I have got a Dell 9300 that I've been using for recording for a while. I've recently gotten a new external audio interface, a Presonus Firestudio that I connect to the Firewire port on the 9300. I'm getting digital noise coming through the Firestudio from the 9300 through the Firewire port. The noise, ie. chirping, clicking and popping, happens when you move your mouse or resize a window.
I've tried running the interface into the computer using a PCMCIA to FW adapter and running it into the cardbus slot. That has reduced the noise some, but has not eliminated it.
I don't remember getting this noise always, but I certainly have been dealing with it for a while. The noise isn't recorded so I can record just fine, it's just noisy when I'm monitoring.
I had noise coming from my optical drive. The computer randomly checks my optical drive as if I were booting up or put a disk in it. I took it out, re-seated it and flashed the BIOS. It seemed to be better for a week or so but it has come back with a vengeance. I keep hearing the click of it accessing at odd times (again, when I insert a memory stick, or am working with pictures, were some times that it makes the noise). I now crack the door and leave the drive open so it's not accessing on and off all the time. Inspiron 15R,5520
I have a Dell XPS L502X laptop and lately I keep hearing this loud short little "squeak" noise coming from where the fan is sometimes. I have confirmed it is not the hard drive acting up as I have run a diagnostic program to check HD health and it is fine, but I have the feeling something is up with the fan. Would the fan have to be replaced? It seems to be working properly but that noise makes me worried something is up.
I have a VGN-NS135E and at random times there is a staticy sound coming from the speakers like bad reception on a radio. It happens randomly it seems regardless if i'm listening to music or not.
It happens with the volume on and on mute. I can hear audio just fine. When the speakers decide to make that static noise the audio is clear, just mixed with static
I tried using the hlt command in RM CPU clock utility, like many people have suggested, but the version I have does not even let me check the box. It is an option though, but the writing is in grey and cannot be chosen.
I was wondering if maybe there were some other options i could tweak to lessen the damn noise!
Under "advanced CPU settings" , I can choise the ACPI state to modifiy but there are the only options i could change: Enable CPU low power Enable Northbridge Low power Enable FID/VID change And i can change the clock divisor to the following: 8,16,32,64,128,256,512.....
I just installed windows vista 32-bit on bootcamp, my problem is that when i am using vista, there is this high pitched noise coming from the laptop, but the noise isnt there when i use leopard.
I have a HP Pavilion dv6-6119tx Entertainment Notebook PC. There is a sparking/cracking type of Noise during Startup & sometimes during usage,which makes it too irritating to listen to songs or other things. My Audio drivers are upto date,tried installing & uninstalling them but of no luck....
When I pause playback of an .mp3, there's permanent white noise coming from the internal speakers.
Stopping the playback stops the white noise after approximately 4 seconds. I never had this issue with any laptop / soundcard. Can this be fixed?
I have the latest BIOS and drivers installed. Headphones are fine (no white noise).
Maybe the inbuilt L440 soundcard has a problem. I had to return my first L440 because there was a loud plop when starting playback and the left speaker was way quieter than the right one.
In the German part of this forum people are reporting problems realted to the internal speaker (cracking sound, white noise).
My E4300 shipped in October with the old Firewire 400 (IEEE 1394). Does anybody know if Dell is shipping Firewire 800 (IEEE 1394b) yet and if the E4300 can be updated?
Do Vaio Z Series laptop owners use their laptop as their main primary computer or a secondary computer? Do Vaio Z series owners also have a desktop pc as their primary computer and use their Vaio Z Series as a secondary computer? Or is your Vaio Z Series laptop your one and only computer that you always use? Is it comfortable using the 13 inch screen for long periods of time?
Reason i ask is some people have more then one computer and some people just have one.
I'm just wondering if the Vaio Z Series laptop is a good choice as a main computer since it's got good specs and it's nicely portable but will the 13 inch screen be ok to use for long periods even at the higher 1600 x 900 resolution?
I have a Dell Inspiron E1705 that I purchased a few years ago. I am taking it with me on vacation in June. I plan to bring my camcorder along as well.
The problem is while my desk top has a firewire card for transfering video from the camera to the computer, the laptop does not. So I will have n way right now to make any transfers.
Is it possible to add a firewire card to my Dell after market or is there another option I'm not aware of?
I have a new Studio 15 with firewire port. I just purchased a new camcorder to transfer DV tapes to DVD.
I got the camera specifically because it was supported by vista. But the laptop doesnt recognize the camera. Ive done a good bit of research and it seems to be a vista problem.
