We have a brand new Aspire E15 and are wanting to create a recovery backup on to a usb drive.
As per the user manual we type recovery in the search and select 'Acer Recovery Management'.
We then get the User Acount Control window asking if we want to allow Acer Recovery Management to make changes to the computer, then click 'Yes'.
Then nothing happens......
When I go to the Backup and Recovery, and I have not yet created a factory default disc, to do so... it does not do that. How can I create a factory default disc?
View 5 Replies View RelatedI am still on a long learning curve operating my PC. After refreshing my Aspire E1-570. Windows to remove malware, I had to reinstall all my new apps & software which deleted . After doing that I received a message to create a recovery file to factory default file on a USB. When I tried to do there was message that new apps & software would be deleted. Can I create a recovery file without having to re-install all new apps & software again.
View 2 Replies View RelatedI bought this new acer E5-771-378y , windows 8.1 and I want to get it all set up for him before Chrismas. Why can I not use a dvd disk for the recovery restore disk? It keeps telling me to insert a 16 gb usb. I don't have a free USB to use and I would prefer to put it on disks like I have done for every other computer I have owned.
View 5 Replies View Relateddifferences are between the two.
Does the factory default., only back up the files that were originally on the drive when I first bought it, regardless of what I install afterwards? and the Custom backsup everything? I noticed that Factory Default is 10GB, but the Custom is 29GB. This is confusing because I only install two small programs on top the Factory Default. WHat is the other 19GB?
I have a Aspire 6930G that came with 3 partitions.
After I make my backup image, so I still need the recovery partitions?
I recently bought a new Inspiron 15R 5521 preinstalled with Windows 8and I have never powered it on because I want to make an entire disk backupas it is in a "pure" state.
I removed its harddrive (Western Digital, 1 TB) from my laptop to connectit to my desktop with 2 harddrives (one for system (Windows 7, 64 bit); the otherfor data (2 TB)), but never started the installed system to prevent the systemfrom writing some system information into the Inspiron disk.Instead I inserted a Windows PE CD embedded with Acronis True Image 2013.I chose "Disk Backup". The Inspiron harddrive had 6 partitions.The destination drive (where the image created was to be saved) was the 2-TB data disk.Clicked "Finish" and writing Partition 1...done, 2...ok, .... 6 ok and"Backup Process Failed!" at the final stage.
The final stage seems to be a partition layout.BTW the Acronis backup system has an option "Ignore Errors" (force complete).I gave it a try too, but the image created was incomplete with only 4 partitions.Macrium Rescue Disk is a similar one but with no ignore error option.I also tried this and failed at the final stage. No image created.The error message was "Unable to read from disk".Both the Inspiron disk and the destination drive happened to be Western Digital ones.I tried Western Digital Lifeguard checker on each and found no bad sectors.
Otherwise perhaps is that a trick or technology to lock disks?
This laptop has become very sluggish and I want to restore to factory default, however, contrary to the instructions on the website,when I press F8 I can get to a Advance Boot Options menu where there is an option to repair your computer but if I select this is takes me only back into Windows no "list of system recovery tools is given"....
The other options are Safe Mode, Safe Mode with networking, Safe mode with command prompt, Enable Boot Logging, Enable low resolution video, Last known good configuration ( advanced), Directory Services Restore Mode, Debugging mode, Disable automatic restart on system failure, disable driver signature enforcement and start windows normally.
The only disks which came with the laptop ( bought new) were For reinstalling Cyberlink Power DVD DX8.3 Software for Microsoft Windows 7, P/N 5RMCO Rev A00 and For reinstalling Dell Webcam Central Software...
I have been given an Acer 6930G by a family member to setup. After realising there's 0 discs included with the laptop, the Acer pop up message tells me I have to make my own factory default image. I have successfully made it on 2 DVDs, my question is now in the manual there is nothing about how to use it, I was wondering if anyone can share any insight to me as to how it works.
Basically I know it is probably a bootable DVD as the root of the DVD suggests (several "BOOT" files) I was wondering how it actually looks like? I haven't tested it yet as the user was extremely desperate to get it running so I had to give it up the moment the DVDs were made.
If I put the DVD in and select to boot from it at start up (before getting into windows) does it take me to some sort of custom screen where I can SELECT that I want to reformat and restore the laptop? I want to know what options I am given and I can only assume that it's the same for most laptops.
And I can only assume again, that if I factory restore it, it will come back with Vista activated and all the initial bloatware again, along with all the drivers for it (so I don't need to go track them down).
This is all I need to know, I wish I can test it but I can't even get the laptop back now (until it breaks ...)
If someone can post their experiences with it I will be grateful, this is just more for reassurance than anything, and confirm my assumptions? Many thanks in advance!
EDIT: I have discovered that I can launch that recovery app by pushing ALT+F10, I have managed to wrangle the laptop temporarily to test and have discovered that I can choose from 2 back up options, but I dare not go any further, can someone tell me the next steps? One says factory default, and the other is user's backup.
