Acer :: ERecovery Custom Backup Vs Factory Default Backup
Jul 6, 2009
differences are between the two.
Does the factory default., only back up the files that were originally on the drive when I first bought it, regardless of what I install afterwards? and the Custom backsup everything? I noticed that Factory Default is 10GB, but the Custom is 29GB. This is confusing because I only install two small programs on top the Factory Default. WHat is the other 19GB?
I have a Aspire 6930G that came with 3 partitions.
After I make my backup image, so I still need the recovery partitions?
I am still on a long learning curve operating my PC. After refreshing my Aspire E1-570. Windows to remove malware, I had to reinstall all my new apps & software which deleted . After doing that I received a message to create a recovery file to factory default file on a USB. When I tried to do there was message that new apps & software would be deleted. Can I create a recovery file without having to re-install all new apps & software again.
I have been given an Acer 6930G by a family member to setup. After realising there's 0 discs included with the laptop, the Acer pop up message tells me I have to make my own factory default image. I have successfully made it on 2 DVDs, my question is now in the manual there is nothing about how to use it, I was wondering if anyone can share any insight to me as to how it works.
Basically I know it is probably a bootable DVD as the root of the DVD suggests (several "BOOT" files) I was wondering how it actually looks like? I haven't tested it yet as the user was extremely desperate to get it running so I had to give it up the moment the DVDs were made.
If I put the DVD in and select to boot from it at start up (before getting into windows) does it take me to some sort of custom screen where I can SELECT that I want to reformat and restore the laptop? I want to know what options I am given and I can only assume that it's the same for most laptops.
And I can only assume again, that if I factory restore it, it will come back with Vista activated and all the initial bloatware again, along with all the drivers for it (so I don't need to go track them down).
This is all I need to know, I wish I can test it but I can't even get the laptop back now (until it breaks ...)
If someone can post their experiences with it I will be grateful, this is just more for reassurance than anything, and confirm my assumptions? Many thanks in advance!
EDIT: I have discovered that I can launch that recovery app by pushing ALT+F10, I have managed to wrangle the laptop temporarily to test and have discovered that I can choose from 2 back up options, but I dare not go any further, can someone tell me the next steps? One says factory default, and the other is user's backup.
I can guess that if I choose the first option, factory default, it'll ask for the DVDs I have created? And the 2nd option will restore a backup I made selecting the user option on the recovery app.
Can I recover MS Office Home & Student 2007 Trial Edition from the factory backup I did when I get the laptop, but without recovering anything else?
This is an Aspire 4530 running Vista.
The trial version expired and I wanted to uninstall it and install my own copy of Office 2003. But if course it would not uninstall - probably because I wasn't the real "Administrator" at the time. I followed the MS guide for forceably uninstalling and deleting the product, but that failed also.
The only recourse seems to be to re-install it from the 3 factory backup DVDs that I made when I got the laptop. But I have a feeling that all I can do is recover (overwrite) the C drive from the recovery DVDs - either all or nothing. Is that correct?
Back in my Windows days and for my servers at work (just a few), I always did the following to do backup:
1) DATA Use SyncToy or copy the data folders (My Documents, etc.) to an external hard drive
2) OS and APPLICATIONS Create an image using Acronis's TrueImage, so I don't have to re-install the applications or re-configure the OS
With Time Machine, I know it backups my User folder (Documents, Music, etc.), but does it also backup the computer settings, such that in the case of re-install, I just pop-in the original OSX Installation CD and restore from Time Machine without reconfiguring the OS AND re-installing the application again?
I noticed in the Time Machine hard drive there is also an Applications folder that contains the list of the same applications as installed in my MBP.
I have a Thinkpad x130e. I completed my first backup using the Lenovo Rescue and backup application. The backup completed normally but, I still have an outstanding message in the message center telling me 'you need to perform your first backup'.
I have a Dell Inspiron 17R Special Edition Laptop with Windows 8, bought on 12/16/2012. The Dell Backup and Recovery version 1.0.0.2 does not seem to work properly when using the "Recovery Media" option (“Create a copy of your factory image in case of critical hardware failure.”) for doing a "Factory Backup" with Discs.I am using new Maxell DVD+R discs.
After the first disc is written and validated it is ejected. A new blank disc is requested, placed in the drive, and then OK is clicked, and the new disc is in for a short while and then ejected without anything being written to it. Also, the DVD is still listed in the File Explorer as "DVD RW Drive (D:) Recovery" even though no DVD is in the drive and the drive tray is in (normally, when there is no DVD in the drive the DVD drive is no longer shown in the File Explorer).
