if it is possible to stop the video card from going into 3d clocks for certain applications. For instance, my skin for my computer uses a lot of transparencies and any simple movement of a window causes the video card to go into 3d clock mode. To me that seems like an unnecessary waste of heat for just everyday simple tasks like surfing the internet etc. I'd still want it to dynamically change to 3d clocks when I run a game or something though.
I've got my 7900GS flashed so I can change the Clockrate, but the drivers I'm using I guess are causing my ATI tool to reset the clock settings I put.
I used: This site to flash
I set the slide and hit "set clock" it just resets to 375/507.
I'm guessing it's the drivers. I had some drivers that would let me do just the memory, but I'm looking to get both memory and core. What do you think it is?
I feel like somehow it isn't flashed anymore. Not sure, I know I flashed it, but I can't get it to respond to overclocking at all.
I have big issue with my 1640 now that Im running windows 7 professional 32bit.
After I've been gaming for about 30 min the cpu clocks down to 0.27ghz and the bus to 182Mhz. I downloaded some software of intels website just to identify the CPU and this is what it reads:
Expected Processor Frequency: 2.40 GHz Reported Processor Frequency: 0.27 GHz Expected System Bus Frequency: 1066 MHz Reported System Bus Frequency: 182 MHz .....
I did the nvflash 79XXXXX.rom command and it asked me if I wanted to accept, I pressed "y" for yes, and it said it was successful.
So I load up windows and install coolbits and atitool, I got a steady clock at 640/1250, obviously I didnt want to keep it that high, but I benched with it and it did great, +2000 points on my 3dmark05 score. 8500!
I then changed the clocks to 450/1100 which is where I was going to keep it for everyday use, I clicked apply and went back in to verify and they were still there.
I reset my laptop and came back online the clocks were set to default.
What did I do wrong? on the newer nvidia control console it doesnt have the "apply settings upon startup" option.
i am using the 169.04 drivers so these drivers are correct(I read the newer ones do not allow the overclocking).
I'm running SZ370P here, which comes with Napa platform and C2D T7200 inside. As I've started using Lightroom and Photoshop a lot of late,
I thought a memory upgrade would give my laptop a bit of a boost in terms of handling large LR libraries and PS files.
I looked up my chipset specs and went hunting for RAM, ending up with Kingston HyperX 2x2GB as my primary choice. KHX5300S2LLK2/4G has 4-4-4-12 timings for my setup
I have a t5750 CPU in my laptop atm (M1530), and I'd like to replace it with a t8300. Before i make a decision, id like to know if it's even possible to do?
I know the bios must recognize both and they need to be the same line or whatever, but a guy i know has a t8300 in the same laptop i do, and he is using the same bios and bios version as myself (A12).
when I tried to play any sound (details at bottom ). Anyway, I went onto the dell website to get a driver to see if it would fix it. I had to fond this service key thing, and then it told me I needed to get these three things. They were a couple of number with a letter or two in there, meant nothing to me. So I installed one, and it came up with this grid, and the boxes were getting filled in, and then some of the, were red in the middle. My laptop was reeeaaally loud at this point. But then, the power cable went out, and I've had this problem where the laptop loses connection to battery, and it went. So then, my laptop went off. And now when I tried to switch it back on, what happens is the power button lights up, three buttons on the right light up momentarily. But the screen stays black. So then the only things indicating it's 'on' is the power button, and the three lights on the bottom of the laptop, which I have no idea of purpose. Also, my laptop is very very quiet at this point. Anyway, yeah, I've taken battery out, charger out, both out, left both out, put both in, that hasn't solved it.Â
I had been messing around with my playback devices (enabling/disabling) because I had tried using Skype. Originally, I had a problem where my skype calls were coming through my headphones (plugged into the headphone jack), but any other noise, coming through my laptop speakers. I sorted this by disabling my "communications headphones". And then now, I had a problem where I was in a skype call, when everything else stopped producing sound, bar the skype call. So I tried reopening my browser, but nothing, checked iTunes, and the music wasn't playing. So I thought it may have been the skype call. It wasn't, as I ended it, and still no noise was coming through. Then after a few minutes, there was a just this background noise coming through my headphones, like a fan. I noticed that it was coming out of my headphones when plugged in, but also my speakers when unplugged. Also, when I muted sound, the noise stopped, so I thought that may hint at where this problem may occur.
I have an dell m1710 xps and the graphics card has died (again). I know there is an onboard graphics card, and I am hoping/wondering if I can use that to transfer my files off the hard drive.
I thought maybe I should hook a monitor up to the machine, but then I don't know how to access the bios to set which card to use - as the screen is blank. I know there is a way but I cant figure it out.
My m4400 seems to like to lock up while switching users. It doesn't happen all the time, but when it does the "Please Wait..." spins away on the screen and it will stay that way forever.
The only way to fix it is to force a reboot by holding down the power button. I'm using Vista Business 64.
When I bought my Inspiron 3537 it came with Ubuntu, for business reasons I needed Windows, so I removed Ubuntu and installed Windows 8.1.
Now, I'm considering switching MBR to GPT, I'm 99% sure that my pc supports UEFI and that it will work fine. In order to do that I must clean my whole hdd, that's not really problem because I have backup. What bothers me is this.
There were few extra partitions on my HDD, 350 (empty) partition with no label (it's not windows system reserved) , 3GB partition with label OS. They were put there by Dell.Â
Now, considering that I have to Clean my hard disk using Diskpart, and this partitions will be removed, will I lose something? Some BIOS functionality or something like that? Is it safe to just wipe them out?
