HP/Compaq :: DV 6000T- Making My Laptop Monitor My Desktop Monitor
Jan 27, 2009
I have an HP DV 6000T. I just bought a HP Elite M9510f Desktop from HP.com, and I don't have a monitor yet, so I am trying to connect my Desktop VGA to my Laptop VGA in and use my DV6000T as a monitor.
I also have a Sharp TV which I tried using as a monitor but the thing keeps flashing the Power and OPC lights and won't let me see anything.
Anyway I can make my Laptop monitor work with my desktop for the time being?
Since I have a dell, I decided to ask here. My laptop is my primary unit that I use.
But there are a few things that I would like to use my desktop for, but I do not want to take up all the space that the entire desktop unit would use. Therefore, I was wondering if it is possible to run my desktop using my laptop as the display.
i dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
I have MacBook Pro (late 2008) and I have WinXP installed in Bootcamp.
Recently I acquired a Dell SP2309W monitor that is capable of 2048 x 1152 resolution. When hooked to my MBP and start in WinXP, the external monitor works fine in EXTENDED mode. That is, I can move Windows to the external monitor. The MBP display is the primary display, where the Taskbar is displayed.
What I want to do is make the external monitor my PRIMARY display, with the taskbar shown there. However, the "Use this device as the primary monitor" is greyed out.
I can extend my W530 Win8.1 display to a Dell monitor via HDMI OR a HP monitor via VGA but not both simultaneously. If I plug in both monitors simultaneously, then the HP goes to sleep and the Dell reproduces the laptop display, with no option to extend.
Is the w530 capable of extending to two monitors? If yes, do I need to get different cables or something?
I recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
Does any one know if it is possible to have 2 22" monitors on the E-Port Plus and use the notebooks display as a 3rd monitor? or is it possible to have 3 monitors attached at all? My CFO is looking for this setup and had it on his T61.
it was about gettin my laptop to use hdtv as monitor instead of laptop screen on my windows xp display part there is no option to change the output it just says notebook and theres no other option how can i get this?
I have an Acer laptop, 2 ys old or less, and the monitor went dead. The computer runs, but the monitor does not work. It has a nvidia card, and I have heard it might be the issue. Motherboard?
Howdy, I would like to add a 2nd monitor to my Lap Top and am wondering if that could create a problem with my unit. I have heard that it could possibly fry my video card.
Irecently bought a new AOC monitor 6 months ago and it worked flawlessly up to two weeks ago when it suddenly stopped working with this laptop. monitor still works great through HDMI with my brothers mac and with a seperate Blu ray player also via HDMI. so its not the monitor or cable that is causing the problem.
the driver for the monitor is installed correctly and all the extra graphics drivers such as nvidia have been uninstalled and still the screen shows 'no signal'
I suspect the issue is with the HDMI driver which i have not been able to find a driver for (i recently reformatted my laptop and had to re-install all drivers even for USB ports and mouse ) however reformatting the laptop was done in an attempt to solve this issue.
When powering my lappie on, I can hear the fans and the hard drive start, the lights come on but there is no backlight on the monitor. I did a hard boot but nothing. I tried to get into bios pressing ESCAPE or F10 after restart but same nothingness. If I can't get my lappie working, I would at least like to get data off it.
I have an HP ENVY dv6t-7300 laptop. I'd like to connect it to a 1920x2000 24" monitor. My laptop has a max screen resolution of 1366x768. A couple of questions...
1). Is an HDMI cord the best way to to connect to the monitor? 2). Will the monitor stretch the 1366 pixels to fit the 1920 pixels or will the image not fill the monitor?
My aspire v3 laptop doesn't recognize a 2560x1440 monitor I connect to it - it only gives me the best option as 1920x1080. I've down loaded the latest AMD Radeon hd 7660g drivers but it still won't work.
When I plug in an HDMI cable to my laptop the screen freezes and a black box forms around the screen. The only thing I can see is my desktop background image. Can't do anything, system is totally frozen. When I disconnect it everything works great again. What do I need to do? I'm using a HP ENVY DV7-7250us with WIN7 (64bit) installed ...