If the backup is canceled and a blank disc is placed back in, then checking the properties of the disc shows 0 GB available and 0 GB Used - this error is corrected by Restarting the computer. After the Restart the disc is properly shown to have 3.9GB Available and 0GB Used.I tried again to do the backup and the same thing happened, with only the first disc actually being written and validated. That first disc is named “Recovery” and it does contain folders: Boot, EFI, preload, and Recovery. It has files: AUTORUN.INF, BOO.MGR, BOOTMGR, BOOTMGR.EFI, MASTERLOG, and Media.ico. Used space is 3.81 GB.
Since the Dell backup program for the factory image does not seem to recognize that a new blank disc is inserted after it was done with the first disc, I cannot make a backup of the factory image.
I made a USB back up using the Dell Backup and Recovery/Factory backup. I can't seem to get my laptop to boot up from a USB, though. I've looked at all the options I see via F2 and F12. But I see no mention of USB as something it could boot from.
I'd like to create a factory backup disk to the Dell laptop that I recently aquired (Inspiron 14). I want to save this factory backup on an external WD flash drive (that has 500GB). This disk contains, already 100GB of other personal data.
My question is: will the process of creating factory disk delete all other data on that drive (I don't want that to happend of course) or it will create the Image disk in addition to the other data the in this disk?? Dell's wizard said that the factory data requires only 9.2GB so there's plenty of space for all the data together.
I have a laptop in our lab that was full of a bunch of software that had been installed over the last year or so and I was trying to bring it back to how it was shipped from the factory. After booting with the F8 option then through Advanced Options I selected to restore the laptop to the factory image since there was no data that I needed from the unit. After the laptop restoration was finished I now boot to the BSOD and it perpetually asks for a startup repair which does not work. I made this unit a door stopper needless to say since there are no disks included in the purchase. Is there any way to get this laptop back to factory?
I'm about to get back to my old OS which was set up on this laptop when I bought it , I'm going to use my back up dvd's , which I made after I have bought this laptop. The question is during backup will the HDD be formated or I have to come up with a way how to do it before I use my back up dvd's ?
I was trying to do a Factory Recovery in my Acer Aspire 5610z using eRecovery. Everything was fine until the "Acer Launch" window appeared.
Now it stuck at "Process 1/2","Install eRecovery solution", "Please wait"
There is another window behind it but I am unable to view it, this is going on for more than 2 hrs and I would very much appreciate your help to acomplish this recovery. the axer lauch window couldn't be moved.
I bought the Walmart special and am actually happy with it. I didn't have much money to spend and after removing all the crapplications, installing AVG etc... it's running well. If I had XP to install I would have done it from the start but I'll live. I'm even managing to run WoW with no issues after tweaking in game specs and playing in the Catalyst Control Center.
Now...my problem. I uninstalled all the Acer utilities and now eRecovery will not work for me. I'd like to back up the OS and drivers so if need be I can restore to factory or at least close. Can I do this with NTI Backup Now? or will that just back up folders and files? If not what can I use to make restore discs.
I have the AS1410 with win7. I couldn't get the virtual cd solution to work (perhaps that is because the version is now 10 not 9 or that I'm on win7 64bit). So my approach is to copy the the first 2 partitions, PQService and the 100MB one, and track 0 (MBR). These are all that is needed to build a new system on a new disk (I think). So here is my how to:
1. Grab your free copy of Paragon Backup and Restore from here and install it and get a free serial number from the web page it gives when you install.
2. Run it and choose backup disk or partition. Tick to save track 0 + MBR, and the first 2 partitions before C: to an empty directory on C:. Remember to apply changes then wait for this finish.
3: Copy this directory to a PC with a DVD burner.
Inside the directory you'll find the archive files split into DVD size chunks. Burn these to DVDs together with downloads of Paragon Backup and Restore, 32bit and 64bit to cover all bases if you want, plus the serial number, and a text file telling yourself what to do, which is: Install Paragon Backup and Restore, combine all the archive files into one directory on a hard disk, then rebuild track 0 and the first 2 partitions.
I have an Acer Travelmate 6460 with Windows XP on it. I want to format my harddisk and put a Vista Business on it (no OEM). With that format I mean complete one, including the PQService partition from Acer.
Basically I want to have an 'Acer clean' laptop in the end (I only want the drivers for the hardware, and the downloads to make the soft keys working).
Now first of all i can not delete the PQService partition (not in Windows, not in the Vista installation program after booting from dvd). That made me curious and searched the internet.
Now I've read that it is possible that after deleting the PQservice partition, you loose the MBR and can not boot anymore. I don't want to take that risk because I do not want to loose many time during working hours.
I'm a software developer, knows a fair bit of hardware but I really like some advice of some 'manual' of what to do to accomplish what I want. (If that is possible).