From last 2 days, I have seen that my laptop 3521 Dell doesn't switch on at all. Second thing I have observed is that, when I have my charger connected to the plug point (not connected to the laptop), I see the green light on the charger as ON, but the moment I connect it to the laptop, the light from the charger turns OFF and ultimately, my laptop doesn't charge. I mean no power supplied.
The steps I have carried over so far are -
1) I have tried checking the laptop battery by taking it out and reputing it in the laptop and trying to see if it works, same problem.
2) I have tried checking if everything is okay with the charger, but still the same problem.
I have a dell inspiron N5110 laptop.It switches off randomly when i say switches off it doesn't go to the shutdown mode it just switches off. I have run the diagnostics and everything is fine BIOS is completely up to date and there are no heating issues it sometimes switches off right after i switch it on. My warranty has expired .
I own an Acer Aspire 6920G. I'm thinking about changing my OS from Windows Vista, to Windows 7. Is there anything I should know, like driver and software problems? Anything I should be ready to fix if I decide to install Windows 7 On this laptop?
I have almost applied all methods. I have checked bluetooth is enabled in the bios settings. And also I applied the method of services.msc in command prompt.
I pressed Fn + F2 during installation but bluetooth option is not going to be on. I do not think why it is giving that problem. I have uninstalled the drivers now.
Has anyone with the SZ series got the wireless switching utility to work on windows 7. I got everything else to work except that. I tried both the vista driver and xp.
I don't use bluetooth so i prefer to turn it off. But when it's disabled the blue bluetooth light is still lit
I'm trying to upgrade my OS from XP Home to XP Pro SP3. However during the installation process (about 70%)it just switches off and reboots back to the old OS.
The main one is the laptop keeps switching itself [going to powersave HD off mode] off, I have acer epower uninstalled and am using Vista power settings, both set to always on.
I have run all updates etc and even updated USB drivers thinking that could be an issue having read it could cause this.
The second is that I am unable to change boot order in the setup bios, it shows boot order, but will allow no changes, which makes no sense at all! So am unable to boot from any CD!
am fed up of leaving PC working only to find task stopped as its gone to sleep mode!
On another note, the specs for the LT are:
# Processor - AMD Athlon X2 QL-60 / 1.9 GHz ( Dual-Core ) # RAM - 2 GB (installed) / 4 GB (max) - DDR2 SDRAM - 667 MHz ( 2 x 1 GB ) # Hard Drive - 250 GB - Serial ATA-150 # Operating System - Microsoft Windows Vista Home Premium # Screen - 17' TFT 1440 x 900 ( WXGA+ ) - 24-bit (16.7 million colours) - CrystalBrite # Optical Drive - DVD±RW (±R DL) / DVD-RAM - integrated # Graphics - ATI Mobility Radeon HD 3200 - 256 MB # Bluetooth - Yes # Notebook Camera - Integrated
Am I right in thinking this could run 64 bit vista ok?
vista crashes , not to mention the bsods, and audio crackling issues and performance drop using it under vistual os. Virtual os was not as snappy as running xp. SO now i say bye bye vista and Hello xp. What are your experiences on xp? Does the machine get as hot as on vista? 65-74c while surfing on the net and listening to music? Does it have the famous audio crackling issues? Is it as buggy and slow as vista? Also what are your gaming temps? Is the fan management working correctly?
I've been contemplating a Mac, too. I recently bought an HP HDX18t, and I'm trying to decide if I want to keep it or get a Macbook Pro 17). The thing that's holding me back is that for essentially the same price as a Macbook Pro with 4 gb of RAm, I have 8gb RAM, a 160gb Intel SSD plus a 500gb hard drive, 18.4" high def monitor that is in the 16x9 format (I can have two IE windows open with no overlap), a Blu Ray burner, QX9300 Quad processors. I also love the full numeric keypad on the keyboard.
My first 3 computers were Macs (SE, IIsi, and Quadra 840AV), and I switched to PC when Windows 95 came out because I was tired of incompatibilities between my Mac and work and college computers. I was also tired of cool apps for the PC not being available for the Mac. Honestly, Windows has never given me any significant problems. Sure, I've had crashes and performance slowdowns, but I had those on my Macs, too. I've never had a virus on Windows. I've really never regretted switching to Windows...........
So my trusty old Thinkpad crapped out on me last night. I seem to have no power (adapter works, though) so I think the problem is unrelated to the hard drive and that should be okay. I've decided to replace it with a Macbook. In order to get the files off of my completely dead TP--which I'd prefer NOT to put any more money into at this point--can I turn the HD from the TP into an external hard drive and use bootcamp to boot windows from the (now) external HD, then pull files off it it that way?
Also, I read in the Migration sticky that you have to use Windows XP with SP2 and NOT SP1 with an SP2 upgrade. I think I had XP with SP1 and an SP2 upgrade. Even checking out the Windows site, those full versions all only come with SP1. What's the trick?
however it didnt have the inaccesible boot device i was told last time this happened that the hard drives had come out of sync and that the comp was fried :| so PC world gave me a replacement.....
anyway i booted it up and got this now im running a Dell XPS M1730 with Vista SP1 however
when i press the Dell Media key which is locatewd next to the power button just over the Caps, num and scroll lock indicators it sometimes boots and sometimes dosent i dont wanna have to go back to PC world again as there all idiots and arnt
Just got my new Z-series laptop last week and I discovered one bit of annoyance. I can crash the laptop consistently by simply using the "Dynamic Hybrid Graphics System" switch.
Here's what happens: - Push the switch over to "Stamina" mode - Reboot the system
- Push the switch over to "Speed" mode - Screen flashes, goes black, then the system crashes instantly and powers off. Sometimes it reboots, but most of the time it simply shuts down .....
