Since I have a dell, I decided to ask here. My laptop is my primary unit that I use.
But there are a few things that I would like to use my desktop for, but I do not want to take up all the space that the entire desktop unit would use. Therefore, I was wondering if it is possible to run my desktop using my laptop as the display.
I have an HP DV 6000T. I just bought a HP Elite M9510f Desktop from HP.com, and I don't have a monitor yet, so I am trying to connect my Desktop VGA to my Laptop VGA in and use my DV6000T as a monitor.
I also have a Sharp TV which I tried using as a monitor but the thing keeps flashing the Power and OPC lights and won't let me see anything.
Anyway I can make my Laptop monitor work with my desktop for the time being?
I can extend my W530 Win8.1 display to a Dell monitor via HDMI OR a HP monitor via VGA but not both simultaneously. If I plug in both monitors simultaneously, then the HP goes to sleep and the Dell reproduces the laptop display, with no option to extend.
Is the w530 capable of extending to two monitors? If yes, do I need to get different cables or something?
I have the Pavilion g7-2235dx with Windows 8.1 operating system. Nearly every automatic update messes up my ability to get on the internet. The only way I can connect is to uninstall all of the updates. The icons on my desktop also stopped working. When I click on them, it goes right back to desktop. Can't pin them to the taskbar either. The ones on the taskbar won't open by clicking on them either. Have to right click and tell it to open. Also problem getting my Norton anti-virus to open. Says it working but can't open it.
I have just bought my G62 laptop and have pretty much no complaint except the backspace's bounce seems to be a bit off and a little loud. However, I seem to notice this weird dimming issue when I set my laptop to either Power Saver or HP Recommended mode. When I go from the internet browser to the desktop and wait like 3 seconds, the screen seem to dim just a tiny bit. Sometimes it dims twice. Most noticeable when using the lowest brightness level. It's really bothering me, does anybody know what it is? It's not the auto-dim feature, because it dims in like 3 second. It just flickers a little bit.
Also, when I move a browser or window up and down, I can see this fuzziness on the outline of the window, including the outline of the search bar. I updated the display adapters, I have Intel HD Graphics display adapters.
Does any one know if it is possible to have 2 22" monitors on the E-Port Plus and use the notebooks display as a 3rd monitor? or is it possible to have 3 monitors attached at all? My CFO is looking for this setup and had it on his T61.
it was about gettin my laptop to use hdtv as monitor instead of laptop screen on my windows xp display part there is no option to change the output it just says notebook and theres no other option how can i get this?
Irecently bought a new AOC monitor 6 months ago and it worked flawlessly up to two weeks ago when it suddenly stopped working with this laptop. monitor still works great through HDMI with my brothers mac and with a seperate Blu ray player also via HDMI. so its not the monitor or cable that is causing the problem.
the driver for the monitor is installed correctly and all the extra graphics drivers such as nvidia have been uninstalled and still the screen shows 'no signal'
I suspect the issue is with the HDMI driver which i have not been able to find a driver for (i recently reformatted my laptop and had to re-install all drivers even for USB ports and mouse ) however reformatting the laptop was done in an attempt to solve this issue.
Tried (and sometimes successful) to connect HDTV to laptop, Inspiron 5720. Now laptop screen does not display (goes black) without an external monitor physically attached. Tried using Projects and clicking on single laptop display, but if I disconnect the external monitor, the laptop screen just goes black. Not very portable if I have to lug around a second display.
well I have a l702p 3d, I connect it to my samsung smarTV and it works wonderfuly (hdmi ofcourse), but I have a FLATRON W2243T LG monitor (it only has DVI and VGA ports) I try to connect it using hdmi-dvi adapters but the laptop does not recognize the monitor!
I have an Inspiron 17R SE 7720 and ti works great however when I plug it into an external monitor LG W300H the resolution displayed is quite low. I try to choose a higher one but there are no options for higher resolutions. It's actually quite a bit lower than the resolution displayed on the laptops own screen.
When powering my lappie on, I can hear the fans and the hard drive start, the lights come on but there is no backlight on the monitor. I did a hard boot but nothing. I tried to get into bios pressing ESCAPE or F10 after restart but same nothingness. If I can't get my lappie working, I would at least like to get data off it.
Inspiron 1300, been plugging an external monitor in & using function F8 for years but it just failed. The monitor isn't recieving the signal anymore. Tried another monitor as well. My laptop screen is lit up as always, and I can see some movement when I cntrl alt delete, but I can't read anything to see what's wrong.Is it my video card? Is that the thing I plug my VGA cord for the monitor into?
I have a latitude E6430s running windows 7. I have it docked using a dell docking station, and have 2 dell monitors connected using dvi. With this configuration if I have the 2 monitors running I can't get any picture on the laptop screen. I wanted to be able to use all 3 screens at the same time is this even possible, how to have all 3 screen working at the same time.
My aspire v3 laptop doesn't recognize a 2560x1440 monitor I connect to it - it only gives me the best option as 1920x1080. I've down loaded the latest AMD Radeon hd 7660g drivers but it still won't work.
I have recently purchased Dell Inspiron 15R 5521N laptop with Windows 8 Pro. When I try to connect my laptop to an Acer monitor with an HDMI cable, it gives me a no signal error. But when the same laptop is connected to a Philips monitor using the same cable, it works perfectly. As usual I thought that the monitor was the culprit, but when I connected another laptop to the Acer monitor using the same cable it worked without any errors. So where does the problem lie. The HDMI cable is OK, the laptop is also OK as also the Acer monitor?
When I plug in an HDMI cable to my laptop the screen freezes and a black box forms around the screen. The only thing I can see is my desktop background image. Can't do anything, system is totally frozen. When I disconnect it everything works great again. What do I need to do? I'm using a HP ENVY DV7-7250us with WIN7 (64bit) installed ...
I don't wan turn on both laptop screen and my external monitor at the same time. So is there any way to make my laptop screen auto turn off as soon as I plug my external monitor vga cable to my laptop (without pressing Fn + F2 Keys) ??
I have an Aspire 2920 laptop with Windows Vista Home Edition O.S. It starts and works fine except that after I was using it with an external monitor (a flat screen tv) on the option to use external monitor, it only now starts thinking the monitor is the flat screen tv and does not recognizes the normal laptop screen. The laptop screen is now "pixeled" and only shows like 2/3 of its total width. I've checked in Control Panel and it has the flat screen registered as the "normal" monitor, but I can not way a find to tell the computer that the monitor is the same as usual and not the flat screen tv.
I own 15" Aspire 5738 laptop. I have hooked up 27" external monitor to it. I am facing a problem with 27" monitor. The display on the external monitor doesn't cover whole screen. The reason being that Aspire's screen is primary monitor as default. I want to make 27" monitor as primary. How can I do that?
I recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
My Aspire 5738 is hooked up with AOC brand 27" HDMI external monitor by HDMI cable. This monitor is without any speakers. I made this monitor PRIMARY to 15" Aspire 5738 screen.
When I play a DVD/CD using ROM drive NO SOUND comes out from built-in speakers of Aspire laptop. But picture runs on AOC monitor which is not useful. Aspire 5738 has TWO sound processors in device manager. One is Intel (Default) and other one ReaLTek, both are HD quality.
"How to configure (If Possible) any of the TWO sound processors to HDMI" OR any other practical solutions?