Acer Aspire 2920 :: How To Reset Default Monitor (Laptop Screen)
Jan 6, 2015
I have an Aspire 2920 laptop with Windows Vista Home Edition O.S. It starts and works fine except that after I was using it with an external monitor (a flat screen tv) on the option to use external monitor, it only now starts thinking the monitor is the flat screen tv and does not recognizes the normal laptop screen. The laptop screen is now "pixeled" and only shows like 2/3 of its total width. I've checked in Control Panel and it has the flat screen registered as the "normal" monitor, but I can not way a find to tell the computer that the monitor is the same as usual and not the flat screen tv.
I am going to chronicle my experience with this issue. I have an Acer V7-482PG-9884 with an Intel 7260 AC wireless card running Windows 8.1 which was upgraded from Windows 8. Every 20-30 minutes, and sometimes more frequently, the internet connection drops while still connected to Wifi. Upon running the auto fix within internet explorer, Microsoft identifies the issue as a "The Defaul Gateway is Not Available." The internet connection is reset, and everything works fine for another 15-30 minutes whereby the issue repeats.
I've tried everything, switching to a different Intel Card 6205, using each and every driver available from Intel, nothing seems to properly remedy the issue. This includes playing with the power settings, turning off and on bluetooth, etc.
This is a known and widespread issue with Acer, Intel, and Microsoft.
Link to wireless connectivity test: [URL] ....
Link to intel discussion on the 7260 evidencing the known issue: [URL] .....
I want to sell my 1810tz notebook because of different reasons, one is the buzzing noise problem over speaker or line-out. So is there any easy way in resetting the 1810tz drive C: to default state like out of the box state? There is a hidden partition 12Gb in size, is that a backup Windows 7 installation partition I can access while booting or so? And if yes, will it delete all data stored on the HDD just like clean installation?
i wan to format an acer aspire 2920. I shut down the pc and put the recovery cd in but the system still opening a windows and didnt read the CD. and i didnt saw this word "press any key to boot from CD". How do I get it to boot from the cd-rom. I went into setup to change the boot sequence to boot from cd 1st but cd isn't listed as a boot option. It has HDD, ODD, USB, PCI LAN as boot options to select from in that order.
lookin for the service manual for aspire 2920, i am planning to install the internal bluetooth but don't know the the connector is located on the board
Just purcased Aspire E1-510-2611 - 64 bit, Windows 8.1 - as it was set up in store as display model it appears to be in "Display Mode" - with account already entered, etc. How do I reset to factory defaults so that when I turn it on it is just like turning it on for the first time or is there a better way to get back to the "just out of the box" condition?
My aspire v3 laptop doesn't recognize a 2560x1440 monitor I connect to it - it only gives me the best option as 1920x1080. I've down loaded the latest AMD Radeon hd 7660g drivers but it still won't work.
I own 15" Aspire 5738 laptop. I have hooked up 27" external monitor to it. I am facing a problem with 27" monitor. The display on the external monitor doesn't cover whole screen. The reason being that Aspire's screen is primary monitor as default. I want to make 27" monitor as primary. How can I do that?
Screen went black and turning on off does not get it to work. After searching tried a few of the suggested fixes for other models and no luck. Does not work with external monitor either. Are there any known bios fixes for this model...
I just got my new Acer Aspire V14 touch (Windows 8.1) and want to connect it to my Sharp Aquos LC-32DA5U TV via HDMI. I can see the picture but cannot adjust the screen resolution to the native resolution recommended for this TV (1366x768). Funny enough this is exactly the resolution my laptop is using.
When I force use of this resolution via show all in the display properties, then I don't get a picture but just a black screen on my TV.
Is there any other driver etc that I need to install to make this work? It worked perfectly fine as PnP with my old Lenovo computer under Windows 7.
I have an Acer Aspire 7740-5691. The boot screen freezes with pixel distortion at the top. I've tried all the restore discs. I found where some people referenced a similar problem with other computers and they were fixed by resetting the bios. I can't figure out how to do that. There's no place for that in the boot settings option and there's no visible coin battery to temporarily remove to reset.