I can guess that if I choose the first option, factory default, it'll ask for the DVDs I have created? And the 2nd option will restore a backup I made selecting the user option on the recovery app.
I am planning to restore my laptop to its factory default because of some problems like the "Windows Update" window is all grayed out. I tried finding solutions in the net but it doesn't solve the problem so maybe system restore may do it but inst going to remove all the programs, like MS Office? Are the files saved in drive D also be removed? My laptop has MS Office already when my mother bought it. I have Acer Aspire 5730z.
View 6 Replies View RelatedI'm trying to recover my friend's Aspire 5100 to factory default. I booted with the factory default CDs he had made. The problem i'm having is that when Vista starts up and the Acer programs are being installed (a 5 step process) the installation seems to freeze on step 4 (the eRecovery installation part)
I rebooted the computer and now when vista starts it begins trying to install the remaining 2 stages of the ACER setup.
Is there someway around this problem.
Basically, I'm wondering if i can eliminate this process and just install that stuff manually. Vista seems to have reinstalled fine, but i don't know how to get around the ACER setup.
I wrote Acer about the problem and all they could suggest was using the recovery on the hidden partition, which i'm pretty sure isn't there.
I need restoring my Extensa 5620-6419 to factory default setting. F12 doesn't seem to do it.
View 5 Replies View RelatedCan I recover MS Office Home & Student 2007 Trial Edition from the factory backup I did when I get the laptop, but without recovering anything else?
This is an Aspire 4530 running Vista.
The trial version expired and I wanted to uninstall it and install my own copy of Office 2003. But if course it would not uninstall - probably because I wasn't the real "Administrator" at the time. I followed the MS guide for forceably uninstalling and deleting the product, but that failed also.
The only recourse seems to be to re-install it from the 3 factory backup DVDs that I made when I got the laptop. But I have a feeling that all I can do is recover (overwrite) the C drive from the recovery DVDs - either all or nothing. Is that correct?
I recently bought a new Inspiron 15R 5521 preinstalled with Windows 8and I have never powered it on because I want to make an entire disk backupas it is in a "pure" state.
I removed its harddrive (Western Digital, 1 TB) from my laptop to connectit to my desktop with 2 harddrives (one for system (Windows 7, 64 bit); the otherfor data (2 TB)), but never started the installed system to prevent the systemfrom writing some system information into the Inspiron disk.Instead I inserted a Windows PE CD embedded with Acronis True Image 2013.I chose "Disk Backup". The Inspiron harddrive had 6 partitions.The destination drive (where the image created was to be saved) was the 2-TB data disk.Clicked "Finish" and writing Partition 1...done, 2...ok, .... 6 ok and"Backup Process Failed!" at the final stage.
The final stage seems to be a partition layout.BTW the Acronis backup system has an option "Ignore Errors" (force complete).I gave it a try too, but the image created was incomplete with only 4 partitions.Macrium Rescue Disk is a similar one but with no ignore error option.I also tried this and failed at the final stage. No image created.The error message was "Unable to read from disk".Both the Inspiron disk and the destination drive happened to be Western Digital ones.I tried Western Digital Lifeguard checker on each and found no bad sectors.
A friend brought over her HP Pavilion dv6226us Laptop running VISTA. The hard drive was full and the machine could not be used for anything. Would like to wipe the dirve and start over, but need a VISTA recovery disk for the machine. The D: partition where the backup files from HP resides was removed from the drive so Recovery manager is not an option. Checked the HP support site and there are not recovery disks available for HP for this model laptop with VISTA, at least when I entered all the information on the site it did not list anything.
Is there anything that can be done by copying the correct files from the WINDOWS directory on the C drive.
I would like to restore my laptop to factory settings after butchering the factory install. I see the "LENOVO" volume as Drive D, and it appears to have the restore tools, but I cannot figure out how to get to One Key Recovery. I've tried rebooting while pressing F2 or F11 repeatedly; F2 gets me to BIOS, F11 doesn't seem to do anything.
View 2 Replies View RelatedJust got my new HP Pavillion dv5-1000 laptop and I'm very pleased with it so far, apart from one problem.
The machine came without any backup disks, which seems to be a standard HP thing. So I've tried to create my own disk using the Recovery Manager software. It goes through the first part of the process collecting files, but when it reaches 100% I get an error message saying that the files are more than 0mb and it can't continue.
I've tried using a different blank DVD but get the same message.
It's a pain, and is spoiling my enjoyment of an otherwise excellent machine. If anyone can suggest a way around this I'd be grateful.
I've tried this fix:unable to burn Recovery DVD but the software doesn't install.
I have the operating system disk to restore my Dell Inspiron 8600 Laptop, but I can't find my Windows certificate of Authenticity that will work--I must have at least four or five. I've looked all over the web and the Dell.com to no avail.
View 6 Replies View RelatedI got a new SSD 512GB and will swap it with origianl HDD . How to put the origianal factory default image into SSD..