I don't wan turn on both laptop screen and my external monitor at the same time. So is there any way to make my laptop screen auto turn off as soon as I plug my external monitor vga cable to my laptop (without pressing Fn + F2 Keys) ??
Tried (and sometimes successful) to connect HDTV to laptop, Inspiron 5720. Now laptop screen does not display (goes black) without an external monitor physically attached. Tried using Projects and clicking on single laptop display, but if I disconnect the external monitor, the laptop screen just goes black. Not very portable if I have to lug around a second display.
I have an Aspire 2920 laptop with Windows Vista Home Edition O.S. It starts and works fine except that after I was using it with an external monitor (a flat screen tv) on the option to use external monitor, it only now starts thinking the monitor is the flat screen tv and does not recognizes the normal laptop screen. The laptop screen is now "pixeled" and only shows like 2/3 of its total width. I've checked in Control Panel and it has the flat screen registered as the "normal" monitor, but I can not way a find to tell the computer that the monitor is the same as usual and not the flat screen tv.
I own 15" Aspire 5738 laptop. I have hooked up 27" external monitor to it. I am facing a problem with 27" monitor. The display on the external monitor doesn't cover whole screen. The reason being that Aspire's screen is primary monitor as default. I want to make 27" monitor as primary. How can I do that?
well I have a l702p 3d, I connect it to my samsung smarTV and it works wonderfuly (hdmi ofcourse), but I have a FLATRON W2243T LG monitor (it only has DVI and VGA ports) I try to connect it using hdmi-dvi adapters but the laptop does not recognize the monitor!
I have an Inspiron 17R SE 7720 and ti works great however when I plug it into an external monitor LG W300H the resolution displayed is quite low. I try to choose a higher one but there are no options for higher resolutions. It's actually quite a bit lower than the resolution displayed on the laptops own screen.
Inspiron 1300, been plugging an external monitor in & using function F8 for years but it just failed. The monitor isn't recieving the signal anymore. Tried another monitor as well. My laptop screen is lit up as always, and I can see some movement when I cntrl alt delete, but I can't read anything to see what's wrong.Is it my video card? Is that the thing I plug my VGA cord for the monitor into?
I have a latitude E6430s running windows 7. I have it docked using a dell docking station, and have 2 dell monitors connected using dvi. With this configuration if I have the 2 monitors running I can't get any picture on the laptop screen. I wanted to be able to use all 3 screens at the same time is this even possible, how to have all 3 screen working at the same time.
I have recently purchased Dell Inspiron 15R 5521N laptop with Windows 8 Pro. When I try to connect my laptop to an Acer monitor with an HDMI cable, it gives me a no signal error. But when the same laptop is connected to a Philips monitor using the same cable, it works perfectly. As usual I thought that the monitor was the culprit, but when I connected another laptop to the Acer monitor using the same cable it worked without any errors. So where does the problem lie. The HDMI cable is OK, the laptop is also OK as also the Acer monitor?
I have a dv7t with a Fujitsu 250GB 5400rpm HDD. I've tried multiple programs including HWMonitor and non of them are able to tell me what my HDD temp is. Why can't I monitor my HDD temps?
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
I am planning to get a bigger external LCD and am thinking of connecting my DV5-1015TX to it. if I can connect this to any LCD or is there some specific kind of input type (VGA/DVI etc..) that I need to look for?
I can record via the mic, using something like the inbuilt Sound Recorder software, and the saved file contains the correct recording. However I'm not able to monitor that sound via the speakers (or headphones or external speakers).
As I'm hoping to use the laptop for music making this is a big issue - for example plugging a synth into the mic socket means that I can record the synth, but can't actually hear what I'm playing during the recording.
I've tried using a couple of professional audio applications but it's the same issue - there's no ability to monitor the input audio.
The mic socket works - as it's recording. And the hardware is able to monitor the sound - as I have heard a burst of the input sound occasionally when accessing help files or software settings when in the applications.
It sounds like a software glitch...or do you think this could be duff hardware? I don't have this problem on my desktop XP machine.
