lit
vista crashes , not to mention the bsods, and audio crackling issues and performance drop using it under vistual os. Virtual os was not as snappy as running xp. SO now i say bye bye vista and Hello xp. What are your experiences on xp? Does the machine get as hot as on vista? 65-74c while surfing on the net and listening to music? Does it have the famous audio crackling issues? Is it as buggy and slow as vista? Also what are your gaming temps? Is the fan management working correctly?
View 10 Replies View RelatedI've been contemplating a Mac, too. I recently bought an HP HDX18t, and I'm trying to decide if I want to keep it or get a Macbook Pro 17). The thing that's holding me back is that for essentially the same price as a Macbook Pro with 4 gb of RAm, I have 8gb RAM, a 160gb Intel SSD plus a 500gb hard drive, 18.4" high def monitor that is in the 16x9 format (I can have two IE windows open with no overlap), a Blu Ray burner, QX9300 Quad processors. I also love the full numeric keypad on the keyboard.
My first 3 computers were Macs (SE, IIsi, and Quadra 840AV), and I switched to PC when Windows 95 came out because I was tired of incompatibilities between my Mac and work and college computers. I was also tired of cool apps for the PC not being available for the Mac. Honestly, Windows has never given me any significant problems. Sure, I've had crashes and performance slowdowns, but I had those on my Macs, too. I've never had a virus on Windows. I've really never regretted switching to Windows...........
So my trusty old Thinkpad crapped out on me last night. I seem to have no power (adapter works, though) so I think the problem is unrelated to the hard drive and that should be okay. I've decided to replace it with a Macbook. In order to get the files off of my completely dead TP--which I'd prefer NOT to put any more money into at this point--can I turn the HD from the TP into an external hard drive and use bootcamp to boot windows from the (now) external HD, then pull files off it it that way?
Also, I read in the Migration sticky that you have to use Windows XP with SP2 and NOT SP1 with an SP2 upgrade. I think I had XP with SP1 and an SP2 upgrade. Even checking out the Windows site, those full versions all only come with SP1. What's the trick?
when I tried to play any sound (details at bottom ). Anyway, I went onto the dell website to get a driver to see if it would fix it. I had to fond this service key thing, and then it told me I needed to get these three things. They were a couple of number with a letter or two in there, meant nothing to me. So I installed one, and it came up with this grid, and the boxes were getting filled in, and then some of the, were red in the middle. My laptop was reeeaaally loud at this point. But then, the power cable went out, and I've had this problem where the laptop loses connection to battery, and it went. So then, my laptop went off. And now when I tried to switch it back on, what happens is the power button lights up, three buttons on the right light up momentarily. But the screen stays black. So then the only things indicating it's 'on' is the power button, and the three lights on the bottom of the laptop, which I have no idea of purpose. Also, my laptop is very very quiet at this point. Anyway, yeah, I've taken battery out, charger out, both out, left both out, put both in, that hasn't solved it.Â
I had been messing around with my playback devices (enabling/disabling) because I had tried using Skype. Originally, I had a problem where my skype calls were coming through my headphones (plugged into the headphone jack), but any other noise, coming through my laptop speakers. I sorted this by disabling my "communications headphones". And then now, I had a problem where I was in a skype call, when everything else stopped producing sound, bar the skype call. So I tried reopening my browser, but nothing, checked iTunes, and the music wasn't playing. So I thought it may have been the skype call. It wasn't, as I ended it, and still no noise was coming through. Then after a few minutes, there was a just this background noise coming through my headphones, like a fan. I noticed that it was coming out of my headphones when plugged in, but also my speakers when unplugged. Also, when I muted sound, the noise stopped, so I thought that may hint at where this problem may occur.
Aspire 7720-6604 Monitor Cracked. Is it easy to replace or should I send to shop? Where can I purchase a replacement and is there a special software to set it up again?
View 9 Replies View RelatedI have an dell m1710 xps and the graphics card has died (again). I know there is an onboard graphics card, and I am hoping/wondering if I can use that to transfer my files off the hard drive.
I thought maybe I should hook a monitor up to the machine, but then I don't know how to access the bios to set which card to use - as the screen is blank. I know there is a way but I cant figure it out.
My m4400 seems to like to lock up while switching users. It doesn't happen all the time, but when it does the "Please Wait..." spins away on the screen and it will stay that way forever.
The only way to fix it is to force a reboot by holding down the power button. I'm using Vista Business 64.
Just got my new Z-series laptop last week and I discovered one bit of annoyance. I can crash the laptop consistently by simply using the "Dynamic Hybrid Graphics System" switch.
Here's what happens:
- Push the switch over to "Stamina" mode
- Reboot the system
- Push the switch over to "Speed" mode
- Screen flashes, goes black, then the system crashes instantly and powers off. Sometimes it reboots, but most of the time it simply shuts down .....
After seeing the release specs of the new envy 17 My mind is very torn on if I should sell my current setup (see sig below) and get the envy 17. I love the dx 11 supporting gddr5 ati card but I wonder how much performance I will lose over dual GTX 280m's? I also love the eyefinity support and the USB 3.0 support. Is it hard to adjust from a 1920 x 1200 to a 1920 x 1080?
I am basically looking for some pro's and cons between the two systems. I am also curious what my current system would possibly sell for?