View 1 Replies View RelatedI have a brand new T440 which I am populating and customising.I created a new partition on the HDD using MiniTool Partition Wizzard. That may have created the problem - I can't create the recovery media. I get a message that the files are not there. I should have done it before partitioning - too late now.
However, using the Partition Wizzard, I can assign a drive letter to the Recovery partition, and it becomes visible in Windows Explorer (File manager). I can copy the content on an external HD drive.
I have a Dell Inspiron 17R Special Edition Laptop with Windows 8, bought on 12/16/2012. The Dell Backup and Recovery version 1.0.0.2 does not seem to work properly when using the "Recovery Media" option (“Create a copy of your factory image in case of critical hardware failure.”) for doing a "Factory Backup" with Discs.I am using new Maxell DVD+R discs.
After the first disc is written and validated it is ejected. A new blank disc is requested, placed in the drive, and then OK is clicked, and the new disc is in for a short while and then ejected without anything being written to it. Also, the DVD is still listed in the File Explorer as "DVD RW Drive (D:) Recovery" even though no DVD is in the drive and the drive tray is in (normally, when there is no DVD in the drive the DVD drive is no longer shown in the File Explorer).
If the backup is canceled and a blank disc is placed back in, then checking the properties of the disc shows 0 GB available and 0 GB Used - this error is corrected by Restarting the computer. After the Restart the disc is properly shown to have 3.9GB Available and 0GB Used.I tried again to do the backup and the same thing happened, with only the first disc actually being written and validated. That first disc is named “Recovery” and it does contain folders: Boot, EFI, preload, and Recovery. It has files: AUTORUN.INF, BOO.MGR, BOOTMGR, BOOTMGR.EFI, MASTERLOG, and Media.ico. Used space is 3.81 GB.
Since the Dell backup program for the factory image does not seem to recognize that a new blank disc is inserted after it was done with the first disc, I cannot make a backup of the factory image.
I made a USB back up using the Dell Backup and Recovery/Factory backup. I can't seem to get my laptop to boot up from a USB, though. I've looked at all the options I see via F2 and F12. But I see no mention of USB as something it could boot from.
My machine is an Inspiron 15 7000 series.
Backup Recovery version1.75.63
I clean all partition, using windows instalator to create two partition: 100GB and 890GB. When i try to install windows i see:
,,Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information"
I set:
Configuration: Sata Controller Mode -> Compatible
Boot mode: Legacy Supprt
Boot priority: Legacy First
How to create an iso file for the windows 8.1 oem pre installed on my notebook for future references.
View 3 Replies View Relatedi have a Dell M5040 when i launch Dell Datasafe 2.0 the section to create Recovery Media has both the USB and CD/DVD grayed out. How do I reset Datasafe in case there was a limit to create only 1 copy of the recovery cds (which are no where to be found)?
View 16 Replies View RelatedWhere Can I download or order a Boot Disc for my Z580? It came with Windows 7, and PC World were offering a free upgrade to Windows 8.
I am currently unable to create a Factory Default Recovery Disc. There is an error with the Onekey Recovery software in burning onto the DVD / Disc. I have tried two different DVDs (4.7GB), and have tried a CD (740MB). And I receive the same error about one fifth of the way through.
The reason I am having to do a factory reset, is because my Wirless Network driver is not working, and the laptop no longer accepts external wireless USB dongles. I can't get internet even with a wired connection. It isn't to do with whether the wireless is switched on or not. I've tried this.
What is Lenovos policy about providing customers with the means to restore their Laptops? In the past computer manufacturers / suppliers provided all the software and bootdiscs.
Today I received my new worklaptop, a W540 with Windows 8 installed.
The first think I wanted to do was to create recovery media (I'm going to re-install on a SSD). However, trying to run the Windows 8 "Create recovery media" tool, as sugested by Lenovo, results in the following:
The option "Copy the recovery partition ..." is grayed out, and I can not select it. Pressing Next results in the following:
I'm trying to use the laptop as a hot spot for my Wifi Ipad to draw from. I'm using currently a Telstra USB Dongle on the laptop.
View 1 Replies View RelatedI'd like to create a factory backup disk to the Dell laptop that I recently aquired (Inspiron 14). I want to save this factory backup on an external WD flash drive (that has 500GB). This disk contains, already 100GB of other personal data.
My question is: will the process of creating factory disk delete all other data on that drive (I don't want that to happend of course) or it will create the Image disk in addition to the other data the in this disk?? Dell's wizard said that the factory data requires only 9.2GB so there's plenty of space for all the data together.
I have just bought an Aspire E15 Laptop, its working well so far, but I'm just setting the 'fiddly bits'. Can I set the numlock to default to 'ON' at start up? A minor point but just starting to annoy me!
View 2 Replies View RelatedI bought a new DELL SE 7520 . It has 2 problems:
1. flash drives and dvd drives are not shown in the " my computer "
2. cant able to create recovery disc{ runs good for the 1st dvd when i inserted the second dvd its just ejects not doing any other action }