I haven't been able to locate a Windows 7 x64 version of Acer eRecovery.
I can get to the basic operating system required for restoring user backup files by inserting the Restore CD in the CDROM. But if I select Restore from the eRecovery menu, after selecting the desired restore file the PC reboots into normal startup mode instead of rebooting into basic operating system for the Restore function.
Firstly the power management button does not seem to work.
I have of course launch manager and power management programs installed.
When i press the button, it does light up green, but i have no indication on the screen like i have when i activate wlan or bluetooth.
When the drivers of the powersmart manager are uninstalled the button does not light up green when i press it, so it partially works.
Also, nothing changes in my power settings nor the screen brightens down, no sign that it works.
Actions i took so far: I uninstalled and installed both programs, and i run them as admin.
I installed first the launch manager and then the power management.
Nothing changed.
I go to c: program files:acer:acer powersmart manager and try to open the right exe file which i think is ePowerMsg but then i get an error message saying that the element ePowerMsg stopped working.
The window is this: Is this the right exe? I tried with ac only, ac and battery, battery only, same results.
As of today, Aspire V3-112P BIOS files, even the onboard version file, have not be available for download. When will Acer release a bios file, even the old one, for download?
F2 enter into BIOS, but found noway to backup BIOS to a file. Fla**bleep**.exe backup.fd /g (with version 2.0) failed to backup.
So it comes to the second question: how to backup the current onboard BIOS to a file? It looks like insydeflash can't backup onboard BIOS to file without providing an existing BIOS file. It's so awful.
I am planning to restore my laptop to its factory default because of some problems like the "Windows Update" window is all grayed out. I tried finding solutions in the net but it doesn't solve the problem so maybe system restore may do it but inst going to remove all the programs, like MS Office? Are the files saved in drive D also be removed? My laptop has MS Office already when my mother bought it. I have Acer Aspire 5730z.
I'm trying to recover my friend's Aspire 5100 to factory default. I booted with the factory default CDs he had made. The problem i'm having is that when Vista starts up and the Acer programs are being installed (a 5 step process) the installation seems to freeze on step 4 (the eRecovery installation part)
I rebooted the computer and now when vista starts it begins trying to install the remaining 2 stages of the ACER setup.
Is there someway around this problem.
Basically, I'm wondering if i can eliminate this process and just install that stuff manually. Vista seems to have reinstalled fine, but i don't know how to get around the ACER setup.
I wrote Acer about the problem and all they could suggest was using the recovery on the hidden partition, which i'm pretty sure isn't there.
When I go to the Backup and Recovery, and I have not yet created a factory default disc, to do so... it does not do that. How can I create a factory default disc?
I bought this new acer E5-771-378y , windows 8.1 and I want to get it all set up for him before Chrismas. Why can I not use a dvd disk for the recovery restore disk? It keeps telling me to insert a 16 gb usb. I don't have a free USB to use and I would prefer to put it on disks like I have done for every other computer I have owned.
This is a guide on backing up DVDs on a Mac. I myself own the old iMac 21 inch running OS X.
One day I was like hmm, what if I lose some DVDs, how would I ever watch them again? I was like wait, I could always back them up. But then I realized, I was using a Mac and wondered if it was possible, as I had never backed up any DVDs before and I thought all the software was mostly all for Windows (I was a Mac noob, forgive me).
Well it turns out there are some fine programs that make it easier.
Some info you should know before I start:
-Try at your own risk! I know there isnt really that much of a risk, and I highly doubt any of this will somehow destroy your computer, but there always is that far-off slim chance.
-This was all done on the old generation iMac all in one, Intel (this is important), 1 GB of RAM, ATI Radeon HD 2400, 250GB HD, Apple OS X. I DO NOT KNOW IF THIS WILL WORK ON SNOW LEOPARD. However, I think it should, since there really arent that much differences between the two operating systems. HOWEVER, since the required downloads were released and designed for OS X, I wouldn't give it a shot, but it's your choice.......
when I made my OS factory default backup the HP tool said I can only make one backup.. what gives here? Is this true?.. if i need to reinstall from my backup can i then reuse the same tool to make another backup?
I've tried disk utility to create an image of it; it won't boot after this and once the bootcamp wizard has been run, still doesn't recognise that an os is on the partition.
Also tried Winclone; of which has to have exactly the same partition size as previous otherwise it doesn't work properly.
Can anyone suggest something like symantec ghost or osx equiv? Same for backing up osx partition; want something that I can just restore if needed. Used CCC but for some reason cannot get it to not keep all my previous files, so when restoring it also restores all deleted files too.