Ive tried all the solutions i could find on the net. Even modifying the registry per the instruction from microsoft support .....
I'm having a problem with a Firewire Audio card when recording from a MIDI input. It works okay for a few seconds,
then i get the dreaded BSOD - I haven't had time to look through the dump file yet, but the thread ks.sys is mentioned.
I've had a look about, and I think the problem is something to do with the ASIO4All driver I installed (and subsequently uninstalled) OR how the IRQs are set up in windows.
I have a MiniDV camcorder with lots of old cassettes I want to convert. I have tried unseccessfully to get an S-Video converter to work. Based on my research, my best option is to hook it up to a PC via a firewire. Unfortuately my recently purchased Inspiron from Dell does not have a firewire port. its possible to add a firewire port to this laptop?
I have a new XPS 1530 & was trying to find the specs on the components & couldn't find any. Could someone tell me the specs, or where I can find them on my computer? I'd like to find the following:
Ethernet -- 10/100 OR 10/100/1000 Firewire (1394) -- 400 or 800
Also, for the wireless card for Intel WiFi 4965AGN 1) is it dual band, 2) what speed (Mbps)?
I have the TZ series laptop. It has a S400 port. I also have a Sony external DVD/RW optical drive that only has an S400 port (the optical drive was meant for the UX series per the Sony website). I understand that it's almost the same as firewire1394, but you need to hook up devices that are powered (which is fine since my external optical drive has it's own AC plug).
Can I just buy a regular firewire 1394 cable or do I need a special S400 cable from Sony to hook up the DVD to my TZ?
I'm having a problem connecting my video camera to my HDX. The port itself seems to work as I was able to connect my external hard drive to it and it was found.
It's not the camera as I hooked it up to a different PC's firewire port and it was found. Not the cable either.
I've conected two mini dv camcorders (Sony HC-37E & JVC GR-D70EK) to my brand new Acer Aspire 5920, via firewire, & none of them are 'seen' by vista home premium and therefore don't work.
Both cam's work on an Acer desktop running vista home basic.
One thing I have noticed is that the firewire reported on the desktop is Texas instruments (whereas the laptop reports RICOH).
Especially in the circumstances of video editing and digitizing. What is the process that people would do now?
Would they put the camera in the firewire nd then capture via USB of the external hard drive and then put the firewire for the hard drive after capturing and on to editing?
Why is it that it seems only the Mac Pro is the only Mac that now has more than one fire wire port?
I want to transfer some old DV tapes to DVDs through an old JVC mini-DV camcorder with a DV/4-pin firewire connection but I do not know how many pins the firewire port on my laptop is. I was under the impression that all notebooks used a 4-pin connection, and it looks like it is 4 pins, but the connector pin assignments section of the user manual lists it as 6 pins.
I was thinking about getting a mini-PCI firewire card like this one [url] and putting that into the mini-PCI slot that normally houses the WLAN card. I'd really like firewire on this laptop.
why the new models of pavilion like dv5,dv4 or dv3 the most of all models doesnt come with the firewire (1394) port? only few models? are good this models or are better the old models like dv6500?
Ive purchased a 4TB external HDD for use with my MBP.
The unit has 2x2TB drives in it, and I have set it to mirror one drive to the other - so I have 2TB of useable space.
1. I always tend to use FAT32 in case I ever want to connect a Windows machine to use it, which isnt very often TBH - but at least I know I can if need be. I dont save any files larger then 4GB onto the drive. Should I stick with FAT32 or move over to HFS+ ? Are there any other benefits to HFS+ over FAT32 other then larger file sizes etc?
2. Is Firewire 800 Hot Swappable - or do I need to connect the drive with my MBP off, then boot up?
I use my MacBook Pro for most everything except at home where I have a desktop system that's a few years old. The MacBook Pro should generally run rings around it except for disk performance and that's something that I'd like to fix. So I picked up a 1 TB MyBook and it's attached to the MacBook Pro right now but the MBP doesn't see the disk. I assume that I need to partition and format the drive.
The MacBook Pro currently has Mac OSX and Windows XP on the internal drive and they work just fine. What I'd like to do is to be able to boot Mac OSX, WinXP x64 and Win32 off of the 1 TB drive. I was hoping to partition it into three pieces and boot whichever OS I wanted at the time.
What I'd like to know is if it is possible to do this (3 OS on one external drive that the Mac could boot from) and how to go about setting this up. I would grab XP x64 and XP Win32 off another machine (that machine has three Windows licenses running) and move them to the MacBook Pro (with Microsoft's help if needed).