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?
I recently bought a lenovo Y510P and did a clean windows 7 64-bit installation. Yesterday I reset my BIOS Setting to the default settings and now it doesnt reconise any of my hard drives or usbs anymore. The only thing I can boot from are (I think) the network cards?..
About a month ago my screen cracked and the warranty is up. I had a spare CRT laying around so I just plugged it into that and it worked just fine as a substitute. However, today I had to reformat for various reasons and I did so using a friend's similar model laptop by putting my hard drive in it. After I got windows up and running I put the hard drive back in my machine and took it home.
After trying it out with the external monitor I've come to the conclusion that the standard vga driver does not support multiple monitors and therefore not my external (since the laptop still believes that the LCD is plugged in and functional even without any of the LCD wires plugged into the motherboard).
As it is the external blinks on during POST like should when the VGA port is tested. I'm sure I could solve this problem by disabling the LCD monitor in BIOS but since I can't see anything that is not possible.
It seems the only solutions left to me are:
1. Buying a new LCD 2. Buying/finding a new laptop 3. Some crazy hardware magic to disable the default LCD and let the external display during POST so I can get to BIOS and/or Windows Safe Mode
it was about gettin my laptop to use hdtv as monitor instead of laptop screen on my windows xp display part there is no option to change the output it just says notebook and theres no other option how can i get this?
I have just bought an Aspire E15 Laptop, its working well so far, but I'm just setting the 'fiddly bits'. Can I set the numlock to default to 'ON' at start up? A minor point but just starting to annoy me!
I am still on a long learning curve operating my PC. After refreshing my Aspire E1-570. Windows to remove malware, I had to reinstall all my new apps & software which deleted . After doing that I received a message to create a recovery file to factory default file on a USB. When I tried to do there was message that new apps & software would be deleted. Can I create a recovery file without having to re-install all new apps & software again.
i just bought a new laptop acer aspire 2920 and using a windows XP.. I received a CD write "acer aspire 2920 RECOVERY" after i bought the laptop.. i dont know what does the cd for.. and now on, i wan to format the laptop but i scare if i lost some important data or LICENSE install on my laptop... and the CD i received was scared me to format it... could u pls reply me as soon as possible? what does the cd for?
I have an Acer Aspire 5741-5698 running Windows 7. I never want to connect to the internet wirelessly. I only want to connect rarely with a wired connection. I can disconnect the wireless by pressing Fn+F3 but I never see a "Launch Manager". The problem is when I turn off the computer and turn it back on, it defaults to connect wirelessly. I went to Manage Wireless Networks in Control Panel and selected Manually Connect to my home Network. That did not work. How can I stop it from connecting automatically wirelessly?
I have just bought an Aspire E15 Laptop, its working well so far, but I'm just setting the 'fiddly bits'. Can I set the numlock to default to 'ON' at start up? A minor point but just starting to annoy me!
I Just bought the Acer Aspire V17 Nitro Black edition. I live on the 10 key pad and it's frustrating that it needs to be turned on everytime I log in. I've been on "chat" with tech support and they said it can't be done without calling for paid support. I've tried regedit but I must not be entering the right choice.
When I go to the Backup and Recovery, and I have not yet created a factory default disc, to do so... it does not do that. How can I create a factory default disc?
I don't wan turn on both laptop screen and my external monitor at the same time. So is there any way to make my laptop screen auto turn off as soon as I plug my external monitor vga cable to my laptop (without pressing Fn + F2 Keys) ??
Tried (and sometimes successful) to connect HDTV to laptop, Inspiron 5720. Now laptop screen does not display (goes black) without an external monitor physically attached. Tried using Projects and clicking on single laptop display, but if I disconnect the external monitor, the laptop screen just goes black. Not very portable if I have to lug around a second display.
I bought this new acer E5-771-378y , windows 8.1 and I want to get it all set up for him before Chrismas. Why can I not use a dvd disk for the recovery restore disk? It keeps telling me to insert a 16 gb usb. I don't have a free USB to use and I would prefer to put it on disks like I have done for every other computer I have owned.
